[Tue May 14 00:45:19 2013] Detection parameters:
  Position = (475.2, 207.1) = 2 59 3.50 13 39 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.7 +/- 9.4
  Background counts = 7.8
  Rate = 0.003 +/- 0.0008

[Tue May 14 00:45:21 2013] Off-axis axis estimate = 14.43'
[Tue May 14 00:45:48 2013] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:45:48 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 14 00:45:48 2013] Initial guess for spatial extent in simple fitting = 13.64"
[Tue May 14 00:45:48 2013] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.059
[Tue May 14 00:45:48 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 13.64"
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src10.ximg exists
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May 14 00:45:48 2013] Fit fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src10 appears to have run properly
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May 14 00:45:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May 14 00:45:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 14 00:45:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:07 2013] Warning, spatial fit 10 centroid is now closest to src. 1
[Tue May 14 00:46:07 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:07 2013] Assessing source extent using major
[Tue May 14 00:46:07 2013] Source does appear to be extended
[Tue May 14 00:46:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:46:22 2013] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:46:22 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 14 00:46:22 2013] Initial guess for spatial extent in simple fitting = 13.64"
[Tue May 14 00:46:22 2013] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.059
[Tue May 14 00:46:22 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 13.64"
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src10.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src10.csv
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src10.csv
[Tue May 14 00:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue May 14 00:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:39 2013] Spatial fit model total counts = 370.750000, observed total counts = 334.000000
[Tue May 14 00:46:39 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 00:46:39 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:39 2013] Assessing source extent using major
[Tue May 14 00:46:39 2013] Source does appear to be extended
[Tue May 14 00:46:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:47:10 2013] XMMSAS src. selection expression = ellipse(41296.524231, 17965.825989, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 00:47:10 2013] Not overwriting source region fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_src.reg
[Tue May 14 00:47:10 2013] Extracting stamp from image fullrun_mos2_xmm0112260401_pi300-10000_cl_sm2.00.img.gz, (438, 170) - (513, 245)
[Tue May 14 00:47:10 2013] XMMSAS bgd. selection expression = annulus(41296.524231, 17965.825989, 1087.500000, 2175.000000, X, Y) && !ellipse(40783.315033, 18646.064407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40713.848846, 17053.507477, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 00:47:10 2013] Writing fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2.gif
[Tue May 14 00:47:11 2013] ../../xmm0112260401/products/events/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0112260401/products/events/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue May 14 00:47:11 2013] Mean detx,y = (-15727.85, -5312.07) 
[Tue May 14 00:47:11 2013] ../../xmm0112260401/products/images/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_src.img and ../../xmm0112260401/products/images/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue May 14 00:47:11 2013] ../../xmm0112260401/products/spectra/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_src.pi and ../../xmm0112260401/products/spectra/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue May 14 00:47:11 2013] Setting source spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue May 14 00:47:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue May 14 00:47:11 2013] ../../xmm0112260401/products/lightcurves/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0112260401/products/lightcurves/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue May 14 00:48:26 2013] Not generating rmf since there are only 41 counts
[Tue May 14 00:48:26 2013] rmf not generated due to insufficient counts
[Tue May 14 00:49:13 2013] Updating aperture counts using extracted products
[Tue May 14 00:49:13 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_src.pi.gz = 158.00
[Tue May 14 00:49:13 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 321.00
[Tue May 14 00:49:13 2013] Got source and background scale factors 1299606.000000, 3978731.000000
[Tue May 14 00:49:13 2013] User source parameters:
  Position = (475.2, 207.1) = 2 59 3.50 13 39 10.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 53.1 +/- 13.6
  Background aperture counts = 104.9
  Rate = 0.004 +/- 0.001

[Tue May 14 00:49:13 2013] Updating counts from extracted products
[Tue May 14 00:49:13 2013] Set source signif. to 53.15/10.24 = 5.19
[Tue May 14 00:49:15 2013] No arf file for this source, not re-computing flux
[Tue May 14 00:49:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 00:49:20 2013] xmm0112260401/analysis//spectral/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete