[Tue May 14 00:45:21 2013] Detection parameters:
  Position = (248.6, 165.0) = 3 0 11.12 13 36 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.8 +/- 8.4
  Background counts = 3.3
  Rate = 0.003 +/- 0.0007

[Tue May 14 00:45:21 2013] Off-axis axis estimate = 10.32'
[Tue May 14 00:45:48 2013] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:45:48 2013] Initial guess for spatial extent in simple fitting = 11.59"
[Tue May 14 00:45:48 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.049
[Tue May 14 00:45:48 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 11.59"
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src9.ximg exists
[Tue May 14 00:45:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src9.csv
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue May 14 00:45:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src9.csv
[Tue May 14 00:45:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue May 14 00:45:49 2013] Fit fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue May 14 00:46:07 2013] Spatial fit model total counts = 65.991900, observed total counts = 66.000000
[Tue May 14 00:46:07 2013] Offset between fit and detection position for source 16 = 0.147288 pixels
[Tue May 14 00:46:07 2013] 65.677800 total counts/ 36.717800 bgd. counts: snr = 4.779255
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.147288 pixels
  Position = (248.7, 165.1) = 3 0 11.09 13 36 9.8
  Extent = 5.7 (4.1-8.0)", rotation angle = 0
  Source counts = 29.0 +/- 8.1
  Background counts = 36.7
  Rate = 0.002 +/- 0.0007
[Tue May 14 00:46:07 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:07 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:46:07 2013] Source does appear to be extended
[Tue May 14 00:46:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:46:22 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 00:46:22 2013] Initial guess for spatial extent in simple fitting = 5.71"
[Tue May 14 00:46:22 2013] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.218
[Tue May 14 00:46:22 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 5.71"
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src9.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src9.csv
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src9.csv
[Tue May 14 00:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue May 14 00:46:23 2013] Fit fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue May 14 00:46:39 2013] Spatial fit model total counts = 65.993000, observed total counts = 66.000000
[Tue May 14 00:46:39 2013] Offset between fit and detection position for source 16 = 0.000160 pixels
[Tue May 14 00:46:39 2013] 65.678900 total counts/ 36.720800 bgd. counts: snr = 4.778747
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.000160 pixels
  Position = (248.7, 165.1) = 3 0 11.09 13 36 9.8
  Extent = 5.7 (4.1-8.0)", rotation angle = 0
  Source counts = 29.0 +/- 8.1
  Background counts = 36.7
  Rate = 0.002 +/- 0.0007
[Tue May 14 00:46:39 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:39 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:46:39 2013] Source does appear to be extended
[Tue May 14 00:46:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:47:10 2013] XMMSAS src. selection expression = ellipse(21591.457600, 14318.504000, 342.351010, 342.351010, 0.000000, X, Y)
[Tue May 14 00:47:10 2013] Not overwriting source region fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_src.reg
[Tue May 14 00:47:10 2013] Extracting stamp from image fullrun_mos2_xmm0112260401_pi300-10000_cl_sm2.00.img.gz, (229, 145) - (268, 185)
[Tue May 14 00:47:10 2013] XMMSAS bgd. selection expression = annulus(21591.457600, 14318.504000, 570.585016, 1141.170033, X, Y)
[Tue May 14 00:47:10 2013] Writing fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16.gif
[Tue May 14 00:47:11 2013] ../../xmm0112260401/products/events/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0112260401/products/events/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Tue May 14 00:47:11 2013] Mean detx,y = (2391.03, -13945.05) 
[Tue May 14 00:47:11 2013] ../../xmm0112260401/products/images/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_src.img and ../../xmm0112260401/products/images/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Tue May 14 00:47:11 2013] ../../xmm0112260401/products/spectra/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_src.pi and ../../xmm0112260401/products/spectra/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Tue May 14 00:47:11 2013] Setting source spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_src.pi.gz
[Tue May 14 00:47:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue May 14 00:47:11 2013] ../../xmm0112260401/products/lightcurves/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0112260401/products/lightcurves/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Tue May 14 00:48:26 2013] Not generating rmf since there are only 28 counts
[Tue May 14 00:48:26 2013] rmf not generated due to insufficient counts
[Tue May 14 00:49:13 2013] Updating aperture counts using extracted products
[Tue May 14 00:49:13 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_src.pi.gz = 37.00
[Tue May 14 00:49:13 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_bgd.pi.gz = 49.00
[Tue May 14 00:49:13 2013] Got source and background scale factors 369600.000000, 2864848.000000
[Tue May 14 00:49:13 2013] User source parameters:
  Position = (248.7, 165.1) = 3 0 11.09 13 36 9.8
  Extent = 5.7 (4.1-8.0)", rotation angle = 0
  Source aperture counts = 30.7 +/- 7.1
  Background aperture counts = 6.3
  Rate = 0.003 +/- 0.0006

[Tue May 14 00:49:15 2013] No arf file for this source, not re-computing flux
[Tue May 14 00:49:19 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 14 00:49:20 2013] xmm0112260401/analysis//spectral/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete