[Thu Jun  6 12:13:46 2013] Detection parameters:
  Position = (299.6, 253.5) = 12 53 4.47 -9 13 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 259.3 +/- 22.9
  Background counts = 25.0
  Rate = 0.04 +/- 0.004

[Thu Jun  6 12:13:46 2013] Off-axis axis estimate = 3.26'
[Thu Jun  6 12:15:32 2013] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 12:15:32 2013] Initial guess for spatial extent in simple fitting = 8.06"
[Thu Jun  6 12:15:32 2013] source mask rpix=1.9, npix_max = 22, mask sum = 9, frac = 0.406
[Thu Jun  6 12:15:32 2013] Skipping simple spatial due to low active detector fraction
[Thu Jun  6 14:59:13 2013] Spatial fit model total counts = 669.509000, observed total counts = 609.000000
[Thu Jun  6 14:59:13 2013] Offset between fit and detection position for source 21 = 0.920491 pixels
[Thu Jun  6 14:59:13 2013] Warning, changing simple spatial fit ID from -1 to 21
[Thu Jun  6 14:59:13 2013] 675.339700 total counts/ 583.146000 bgd. counts: snr = 3.817795
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.920491 pixels
  Position = (300.3, 252.9) = 12 53 4.25 -9 13 37.6
  Extent = 12.1 (6.3-16.6)" x 6.9 (2.1-11.6)", rotation angle = 339 (297-0) degrees
  Source counts = 92.2 +/- 26.0
  Background counts = 583.1
  Rate = 0.01 +/- 0.003
[Thu Jun  6 14:59:13 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 14:59:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 14:59:13 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 14:59:13 2013] Source does appear to be extended
[Thu Jun  6 14:59:13 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.54
[Thu Jun  6 14:59:13 2013] Source is confused with source 22
[Thu Jun  6 14:59:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  6 14:59:28 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Thu Jun  6 14:59:28 2013] source mask rpix=2.2, npix_max = 28, mask sum = 16, frac = 0.557
[Thu Jun  6 14:59:28 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 9.48"
[Thu Jun  6 16:18:37 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src19.ximg exists
[Thu Jun  6 16:18:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src19.csv
[Thu Jun  6 16:18:37 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Jun  6 16:18:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src19.csv
[Thu Jun  6 16:18:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 16:18:38 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Jun  6 16:18:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu Jun  6 16:18:38 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Jun  6 16:18:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu Jun  6 16:18:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 17:38:06 2013] Warning, spatial fit 19 centroid is now closest to src. 16
[Thu Jun  6 17:38:06 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 17:38:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 17:38:06 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 17:38:06 2013] Source does appear to be extended
[Thu Jun  6 17:38:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.54
[Thu Jun  6 17:38:21 2013] XMMSAS src. selection expression = ellipse(26081.672000, 21955.264000, 724.776021, 413.238612, 339.020000, X, Y)
[Thu Jun  6 17:38:21 2013] Writing source region out to fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src21_src.reg
[Thu Jun  6 17:38:21 2013] Extracting stamp from image fullrun_pn_xmm0112270701_pi300-10000_cl_sm2.00.img.gz, (259, 211) - (342, 295)
[Thu Jun  6 17:38:21 2013] XMMSAS bgd. selection expression = annulus(26081.672000, 21955.264000, 1207.960035, 2415.920070, X, Y) && !ellipse(25559.476400, 23664.265800, 1182.568034, 937.712027, 343.830000, X, Y) && !ellipse(25289.924000, 24886.218000, 1019.603163, 1019.603163, 0.000000, X, Y) && !ellipse(27255.367279, 24293.143127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.540253, 23441.197327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27202.418030, 23080.527527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22889.556580, 22850.817047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25979.490295, 22718.705444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26583.124000, 22505.282000, 405.943212, 405.943212, 0.000000, X, Y) && !ellipse(25337.103302, 22316.014496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24850.226685, 22211.819199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27093.798126, 21982.184387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25501.523956, 21860.123398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26732.366333, 21443.230698, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 17:38:21 2013] Writing fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src21.gif
[Thu Jun  6 17:50:35 2013] Mean detx,y = (341.09, -2193.21) 
[Thu Jun  6 17:50:37 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 17:50:52 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 17:50:52 2013] Setting source spectrum file to fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Jun  6 17:50:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu Jun  6 18:17:04 2013] Not generating rmf since there are only 92 counts
[Thu Jun  6 18:17:04 2013] rmf not generated due to insufficient counts
[Thu Jun  6 19:12:24 2013] Updating aperture counts using extracted products
[Thu Jun  6 19:12:24 2013] Total counts from fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 487.00
[Thu Jun  6 19:12:24 2013] Total counts from fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src21_bgd.pi.gz = 856.00
[Thu Jun  6 19:12:25 2013] Got source and background scale factors 719039.000000, 5910215.000000
[Thu Jun  6 19:12:25 2013] User source parameters:
  Position = (300.3, 252.9) = 12 53 4.25 -9 13 37.6
  Extent = 12.1 (6.3-16.6)" x 6.9 (2.1-11.6)", rotation angle = 339 (297-0) degrees
  Source aperture counts = 382.9 +/- 23.1
  Background aperture counts = 104.1
  Rate = 0.04 +/- 0.003

[Thu Jun  6 19:12:26 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 19:12:26 2013] Using photon index=1.80, rate=0.0101, arf fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src21.arf
[Thu Jun  6 19:12:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 19:12:26 2013] Updating source flux to 3.7e-14
[Thu Jun  6 19:12:38 2013] Flag c found in src. 21 procflags, skipping spectral fitting
[Thu Jun  6 19:12:38 2013] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun  6 19:12:42 2013] xmm0112270701/analysis//spectral/fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete