[Thu Jun  6 12:13:45 2013] Detection parameters:
  Position = (294.9, 272.1) = 12 53 5.84 -9 12 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2794.4 +/- 63.8
  Background counts = 28.7
  Rate = 0.4 +/- 0.008

[Thu Jun  6 12:13:46 2013] Off-axis axis estimate = 1.92'
[Thu Jun  6 12:15:32 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 12:15:32 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Thu Jun  6 12:15:32 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Thu Jun  6 12:15:32 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.39"
[Thu Jun  6 13:20:43 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun  6 13:20:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src1.csv
[Thu Jun  6 13:20:43 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun  6 13:20:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src1.csv
[Thu Jun  6 13:20:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 13:20:43 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun  6 13:20:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun  6 13:20:43 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun  6 13:20:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun  6 13:20:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112270701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 14:59:13 2013] Spatial fit model total counts = 3491.670000, observed total counts = 6231.000000
[Thu Jun  6 14:59:13 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 14:59:13 2013] Spatial fit model total counts = 2790.590000, observed total counts = 1915.000000
[Thu Jun  6 14:59:13 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 14:59:13 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 14:59:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 14:59:13 2013] Assessing source extent using major
[Thu Jun  6 14:59:13 2013] Source does appear to be extended
[Thu Jun  6 14:59:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 14:59:28 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 14:59:28 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Thu Jun  6 14:59:28 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Thu Jun  6 14:59:28 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.39"
[Thu Jun  6 16:18:37 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun  6 16:18:37 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun  6 16:18:37 2013] Fit fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jun  6 16:18:38 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun  6 16:18:38 2013] fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun  6 16:18:38 2013] Fit fullrun_pn_xmm0112270701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun  6 17:38:06 2013] Spatial fit model total counts = 6585.390000, observed total counts = 6231.000000
[Thu Jun  6 17:38:06 2013] Offset between fit and detection position for source 1 = 0.727041 pixels
[Thu Jun  6 17:38:06 2013] 6620.010000 total counts/ 3320.810000 bgd. counts: snr = 57.251468
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.727041 pixels
  Position = (294.3, 272.6) = 12 53 6.01 -9 12 12.2
  Extent = 14.8 (14.4-29.6)" x 11.7 (10.9-12.5)", rotation angle = 344 (336-352) degrees
  Source counts = 3299.2 +/- 81.4
  Background counts = 3320.8
  Rate = 0.4 +/- 0.009
[Thu Jun  6 17:38:06 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 17:38:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 17:38:06 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 17:38:06 2013] Source does appear to be extended
[Thu Jun  6 17:38:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.15
[Thu Jun  6 17:38:20 2013] Counts = 3299.200000, rescaling region sizes by 2.000000
[Thu Jun  6 17:38:20 2013] XMMSAS src. selection expression = ellipse(25559.476400, 23664.265800, 1773.852051, 1406.568040, 343.830000, X, Y)
[Thu Jun  6 17:38:20 2013] Writing source region out to fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun  6 17:38:20 2013] Extracting stamp from image fullrun_pn_xmm0112270701_pi300-10000_cl_sm2.00.img.gz, (192, 171) - (396, 375)
[Thu Jun  6 17:38:20 2013] XMMSAS bgd. selection expression = annulus(25559.476400, 23664.265800, 5912.840170, 11825.680340, X, Y) && !ellipse(32723.267365, 35971.127533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20562.453820, 34973.745200, 386.048011, 386.048011, 0.000000, X, Y) && !ellipse(15586.534600, 29927.323200, 1222.456035, 558.371216, 342.373857, X, Y) && !ellipse(25731.077789, 28234.919098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25289.924000, 24886.218000, 1019.603163, 1019.603163, 0.000000, X, Y) && !ellipse(27255.367279, 24293.143127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.540253, 23441.197327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27202.418030, 23080.527527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14115.671097, 23019.809662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22889.556580, 22850.817047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25979.490295, 22718.705444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26583.124000, 22505.282000, 405.943212, 405.943212, 0.000000, X, Y) && !ellipse(25337.103302, 22316.014496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24850.226685, 22211.819199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27093.798126, 21982.184387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26081.672000, 21955.264000, 966.368028, 550.984816, 339.020000, X, Y) && !ellipse(25501.523956, 21860.123398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26732.366333, 21443.230698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14405.572418, 18518.279175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26070.579041, 16588.005173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29341.809200, 15098.301200, 539.969616, 394.091211, 316.331365, X, Y)
[Thu Jun  6 17:38:20 2013] Writing fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src1.gif
[Thu Jun  6 17:38:27 2013] Mean detx,y = (147.90, -433.11) 
[Thu Jun  6 17:38:30 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 17:42:58 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 17:42:58 2013] Setting source spectrum file to fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun  6 17:42:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun  6 19:12:20 2013] Updating aperture counts using extracted products
[Thu Jun  6 19:12:20 2013] Total counts from fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 10660.00
[Thu Jun  6 19:12:21 2013] Total counts from fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src1_bgd.pi.gz = 17199.00
[Thu Jun  6 19:12:21 2013] Got source and background scale factors 7008830.000000, 288362659.000000
[Thu Jun  6 19:12:21 2013] User source parameters:
  Position = (294.3, 272.6) = 12 53 6.01 -9 12 12.2
  Extent = 14.8 (14.4-29.6)" x 11.7 (10.9-12.5)", rotation angle = 344 (336-352) degrees
  Source aperture counts = 10242.0 +/- 104.3
  Background aperture counts = 418.0
  Rate = 1 +/- 0.01

[Thu Jun  6 19:12:26 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 19:12:26 2013] Using photon index=1.80, rate=0.36, arf fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src1.arf
[Thu Jun  6 19:12:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 19:12:26 2013] Updating source flux to 9.6e-13
[Thu Jun  6 19:12:38 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Thu Jun  6 19:12:42 2013] xmm0112270701/analysis//spectral/fullrun_pn_xmm0112270701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete