[Thu Jun  6 12:13:46 2013] Detection parameters:
  Position = (307.8, 247.0) = 12 53 2.05 -9 14 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.2 +/- 12.1
  Background counts = 23.0
  Rate = 0.008 +/- 0.002

[Thu Jun  6 12:13:46 2013] Off-axis axis estimate = 3.79'
[Thu Jun  6 12:15:32 2013] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 12:15:32 2013] Initial guess for spatial extent in simple fitting = 8.32"
[Thu Jun  6 12:15:32 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.859
[Thu Jun  6 12:15:32 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 8.32"
[Thu Jun  6 13:20:43 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jun  6 13:20:43 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jun  6 13:20:43 2013] Fit fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src21 appears to have run properly
[Thu Jun  6 13:20:44 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jun  6 13:20:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun  6 13:20:44 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jun  6 13:20:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun  6 13:20:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 14:59:13 2013] Warning, spatial fit 21 centroid is now closest to src. 21
[Thu Jun  6 14:59:13 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 14:59:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 14:59:13 2013] Assessing source extent using major
[Thu Jun  6 14:59:13 2013] Source does appear to be extended
[Thu Jun  6 14:59:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 14:59:13 2013] Source is confused with source 20
[Thu Jun  6 14:59:28 2013] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 14:59:28 2013] Initial guess for spatial extent in simple fitting = 8.32"
[Thu Jun  6 14:59:28 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.859
[Thu Jun  6 14:59:28 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 8.32"
[Thu Jun  6 16:18:37 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jun  6 16:18:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src21.csv
[Thu Jun  6 16:18:37 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jun  6 16:18:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src21.csv
[Thu Jun  6 16:18:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 16:18:38 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jun  6 16:18:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Jun  6 16:18:38 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jun  6 16:18:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Jun  6 16:18:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 17:38:06 2013] Spatial fit model total counts = 299.681000, observed total counts = 609.000000
[Thu Jun  6 17:38:06 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 17:38:06 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 17:38:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 17:38:06 2013] Assessing source extent using major
[Thu Jun  6 17:38:06 2013] Source does appear to be extended
[Thu Jun  6 17:38:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 17:38:21 2013] XMMSAS src. selection expression = ellipse(26732.366333, 21443.230698, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  6 17:38:21 2013] Writing source region out to fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src23_src.reg
[Thu Jun  6 17:38:21 2013] Extracting stamp from image fullrun_pn_xmm0112270701_pi300-10000_cl_sm2.00.img.gz, (270, 210) - (345, 285)
[Thu Jun  6 17:38:21 2013] XMMSAS bgd. selection expression = annulus(26732.366333, 21443.230698, 1087.500000, 2175.000000, X, Y) && !ellipse(25559.476400, 23664.265800, 1182.568034, 937.712027, 343.830000, X, Y) && !ellipse(27255.367279, 24293.143127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27202.418030, 23080.527527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25979.490295, 22718.705444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26583.124000, 22505.282000, 405.943212, 405.943212, 0.000000, X, Y) && !ellipse(25337.103302, 22316.014496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24850.226685, 22211.819199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27093.798126, 21982.184387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26081.672000, 21955.264000, 966.368028, 550.984816, 339.020000, X, Y) && !ellipse(25501.523956, 21860.123398, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 17:38:21 2013] Writing fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src23.gif
[Thu Jun  6 17:51:19 2013] Mean detx,y = (-34.37, -2856.83) 
[Thu Jun  6 17:51:21 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 17:51:37 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 17:51:37 2013] Setting source spectrum file to fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Jun  6 17:51:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Jun  6 18:17:16 2013] Not generating rmf since there are only 56 counts
[Thu Jun  6 18:17:16 2013] rmf not generated due to insufficient counts
[Thu Jun  6 19:12:25 2013] Updating aperture counts using extracted products
[Thu Jun  6 19:12:25 2013] Total counts from fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 371.00
[Thu Jun  6 19:12:25 2013] Total counts from fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src23_bgd.pi.gz = 697.00
[Thu Jun  6 19:12:25 2013] Got source and background scale factors 1258996.000000, 6036153.000000
[Thu Jun  6 19:12:25 2013] User source parameters:
  Position = (307.8, 247.0) = 12 53 2.05 -9 14 2.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 225.6 +/- 20.3
  Background aperture counts = 145.4
  Rate = 0.02 +/- 0.002

[Thu Jun  6 19:12:25 2013] Updating counts from extracted products
[Thu Jun  6 19:12:25 2013] Set source signif. to 225.62/12.06 = 18.71
[Thu Jun  6 19:12:26 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 19:12:26 2013] Using photon index=1.80, rate=0.0246, arf fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src23.arf
[Thu Jun  6 19:12:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 19:12:26 2013] Updating source flux to 8.2e-14
[Thu Jun  6 19:12:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun  6 19:12:42 2013] xmm0112270701/analysis//spectral/fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete