[Tue May 14 00:45:20 2013] Detection parameters:
  Position = (322.9, 384.3) = 2 59 48.96 13 52 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.6 +/- 6.9
  Background counts = 3.8
  Rate = 0.004 +/- 0.0008

[Tue May 14 00:45:21 2013] Off-axis axis estimate = 6.47'
[Tue May 14 00:45:48 2013] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:45:48 2013] Initial guess for spatial extent in simple fitting = 9.66"
[Tue May 14 00:45:48 2013] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.945
[Tue May 14 00:45:48 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 9.66"
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src8.ximg exists
[Tue May 14 00:45:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src8.csv
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue May 14 00:45:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src8.csv
[Tue May 14 00:45:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue May 14 00:45:49 2013] Fit fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Tue May 14 00:46:07 2013] Spatial fit model total counts = 69.046900, observed total counts = 74.000000
[Tue May 14 00:46:07 2013] Offset between fit and detection position for source 9 = 0.131874 pixels
[Tue May 14 00:46:07 2013] 40.376500 total counts/ 18.454400 bgd. counts: snr = 5.103078
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.131874 pixels
  Position = (322.9, 384.1) = 2 59 48.96 13 52 2.5
  Extent = 4.5 (3.2-6.9)", rotation angle = 0
  Source counts = 21.9 +/- 6.4
  Background counts = 18.5
  Rate = 0.002 +/- 0.0005
[Tue May 14 00:46:07 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:07 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:46:07 2013] Source does appear to be extended
[Tue May 14 00:46:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:46:22 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 00:46:22 2013] Initial guess for spatial extent in simple fitting = 4.50"
[Tue May 14 00:46:22 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.955
[Tue May 14 00:46:22 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 4.50"
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src8.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src8.csv
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src8.csv
[Tue May 14 00:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue May 14 00:46:23 2013] Fit fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue May 14 00:46:39 2013] Spatial fit model total counts = 71.548900, observed total counts = 75.000000
[Tue May 14 00:46:39 2013] Offset between fit and detection position for source 9 = 0.060466 pixels
[Tue May 14 00:46:39 2013] 37.052300 total counts/ 14.966700 bgd. counts: snr = 5.708818
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.060466 pixels
  Position = (322.8, 384.1) = 2 59 48.98 13 52 2.5
  Extent = 4.6 (3.2-7.0)", rotation angle = 0
  Source counts = 22.1 +/- 6.1
  Background counts = 15.0
  Rate = 0.002 +/- 0.0005
[Tue May 14 00:46:39 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:39 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:46:39 2013] Source does appear to be extended
[Tue May 14 00:46:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:47:10 2013] XMMSAS src. selection expression = ellipse(28035.615600, 33372.071400, 274.756208, 274.756208, 0.000000, X, Y)
[Tue May 14 00:47:10 2013] Not overwriting source region fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_src.reg
[Tue May 14 00:47:10 2013] Extracting stamp from image fullrun_mos2_xmm0112260401_pi300-10000_cl_sm2.00.img.gz, (307, 368) - (339, 400)
[Tue May 14 00:47:10 2013] XMMSAS bgd. selection expression = annulus(28035.615600, 33372.071400, 457.927013, 915.854026, X, Y) && !ellipse(27381.956421, 33497.062378, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 00:47:10 2013] Writing fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9.gif
[Tue May 14 00:47:11 2013] ../../xmm0112260401/products/events/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0112260401/products/events/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Tue May 14 00:47:11 2013] Mean detx,y = (1079.17, 6120.71) 
[Tue May 14 00:47:11 2013] ../../xmm0112260401/products/images/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_src.img and ../../xmm0112260401/products/images/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Tue May 14 00:47:11 2013] ../../xmm0112260401/products/spectra/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_src.pi and ../../xmm0112260401/products/spectra/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Tue May 14 00:47:11 2013] Setting source spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_src.pi.gz
[Tue May 14 00:47:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue May 14 00:47:11 2013] ../../xmm0112260401/products/lightcurves/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0112260401/products/lightcurves/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Tue May 14 00:48:25 2013] Not generating rmf since there are only 22 counts
[Tue May 14 00:48:25 2013] rmf not generated due to insufficient counts
[Tue May 14 00:49:12 2013] Updating aperture counts using extracted products
[Tue May 14 00:49:12 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_src.pi.gz = 24.00
[Tue May 14 00:49:12 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_bgd.pi.gz = 17.00
[Tue May 14 00:49:12 2013] Got source and background scale factors 236800.000000, 912154.000000
[Tue May 14 00:49:12 2013] User source parameters:
  Position = (322.8, 384.1) = 2 59 48.98 13 52 2.5
  Extent = 4.6 (3.2-7.0)", rotation angle = 0
  Source aperture counts = 19.6 +/- 6.0
  Background aperture counts = 4.4
  Rate = 0.002 +/- 0.0005

[Tue May 14 00:49:15 2013] No arf file for this source, not re-computing flux
[Tue May 14 00:49:19 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 14 00:49:20 2013] xmm0112260401/analysis//spectral/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete