[Tue May 14 00:45:20 2013] Detection parameters:
  Position = (341.4, 309.0) = 2 59 43.44 13 46 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.1 +/- 7.4
  Background counts = 4.4
  Rate = 0.003 +/- 0.0006

[Tue May 14 00:45:21 2013] Off-axis axis estimate = 3.20'
[Tue May 14 00:45:48 2013] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:45:48 2013] Initial guess for spatial extent in simple fitting = 8.03"
[Tue May 14 00:45:48 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908
[Tue May 14 00:45:48 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 8.03"
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src14.ximg exists
[Tue May 14 00:45:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src14.csv
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue May 14 00:45:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src14.csv
[Tue May 14 00:45:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue May 14 00:45:49 2013] Fit fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Tue May 14 00:46:07 2013] Spatial fit model total counts = 56.840200, observed total counts = 56.000000
[Tue May 14 00:46:07 2013] Offset between fit and detection position for source 11 = 0.209959 pixels
[Tue May 14 00:46:07 2013] 57.256600 total counts/ 36.587500 bgd. counts: snr = 3.417080
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.209959 pixels
  Position = (341.6, 309.0) = 2 59 43.38 13 46 35.5
  Extent = 4.9 (2.9-6.9)", rotation angle = 0
  Source counts = 20.7 +/- 7.6
  Background counts = 36.6
  Rate = 0.002 +/- 0.0006
[Tue May 14 00:46:07 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:07 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:46:07 2013] Source does appear to be extended
[Tue May 14 00:46:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:46:22 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 00:46:22 2013] Initial guess for spatial extent in simple fitting = 4.88"
[Tue May 14 00:46:22 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.141
[Tue May 14 00:46:22 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 4.88"
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src14.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src14.csv
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src14.csv
[Tue May 14 00:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue May 14 00:46:23 2013] Fit fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Tue May 14 00:46:39 2013] Spatial fit model total counts = 56.840200, observed total counts = 56.000000
[Tue May 14 00:46:39 2013] Offset between fit and detection position for source 11 = 0.000002 pixels
[Tue May 14 00:46:39 2013] 57.256600 total counts/ 36.587500 bgd. counts: snr = 3.417080
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.000002 pixels
  Position = (341.6, 309.0) = 2 59 43.38 13 46 35.5
  Extent = 4.9 (2.9-6.9)", rotation angle = 0
  Source counts = 20.7 +/- 7.6
  Background counts = 36.6
  Rate = 0.002 +/- 0.0006
[Tue May 14 00:46:39 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:39 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:46:39 2013] Source does appear to be extended
[Tue May 14 00:46:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:47:10 2013] XMMSAS src. selection expression = ellipse(29667.853400, 26832.479000, 292.648420, 292.648420, 0.000000, X, Y)
[Tue May 14 00:47:10 2013] Not overwriting source region fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src11_src.reg
[Tue May 14 00:47:10 2013] Extracting stamp from image fullrun_mos2_xmm0112260401_pi300-10000_cl_sm2.00.img.gz, (325, 292) - (358, 326)
[Tue May 14 00:47:10 2013] XMMSAS bgd. selection expression = annulus(29667.853400, 26832.479000, 487.747366, 975.494733, X, Y)
[Tue May 14 00:47:10 2013] Writing fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src11.gif
[Tue May 14 00:47:16 2013] Mean detx,y = (-2218.96, 251.12) 
[Tue May 14 00:47:18 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 00:47:26 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 00:47:27 2013] Setting source spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue May 14 00:47:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue May 14 00:48:26 2013] Not generating rmf since there are only 20 counts
[Tue May 14 00:48:26 2013] rmf not generated due to insufficient counts
[Tue May 14 00:49:14 2013] Updating aperture counts using extracted products
[Tue May 14 00:49:14 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 26.00
[Tue May 14 00:49:14 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src11_bgd.pi.gz = 42.00
[Tue May 14 00:49:14 2013] Got source and background scale factors 270400.000000, 2232996.000000
[Tue May 14 00:49:14 2013] User source parameters:
  Position = (341.6, 309.0) = 2 59 43.38 13 46 35.5
  Extent = 4.9 (2.9-6.9)", rotation angle = 0
  Source aperture counts = 20.9 +/- 6.2
  Background aperture counts = 5.1
  Rate = 0.002 +/- 0.0005

[Tue May 14 00:49:15 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 00:49:15 2013] Using photon index=1.80, rate=0.00172, arf fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src11.arf
[Tue May 14 00:49:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 00:49:15 2013] Updating source flux to 2.2e-14
[Tue May 14 00:49:19 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 14 00:49:20 2013] xmm0112260401/analysis//spectral/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete