[Tue May 14 00:45:20 2013] Detection parameters:
  Position = (157.4, 249.3) = 3 0 38.36 13 42 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.8 +/- 6.6
  Background counts = 2.7
  Rate = 0.002 +/- 0.0005

[Tue May 14 00:45:21 2013] Off-axis axis estimate = 10.83'
[Tue May 14 00:45:48 2013] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:45:48 2013] Initial guess for spatial extent in simple fitting = 11.84"
[Tue May 14 00:45:48 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.011
[Tue May 14 00:45:48 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 11.84"
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src15.ximg exists
[Tue May 14 00:45:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src15.csv
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue May 14 00:45:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src15.csv
[Tue May 14 00:45:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue May 14 00:45:49 2013] Fit fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue May 14 00:46:07 2013] Spatial fit model total counts = 45.229700, observed total counts = 44.000000
[Tue May 14 00:46:07 2013] Offset between fit and detection position for source 13 = 0.550847 pixels
[Tue May 14 00:46:07 2013] 45.143100 total counts/ 26.855000 bgd. counts: snr = 3.529035
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.550847 pixels
  Position = (157.9, 249.3) = 3 0 38.20 13 42 15.8
  Extent = 5.1 (3.8-7.4)", rotation angle = 0
  Source counts = 18.3 +/- 6.7
  Background counts = 26.9
  Rate = 0.002 +/- 0.0006
[Tue May 14 00:46:07 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:07 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:46:07 2013] Source does appear to be extended
[Tue May 14 00:46:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:46:22 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 00:46:22 2013] Initial guess for spatial extent in simple fitting = 5.09"
[Tue May 14 00:46:22 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.074
[Tue May 14 00:46:22 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 5.09"
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src15.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src15.csv
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src15.csv
[Tue May 14 00:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue May 14 00:46:23 2013] Fit fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue May 14 00:46:39 2013] Spatial fit model total counts = 42.971600, observed total counts = 42.000000
[Tue May 14 00:46:39 2013] Offset between fit and detection position for source 13 = 0.044103 pixels
[Tue May 14 00:46:39 2013] 42.439300 total counts/ 24.175300 bgd. counts: snr = 3.714582
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.044103 pixels
  Position = (157.9, 249.3) = 3 0 38.21 13 42 15.9
  Extent = 5.1 (3.9-8.0)", rotation angle = 0
  Source counts = 18.3 +/- 6.5
  Background counts = 24.2
  Rate = 0.002 +/- 0.0005
[Tue May 14 00:46:39 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:39 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:46:39 2013] Source does appear to be extended
[Tue May 14 00:46:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:47:10 2013] XMMSAS src. selection expression = ellipse(13689.798860, 21644.168800, 308.619135, 308.619135, 0.000000, X, Y)
[Tue May 14 00:47:10 2013] Not overwriting source region fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src13_src.reg
[Tue May 14 00:47:10 2013] Extracting stamp from image fullrun_mos2_xmm0112260401_pi300-10000_cl_sm2.00.img.gz, (140, 232) - (176, 267)
[Tue May 14 00:47:10 2013] XMMSAS bgd. selection expression = annulus(13689.798860, 21644.168800, 514.365225, 1028.730449, X, Y)
[Tue May 14 00:47:10 2013] Writing fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src13.gif
[Tue May 14 00:47:31 2013] Mean detx,y = (11886.62, -8921.71) 
[Tue May 14 00:47:34 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 00:47:44 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 00:47:44 2013] Setting source spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue May 14 00:47:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue May 14 00:48:33 2013] Not generating rmf since there are only 18 counts
[Tue May 14 00:48:33 2013] rmf not generated due to insufficient counts
[Tue May 14 00:49:15 2013] Updating aperture counts using extracted products
[Tue May 14 00:49:15 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 21.00
[Tue May 14 00:49:15 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src13_bgd.pi.gz = 33.00
[Tue May 14 00:49:15 2013] Got source and background scale factors 296000.000000, 2483940.000000
[Tue May 14 00:49:15 2013] User source parameters:
  Position = (157.9, 249.3) = 3 0 38.21 13 42 15.9
  Extent = 5.1 (3.9-8.0)", rotation angle = 0
  Source aperture counts = 17.1 +/- 5.7
  Background aperture counts = 3.9
  Rate = 0.001 +/- 0.0005

[Tue May 14 00:49:15 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 00:49:15 2013] Using photon index=1.80, rate=0.00152, arf fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src13.arf
[Tue May 14 00:49:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 00:49:15 2013] Updating source flux to 6.3e-14
[Tue May 14 00:49:19 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 14 00:49:20 2013] xmm0112260401/analysis//spectral/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete