[Thu Jun 6 12:13:45 2013] Detection parameters: Position = (286.2, 255.9) = 12 53 8.41 -9 13 17.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 64.5 +/- 13.2 Background counts = 26.6 Rate = 0.01 +/- 0.002 [Thu Jun 6 12:13:46 2013] Off-axis axis estimate = 3.21' [Thu Jun 6 12:15:32 2013] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 12:15:32 2013] Initial guess for spatial extent in simple fitting = 8.03" [Thu Jun 6 12:15:32 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908 [Thu Jun 6 12:15:32 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 8.03" [Thu Jun 6 13:20:43 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src18.ximg exists [Thu Jun 6 13:20:43 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src18.csv [Thu Jun 6 13:20:43 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src18_1.ximg exists [Thu Jun 6 13:20:43 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src18.csv [Thu Jun 6 13:20:43 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 13:20:44 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src18.ximg exists [Thu Jun 6 13:20:44 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src18.csv [Thu Jun 6 13:20:44 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists [Thu Jun 6 13:20:44 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src18.csv [Thu Jun 6 13:20:44 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 14:59:13 2013] Source 19 is offset by 0.878698 and -8.733136 pixels which is larger than 2 X fitted extent = 0.913517 x 1.100115, not incorporating fit results [Thu Jun 6 14:59:13 2013] Source 19 is offset by 7.421111 and 6.202359 pixels which is larger than 2 X fitted extent = 7.387908 x 7.387908, not incorporating fit results [Thu Jun 6 14:59:13 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 14:59:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 14:59:13 2013] Assessing source extent using major [Thu Jun 6 14:59:13 2013] Source does appear to be extended [Thu Jun 6 14:59:13 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 14:59:13 2013] Source is confused with source 18 [Thu Jun 6 14:59:28 2013] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 14:59:28 2013] Initial guess for spatial extent in simple fitting = 8.03" [Thu Jun 6 14:59:28 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908 [Thu Jun 6 14:59:28 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 8.03" [Thu Jun 6 16:18:37 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src17.ximg exists [Thu Jun 6 16:18:37 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src17.csv [Thu Jun 6 16:18:37 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src17_1.ximg exists [Thu Jun 6 16:18:37 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src17.csv [Thu Jun 6 16:18:37 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 16:18:38 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src17.ximg exists [Thu Jun 6 16:18:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src17.csv [Thu Jun 6 16:18:38 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists [Thu Jun 6 16:18:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src17.csv [Thu Jun 6 16:18:38 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 17:38:06 2013] Source 19 is offset by 0.864399 and -8.731687 pixels which is larger than 2 X fitted extent = 0.913517 x 0.913517, not incorporating fit results [Thu Jun 6 17:38:06 2013] Spatial fit model total counts = -14.720000, observed total counts = 697.000000 [Thu Jun 6 17:38:06 2013] Poor agreement between spatial fit and data for source 19 It may help to tweak spatial fit manually Not incorporating fit results [Thu Jun 6 17:38:06 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 17:38:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 17:38:06 2013] Assessing source extent using major [Thu Jun 6 17:38:06 2013] Source does appear to be extended [Thu Jun 6 17:38:06 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 17:38:21 2013] XMMSAS src. selection expression = ellipse(24850.226685, 22211.819199, 652.500000, 652.500000, 0.000000, X, Y) [Thu Jun 6 17:38:21 2013] Writing source region out to fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src19_src.reg [Thu Jun 6 17:38:21 2013] Extracting stamp from image fullrun_pn_xmm0112270701_pi300-10000_cl_sm2.00.img.gz, (249, 218) - (324, 293) [Thu Jun 6 17:38:21 2013] XMMSAS bgd. selection expression = annulus(24850.226685, 22211.819199, 1087.500000, 2175.000000, X, Y) && !ellipse(25559.476400, 23664.265800, 1182.568034, 937.712027, 343.830000, X, Y) && !ellipse(25289.924000, 24886.218000, 1019.603163, 1019.603163, 0.000000, X, Y) && !ellipse(27255.367279, 24293.143127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.540253, 23441.197327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27202.418030, 23080.527527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22889.556580, 22850.817047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25979.490295, 22718.705444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26583.124000, 22505.282000, 405.943212, 405.943212, 0.000000, X, Y) && !ellipse(25337.103302, 22316.014496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27093.798126, 21982.184387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26081.672000, 21955.264000, 966.368028, 550.984816, 339.020000, X, Y) && !ellipse(25501.523956, 21860.123398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26732.366333, 21443.230698, 870.000000, 870.000000, 0.000000, X, Y) [Thu Jun 6 17:38:21 2013] Writing fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src19.gif [Thu Jun 6 17:49:34 2013] Mean detx,y = (1271.16, -1537.22) [Thu Jun 6 17:49:36 2013] Setting backscal keywords in source and bgd. spectrum [Thu Jun 6 17:50:02 2013] Binned source spectrum to 10 counts/bin [Thu Jun 6 17:50:03 2013] Setting source spectrum file to fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src19_src_b10.pi.gz [Thu Jun 6 17:50:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src19_bgd.pi.gz [Thu Jun 6 18:12:09 2013] Not generating rmf since there are only 64 counts [Thu Jun 6 18:12:09 2013] rmf not generated due to insufficient counts [Thu Jun 6 19:12:24 2013] Updating aperture counts using extracted products [Thu Jun 6 19:12:24 2013] Total counts from fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 501.00 [Thu Jun 6 19:12:24 2013] Total counts from fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src19_bgd.pi.gz = 508.00 [Thu Jun 6 19:12:24 2013] Got source and background scale factors 1095056.000000, 3235033.000000 [Thu Jun 6 19:12:24 2013] User source parameters: Position = (286.2, 255.9) = 12 53 8.41 -9 13 17.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 329.0 +/- 23.4 Background aperture counts = 172.0 Rate = 0.04 +/- 0.003 [Thu Jun 6 19:12:24 2013] Updating counts from extracted products [Thu Jun 6 19:12:24 2013] Set source signif. to 329.04/13.11 = 25.09 [Thu Jun 6 19:12:26 2013] Calculating source flux in energy range 0.30-8.00 [Thu Jun 6 19:12:26 2013] Using photon index=1.80, rate=0.0359, arf fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src19.arf [Thu Jun 6 19:12:26 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 6 19:12:26 2013] Updating source flux to 1.1e-13 [Thu Jun 6 19:12:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Jun 6 19:12:42 2013] xmm0112270701/analysis//spectral/fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete