[Wed May 30 22:03:43 2012] Detection parameters:
  Position = (481.9, 253.0) = 11 21 21.88 24 15 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.5 +/- 17.9
  Background counts = 22.0
  Rate = 0.02 +/- 0.002

[Wed May 30 22:03:44 2012] Off-axis axis estimate = 13.70'
[Wed May 30 22:05:09 2012] Using EEF radius (= 13.28 ")to estimate initial spatial extent for simple fitting
[Wed May 30 22:05:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 22:05:09 2012] Initial guess for spatial extent in simple fitting = 13.28"
[Wed May 30 22:05:09 2012] source mask rpix=3.1, npix_max = 50, mask sum = 55, frac = 1.089
[Wed May 30 22:05:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.28"
[Wed May 30 22:34:30 2012] fullrun_pn_xmm0112270301_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 30 22:34:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270301_pi300-10000_cl_pass0_src1.csv
[Wed May 30 22:34:30 2012] fullrun_pn_xmm0112270301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 30 22:34:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270301_pi300-10000_cl_pass0_src1.csv
[Wed May 30 22:34:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112270301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112270301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 22:34:31 2012] fullrun_pn_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 30 22:34:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 30 22:34:31 2012] fullrun_pn_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 30 22:34:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 30 22:34:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:14:22 2012] Source 1 is offset by -6.396271 and -7.344025 pixels which is larger than
2 X fitted extent = 0.850308 x 0.850308, not incorporating fit results
[Wed May 30 23:14:22 2012] Vigneting correction estimate = 1.000000
[Wed May 30 23:14:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 23:14:22 2012] Assessing source extent using major
[Wed May 30 23:14:22 2012] Source does appear to be extended
[Wed May 30 23:14:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 23:14:35 2012] Using EEF radius (= 13.28 ")to estimate initial spatial extent for simple fitting
[Wed May 30 23:14:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 23:14:35 2012] Initial guess for spatial extent in simple fitting = 13.28"
[Wed May 30 23:14:35 2012] source mask rpix=3.1, npix_max = 50, mask sum = 55, frac = 1.089
[Wed May 30 23:14:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.28"
[Wed May 30 23:40:57 2012] fullrun_pn_xmm0112270301_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 30 23:40:57 2012] fullrun_pn_xmm0112270301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 30 23:40:57 2012] Fit fullrun_pn_xmm0112270301_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed May 30 23:40:57 2012] fullrun_pn_xmm0112270301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 30 23:40:57 2012] fullrun_pn_xmm0112270301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 30 23:40:57 2012] Fit fullrun_pn_xmm0112270301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 31 00:17:39 2012] Spatial fit model total counts = 527.429000, observed total counts = 492.000000
[Thu May 31 00:17:39 2012] Offset between fit and detection position for source 1 = 0.255046 pixels
[Thu May 31 00:17:39 2012] 517.296000 total counts/ 394.548000 bgd. counts: snr = 6.179659
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.255046 pixels
  Position = (481.7, 252.9) = 11 21 21.96 24 15 58.8
  Extent = 9.2" x 3.9", rotation angle = 90
  Source counts = 122.7 +/- 22.7
  Background counts = 394.5
  Rate = 0.01 +/- 0.003
[Thu May 31 00:17:39 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:17:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:17:39 2012] Assessing source extent using major
[Thu May 31 00:17:39 2012] Source does appear to be extended
[Thu May 31 00:17:39 2012] Computing asymmetry using major and minor axis, asym = 2.34
[Thu May 31 00:17:39 2012] Source is asymmetric
[Thu May 31 00:17:52 2012] XMMSAS src. selection expression = ellipse(41855.269271, 21956.581188, 552.939931, 236.801072, 90.000000, X, Y)
[Thu May 31 00:17:52 2012] Writing source region out to fullrun_pn_xmm0112270301_pi300-10000_pass1_cl_src1_src.reg
[Thu May 31 00:17:52 2012] Extracting stamp from image fullrun_pn_xmm0112270301_pi300-10000_cl_sm2.00.img.gz, (450, 221) - (513, 285)
[Thu May 31 00:17:52 2012] XMMSAS bgd. selection expression = annulus(41855.269271, 21956.581188, 921.566552, 1843.133104, X, Y)
[Thu May 31 00:17:52 2012] Writing fullrun_pn_xmm0112270301_pi300-10000_pass1_cl_src1.gif
[Thu May 31 00:17:57 2012] Mean detx,y = (-13511.98, -9220.27) 
[Thu May 31 00:17:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 00:18:14 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 00:18:14 2012] Setting source spectrum file to fullrun_pn_xmm0112270301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 00:18:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112270301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 31 00:58:29 2012] Updating aperture counts using extracted products
[Thu May 31 00:58:29 2012] Error reading totcts from fullrun_pn_xmm0112270301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 00:58:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 00:58:30 2012] Using photon index=1.80, rate=0.0138, arf fullrun_pn_xmm0112270301_pi300-10000_pass1_cl_src1.arf
[Thu May 31 00:58:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 00:58:30 2012] Updating source flux to 1.4e-13
[Thu May 31 00:58:48 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Thu May 31 00:59:04 2012] Reading fit data from xmm0112270301/analysis//spectral/fullrun_pn_xmm0112270301_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 31 00:59:04 2012] Spectral fit parameter nH value = 3.57585e+20
[Thu May 31 00:59:04 2012] Spectral fit parameter PhoIndex value = 2.83601
[Thu May 31 00:59:04 2012] Failed to get F(0.3-8.0) from xmm0112270301/analysis//spectral/fullrun_pn_xmm0112270301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 31 00:59:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 00:59:04 2012] Using Nh = 3.6e+20, photon index=2.84, rate=0.0138, arf fullrun_pn_xmm0112270301_pi300-10000_pass1_cl_src1.arf
[Thu May 31 00:59:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 00:59:04 2012] Updating source flux to 8.9e-14