[Wed May 30 22:04:16 2012] Detection parameters:
  Position = (279.1, 279.9) = 11 22 26.39 24 17 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 221.4 +/- 19.5
  Background counts = 22.5
  Rate = 0.02 +/- 0.001

[Wed May 30 22:04:17 2012] Off-axis axis estimate = 1.94'
[Wed May 30 22:55:37 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Wed May 30 22:55:37 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Wed May 30 22:55:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.826
[Wed May 30 22:55:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.40"
[Wed May 30 23:14:18 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 30 23:14:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_src1.csv
[Wed May 30 23:14:18 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 30 23:14:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_src1.csv
[Wed May 30 23:14:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:14:18 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 30 23:14:18 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 30 23:14:18 2012] Fit fullrun_mos2_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 30 23:14:28 2012] Spatial fit model total counts = 661.218000, observed total counts = 613.000000
[Wed May 30 23:14:28 2012] Offset between fit and detection position for source 1 = 0.110884 pixels
[Wed May 30 23:14:28 2012] 655.266000 total counts/ 513.007000 bgd. counts: snr = 6.280845
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.110884 pixels
  Position = (279.1, 279.8) = 11 22 26.39 24 17 56.2
  Extent = 6.9 (5.0-9.2)", rotation angle = 0
  Source counts = 142.3 +/- 25.6
  Background counts = 513.0
  Rate = 0.01 +/- 0.002
[Wed May 30 23:14:28 2012] Spatial fit model total counts = 533.298000, observed total counts = 525.000000
[Wed May 30 23:14:28 2012] Offset between fit and detection position for source 1 = 0.106582 pixels
[Wed May 30 23:14:28 2012] Warning, changing simple spatial fit ID from 1 to 6
[Wed May 30 23:14:28 2012] 528.714100 total counts/ 435.984000 bgd. counts: snr = 4.441048
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.106582 pixels
  Position = (279.0, 279.7) = 11 22 26.41 24 17 55.8
  Extent = 5.3 (3.9-7.3)", rotation angle = 0
  Source counts = 92.7 +/- 23.0
  Background counts = 436.0
  Rate = 0.007 +/- 0.002
[Wed May 30 23:14:28 2012] Vigneting correction estimate = 1.000000
[Wed May 30 23:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 23:14:28 2012] Assessing source extent using major axis lower bound
[Wed May 30 23:14:28 2012] Source does appear to be extended
[Wed May 30 23:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 23:14:28 2012] Source is confused with source 13
[Wed May 30 23:58:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 23:58:12 2012] Initial guess for spatial extent in simple fitting = 5.34"
[Wed May 30 23:58:12 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.005
[Wed May 30 23:58:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.34"
[Thu May 31 00:17:34 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 31 00:17:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_src1.csv
[Thu May 31 00:17:34 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 31 00:17:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_src1.csv
[Thu May 31 00:17:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:17:34 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 31 00:17:34 2012] fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 31 00:17:34 2012] Fit fullrun_mos2_xmm0112270301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 31 00:17:45 2012] Spatial fit model total counts = 668.888000, observed total counts = 619.000000
[Thu May 31 00:17:45 2012] Offset between fit and detection position for source 1 = 0.094644 pixels
[Thu May 31 00:17:45 2012] 664.806000 total counts/ 522.126000 bgd. counts: snr = 6.244180
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.094644 pixels
  Position = (279.1, 279.7) = 11 22 26.39 24 17 56.1
  Extent = 6.9 (5.0-9.3)", rotation angle = 0
  Source counts = 142.7 +/- 25.8
  Background counts = 522.1
  Rate = 0.01 +/- 0.002
[Thu May 31 00:17:45 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:17:45 2012] Assessing source extent using major axis lower bound
[Thu May 31 00:17:45 2012] Source does appear to be extended
[Thu May 31 00:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:49:41 2012] XMMSAS src. selection expression = ellipse(24234.630460, 24289.202200, 415.590012, 415.590012, 0.000000, X, Y)
[Thu May 31 00:49:41 2012] Writing source region out to fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src1_src.reg
[Thu May 31 00:49:41 2012] Extracting stamp from image fullrun_mos2_xmm0112270301_pi300-10000_cl_sm2.00.img.gz, (255, 256) - (303, 304)
[Thu May 31 00:49:41 2012] XMMSAS bgd. selection expression = annulus(24234.630460, 24289.202200, 692.650020, 1385.300040, X, Y) && !ellipse(23704.833771, 24646.570007, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 00:49:41 2012] Writing fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src1.gif
[Thu May 31 00:49:44 2012] Mean detx,y = (-1035.63, -908.01) 
[Thu May 31 00:49:45 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 00:49:51 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 00:49:51 2012] Setting source spectrum file to fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 00:49:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 31 00:58:30 2012] Updating aperture counts using extracted products
[Thu May 31 00:58:30 2012] Error reading totcts from fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 00:58:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 00:58:30 2012] Using photon index=1.80, rate=0.01, arf fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src1.arf
[Thu May 31 00:58:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 00:58:30 2012] Updating source flux to 1e-13
[Thu May 31 00:58:40 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu May 31 00:58:48 2012] Reading fit data from xmm0112270301/analysis//spectral/fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 31 00:58:48 2012] Spectral fit parameter nH value = 3.41401e+21
[Thu May 31 00:58:48 2012] Spectral fit parameter PhoIndex value = 4.20234
[Thu May 31 00:58:48 2012] Failed to get F(0.3-8.0) from xmm0112270301/analysis//spectral/fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 31 00:58:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 00:58:48 2012] Using Nh = 3.4e+21, photon index=4.20, rate=0.01, arf fullrun_mos2_xmm0112270301_pi300-10000_pass1_cl_src1.arf
[Thu May 31 00:58:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 00:58:48 2012] Updating source flux to 6.7e-14