[Wed May 30 22:04:17 2012] Detection parameters:
  Position = (199.8, 192.0) = 11 22 51.59 24 11 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.4 +/- 8.3
  Background counts = 6.8
  Rate = 0.005 +/- 0.001

[Wed May 30 22:04:17 2012] Off-axis axis estimate = 10.52'
[Wed May 30 22:55:37 2012] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Wed May 30 22:55:37 2012] Initial guess for spatial extent in simple fitting = 11.69"
[Wed May 30 22:55:37 2012] source mask rpix=2.7, npix_max = 40, mask sum = 35, frac = 0.862
[Wed May 30 22:55:37 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.69"
[Wed May 30 23:14:18 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 30 23:14:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_src3.csv
[Wed May 30 23:14:18 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 30 23:14:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_src3.csv
[Wed May 30 23:14:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:14:18 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 30 23:14:18 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 30 23:14:18 2012] Fit fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 30 23:14:28 2012] Spatial fit model total counts = 96.114200, observed total counts = 96.000000
[Wed May 30 23:14:28 2012] Offset between fit and detection position for source 16 = 0.279512 pixels
[Wed May 30 23:14:28 2012] 95.363600 total counts/ 66.460800 bgd. counts: snr = 3.545334
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.279512 pixels
  Position = (200.1, 192.0) = 11 22 51.51 24 11 34.4
  Extent = 5.8 (3.7-9.0)", rotation angle = 0
  Source counts = 28.9 +/- 9.8
  Background counts = 66.5
  Rate = 0.002 +/- 0.0007
[Wed May 30 23:14:28 2012] Vigneting correction estimate = 1.000000
[Wed May 30 23:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 23:14:28 2012] Assessing source extent using major axis lower bound
[Wed May 30 23:14:28 2012] Source does appear to be extended
[Wed May 30 23:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 23:58:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 23:58:12 2012] Initial guess for spatial extent in simple fitting = 5.85"
[Wed May 30 23:58:12 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.176
[Wed May 30 23:58:12 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.85"
[Thu May 31 00:17:34 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 31 00:17:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_src3.csv
[Thu May 31 00:17:34 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 31 00:17:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_src3.csv
[Thu May 31 00:17:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:17:34 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 31 00:17:34 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 31 00:17:34 2012] Fit fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May 31 00:17:45 2012] Spatial fit model total counts = 90.951400, observed total counts = 91.000000
[Thu May 31 00:17:45 2012] Offset between fit and detection position for source 16 = 0.039073 pixels
[Thu May 31 00:17:45 2012] 89.337200 total counts/ 60.724400 bgd. counts: snr = 3.671798
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.039073 pixels
  Position = (200.1, 192.0) = 11 22 51.50 24 11 34.3
  Extent = 5.8 (3.7-8.8)", rotation angle = 0
  Source counts = 28.6 +/- 9.5
  Background counts = 60.7
  Rate = 0.002 +/- 0.0007
[Thu May 31 00:17:45 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:17:45 2012] Assessing source extent using major axis lower bound
[Thu May 31 00:17:45 2012] Source does appear to be extended
[Thu May 31 00:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:49:41 2012] XMMSAS src. selection expression = ellipse(17362.430700, 16657.985800, 349.414210, 349.414210, 0.000000, X, Y)
[Thu May 31 00:49:41 2012] Writing source region out to fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src16_src.reg
[Thu May 31 00:49:41 2012] Extracting stamp from image fullrun_mos2_xmm0112270301_pi300-10000_cl_sm2.00.img.gz, (180, 172) - (220, 212)
[Thu May 31 00:49:41 2012] XMMSAS bgd. selection expression = annulus(17362.430700, 16657.985800, 582.357017, 1164.714034, X, Y)
[Thu May 31 00:49:41 2012] Writing fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src16.gif
[Thu May 31 00:50:03 2012] Mean detx,y = (-10579.70, 2918.38) 
[Thu May 31 00:50:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 00:50:08 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 00:50:09 2012] Setting source spectrum file to fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu May 31 00:50:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu May 31 00:57:02 2012] Not generating rmf since there are only 28 counts
[Thu May 31 00:57:02 2012] rmf not generated due to insufficient counts
[Thu May 31 00:58:30 2012] Updating aperture counts using extracted products
[Thu May 31 00:58:30 2012] Error reading totcts from fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu May 31 00:58:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 00:58:30 2012] Using photon index=1.80, rate=0.00201, arf fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src16.arf
[Thu May 31 00:58:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 00:58:30 2012] Updating source flux to 4.2e-14
[Thu May 31 00:58:40 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting