[Tue May 14 00:45:20 2013] Detection parameters:
  Position = (281.3, 164.0) = 3 0 1.39 13 36 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20.4 +/- 6.0
  Background counts = 3.8
  Rate = 0.002 +/- 0.0005

[Tue May 14 00:45:21 2013] Off-axis axis estimate = 9.82'
[Tue May 14 00:45:48 2013] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:45:48 2013] Initial guess for spatial extent in simple fitting = 11.34"
[Tue May 14 00:45:48 2013] source mask rpix=2.6, npix_max = 38, mask sum = 31, frac = 0.803
[Tue May 14 00:45:48 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 11.34"
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src16.ximg exists
[Tue May 14 00:45:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src16.csv
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue May 14 00:45:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src16.csv
[Tue May 14 00:45:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue May 14 00:45:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue May 14 00:45:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue May 14 00:45:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:07 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.285481 pixels away
[Tue May 14 00:46:07 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:07 2013] Assessing source extent using major
[Tue May 14 00:46:07 2013] Source does appear to be extended
[Tue May 14 00:46:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:46:22 2013] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:46:22 2013] Initial guess for spatial extent in simple fitting = 11.34"
[Tue May 14 00:46:22 2013] source mask rpix=2.6, npix_max = 38, mask sum = 31, frac = 0.803
[Tue May 14 00:46:22 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 11.34"
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src16.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src16.csv
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src16.csv
[Tue May 14 00:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue May 14 00:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:39 2013] Spatial fit model total counts = 63.260200, observed total counts = 57.000000
[Tue May 14 00:46:39 2013] Offset between fit and detection position for source 7 = 0.091193 pixels
[Tue May 14 00:46:39 2013] 63.929500 total counts/ 50.204000 bgd. counts: snr = 1.937131
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.091193 pixels
  Position = (281.3, 164.1) = 3 0 1.38 13 36 5.4
  Extent = 4.8 (2.8-7.8)", rotation angle = 0
  Source counts = 13.7 +/- 8.0
  Background counts = 50.2
  Rate = 0.001 +/- 0.0007
[Tue May 14 00:46:39 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:39 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:46:39 2013] Source does appear to be extended
[Tue May 14 00:46:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:47:10 2013] XMMSAS src. selection expression = ellipse(24423.568400, 14228.644200, 288.601208, 288.601208, 0.000000, X, Y)
[Tue May 14 00:47:10 2013] Not overwriting source region fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src7_src.reg
[Tue May 14 00:47:10 2013] Extracting stamp from image fullrun_mos2_xmm0112260401_pi300-10000_cl_sm2.00.img.gz, (265, 148) - (298, 181)
[Tue May 14 00:47:10 2013] XMMSAS bgd. selection expression = annulus(24423.568400, 14228.644200, 481.002014, 962.004028, X, Y)
[Tue May 14 00:47:10 2013] Writing fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src7.gif
[Tue May 14 00:47:48 2013] Mean detx,y = (-398.74, -13311.74) 
[Tue May 14 00:47:51 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 00:48:16 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 00:48:16 2013] Setting source spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue May 14 00:48:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue May 14 00:48:38 2013] Not generating rmf since there are only 13 counts
[Tue May 14 00:48:38 2013] rmf not generated due to insufficient counts
[Tue May 14 00:49:15 2013] Updating aperture counts using extracted products
[Tue May 14 00:49:15 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 19.00
[Tue May 14 00:49:15 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src7_bgd.pi.gz = 44.00
[Tue May 14 00:49:15 2013] Got source and background scale factors 257152.000000, 1991716.000000
[Tue May 14 00:49:15 2013] User source parameters:
  Position = (281.3, 164.1) = 3 0 1.38 13 36 5.4
  Extent = 4.8 (2.8-7.8)", rotation angle = 0
  Source aperture counts = 13.3 +/- 5.4
  Background aperture counts = 5.7
  Rate = 0.001 +/- 0.0005

[Tue May 14 00:49:15 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 00:49:15 2013] Using photon index=1.80, rate=0.00114, arf fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src7.arf
[Tue May 14 00:49:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 00:49:15 2013] Updating source flux to 3.8e-14
[Tue May 14 00:49:19 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 14 00:49:20 2013] xmm0112260401/analysis//spectral/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete