[Wed May 30 22:03:59 2012] Detection parameters:
  Position = (209.3, 118.8) = 11 22 48.56 24 6 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.8 +/- 7.8
  Background counts = 6.2
  Rate = 0.002 +/- 0.0005

[Wed May 30 22:03:59 2012] Off-axis axis estimate = 14.54'
[Wed May 30 22:34:31 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Wed May 30 22:34:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 22:34:31 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Wed May 30 22:34:31 2012] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.920
[Wed May 30 22:34:31 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 13.70"
[Wed May 30 22:55:37 2012] fullrun_mos1_xmm0112270301_pi300-10000_cl_pass0_src17.ximg exists
[Wed May 30 22:55:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112270301_pi300-10000_cl_pass0_src17.csv
[Wed May 30 22:55:37 2012] fullrun_mos1_xmm0112270301_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed May 30 22:55:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112270301_pi300-10000_cl_pass0_src17.csv
[Wed May 30 22:55:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112270301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112270301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 22:55:37 2012] fullrun_mos1_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed May 30 22:55:37 2012] fullrun_mos1_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed May 30 22:55:37 2012] Fit fullrun_mos1_xmm0112270301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed May 30 23:14:25 2012] Spatial fit model total counts = 108.207000, observed total counts = 109.000000
[Wed May 30 23:14:25 2012] Offset between fit and detection position for source 18 = 0.362349 pixels
[Wed May 30 23:14:25 2012] 108.871500 total counts/ 93.436400 bgd. counts: snr = 1.596803
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.362349 pixels
  Position = (209.6, 118.7) = 11 22 48.45 24 6 15.3
  Extent = 3.6 (3.4-5.3)", rotation angle = 0
  Source counts = 15.4 +/- 10.4
  Background counts = 93.4
  Rate = 0.001 +/- 0.0007
  Deleting source due to low Poisson probability