[Tue May 14 00:45:20 2013] Detection parameters:
  Position = (358.6, 424.0) = 2 59 38.29 13 54 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.2 +/- 16.9
  Background counts = 3.7
  Rate = 0.03 +/- 0.003

[Tue May 14 00:45:21 2013] Off-axis axis estimate = 10.10'
[Tue May 14 00:45:48 2013] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:45:48 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 14 00:45:48 2013] Initial guess for spatial extent in simple fitting = 11.48"
[Tue May 14 00:45:48 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.066
[Tue May 14 00:45:48 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.48"
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 14 00:45:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src1.csv
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 14 00:45:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src1.csv
[Tue May 14 00:45:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 14 00:45:49 2013] Fit fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 14 00:46:07 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.535186 pixels away
[Tue May 14 00:46:07 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:07 2013] Assessing source extent using major
[Tue May 14 00:46:07 2013] Source does appear to be extended
[Tue May 14 00:46:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:46:07 2013] Source is confused with source 6
[Tue May 14 00:46:22 2013] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:46:22 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 14 00:46:22 2013] Initial guess for spatial extent in simple fitting = 11.48"
[Tue May 14 00:46:22 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.066
[Tue May 14 00:46:22 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.48"
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src1.csv
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src1.csv
[Tue May 14 00:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 14 00:46:23 2013] Fit fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 14 00:46:39 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.535186 pixels away
[Tue May 14 00:46:39 2013] Spatial fit model total counts = 203.149000, observed total counts = 204.000000
[Tue May 14 00:46:39 2013] Offset between fit and detection position for source 4 = 0.612583 pixels
[Tue May 14 00:46:39 2013] Warning, changing simple spatial fit ID from 1 to 12
[Tue May 14 00:46:39 2013] 198.223500 total counts/ 78.736500 bgd. counts: snr = 13.465814
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.612583 pixels
  Position = (358.1, 423.7) = 2 59 38.45 13 54 54.7
  Extent = 6.5 (5.2-7.8)", rotation angle = 0
  Source counts = 119.5 +/- 14.1
  Background counts = 78.7
  Rate = 0.01 +/- 0.001
[Tue May 14 00:46:39 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:39 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:46:39 2013] Source does appear to be extended
[Tue May 14 00:46:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:47:10 2013] XMMSAS src. selection expression = ellipse(31102.050000, 36817.090000, 388.609211, 388.609211, 0.000000, X, Y)
[Tue May 14 00:47:10 2013] Not overwriting source region fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_src.reg
[Tue May 14 00:47:10 2013] Extracting stamp from image fullrun_mos2_xmm0112260401_pi300-10000_cl_sm2.00.img.gz, (336, 401) - (380, 446)
[Tue May 14 00:47:10 2013] XMMSAS bgd. selection expression = annulus(31102.050000, 36817.090000, 647.682019, 1295.364037, X, Y) && !ellipse(30772.444763, 37365.336517, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 00:47:10 2013] Writing fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4.gif
[Tue May 14 00:47:10 2013] ../../xmm0112260401/products/events/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0112260401/products/events/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue May 14 00:47:10 2013] Mean detx,y = (-998.50, 10262.75) 
[Tue May 14 00:47:10 2013] ../../xmm0112260401/products/images/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_src.img and ../../xmm0112260401/products/images/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue May 14 00:47:10 2013] ../../xmm0112260401/products/spectra/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_src.pi and ../../xmm0112260401/products/spectra/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue May 14 00:47:10 2013] Setting source spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_src.pi.gz
[Tue May 14 00:47:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue May 14 00:47:10 2013] ../../xmm0112260401/products/lightcurves/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0112260401/products/lightcurves/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue May 14 00:49:09 2013] Updating aperture counts using extracted products
[Tue May 14 00:49:09 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_src.pi.gz = 167.00
[Tue May 14 00:49:10 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 65.00
[Tue May 14 00:49:10 2013] Got source and background scale factors 478400.000000, 2522536.000000
[Tue May 14 00:49:10 2013] User source parameters:
  Position = (358.1, 423.7) = 2 59 38.45 13 54 54.7
  Extent = 6.5 (5.2-7.8)", rotation angle = 0
  Source aperture counts = 154.7 +/- 14.0
  Background aperture counts = 12.3
  Rate = 0.01 +/- 0.001

[Tue May 14 00:49:15 2013] No arf file for this source, not re-computing flux
[Tue May 14 00:49:19 2013] Flag c found in src. 4 procflags, skipping spectral fitting
[Tue May 14 00:49:19 2013] Source 4 has no response, skipping
[Tue May 14 00:49:20 2013] xmm0112260401/analysis//spectral/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete