[Tue May 14 00:45:20 2013] Detection parameters:
  Position = (213.8, 369.9) = 3 0 21.55 13 51 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.3 +/- 7.6
  Background counts = 2.8
  Rate = 0.006 +/- 0.001

[Tue May 14 00:45:21 2013] Off-axis axis estimate = 8.03'
[Tue May 14 00:45:48 2013] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:45:48 2013] Initial guess for spatial extent in simple fitting = 10.44"
[Tue May 14 00:45:48 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.069
[Tue May 14 00:45:48 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.44"
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src5.ximg exists
[Tue May 14 00:45:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src5.csv
[Tue May 14 00:45:48 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May 14 00:45:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src5.csv
[Tue May 14 00:45:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May 14 00:45:49 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May 14 00:45:49 2013] Fit fullrun_mos2_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue May 14 00:46:07 2013] Spatial fit model total counts = 49.624100, observed total counts = 50.000000
[Tue May 14 00:46:07 2013] Offset between fit and detection position for source 10 = 0.322728 pixels
[Tue May 14 00:46:07 2013] 48.346000 total counts/ 18.156000 bgd. counts: snr = 7.085215
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.322728 pixels
  Position = (213.5, 369.7) = 3 0 21.63 13 50 59.8
  Extent = 7.2 (5.3-10.4)", rotation angle = 0
  Source counts = 30.2 +/- 7.0
  Background counts = 18.2
  Rate = 0.003 +/- 0.0006
[Tue May 14 00:46:07 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:07 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:46:07 2013] Source does appear to be extended
[Tue May 14 00:46:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:46:22 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 00:46:22 2013] Initial guess for spatial extent in simple fitting = 7.16"
[Tue May 14 00:46:22 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.085
[Tue May 14 00:46:22 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 7.16"
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src5.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src5.csv
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue May 14 00:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src5.csv
[Tue May 14 00:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue May 14 00:46:23 2013] fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue May 14 00:46:23 2013] Fit fullrun_mos2_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue May 14 00:46:39 2013] Spatial fit model total counts = 47.295000, observed total counts = 48.000000
[Tue May 14 00:46:39 2013] Offset between fit and detection position for source 10 = 0.115118 pixels
[Tue May 14 00:46:39 2013] 45.555900 total counts/ 13.011700 bgd. counts: snr = 9.022078
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.115118 pixels
  Position = (213.5, 369.8) = 3 0 21.63 13 51 0.3
  Extent = 7.7 (5.8-10.7)", rotation angle = 0
  Source counts = 32.5 +/- 6.7
  Background counts = 13.0
  Rate = 0.003 +/- 0.0006
[Tue May 14 00:46:39 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:39 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:46:39 2013] Source does appear to be extended
[Tue May 14 00:46:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:47:10 2013] XMMSAS src. selection expression = ellipse(18526.772000, 32128.294300, 459.697330, 459.697330, 0.000000, X, Y)
[Tue May 14 00:47:10 2013] Not overwriting source region fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_src.reg
[Tue May 14 00:47:10 2013] Extracting stamp from image fullrun_mos2_xmm0112260401_pi300-10000_cl_sm2.00.img.gz, (187, 343) - (240, 396)
[Tue May 14 00:47:10 2013] XMMSAS bgd. selection expression = annulus(18526.772000, 32128.294300, 766.162216, 1532.324433, X, Y)
[Tue May 14 00:47:10 2013] Writing fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10.gif
[Tue May 14 00:47:10 2013] ../../xmm0112260401/products/events/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0112260401/products/events/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue May 14 00:47:10 2013] Mean detx,y = (9963.42, 2451.89) 
[Tue May 14 00:47:10 2013] ../../xmm0112260401/products/images/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_src.img and ../../xmm0112260401/products/images/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue May 14 00:47:10 2013] ../../xmm0112260401/products/spectra/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_src.pi and ../../xmm0112260401/products/spectra/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue May 14 00:47:10 2013] Setting source spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_src.pi.gz
[Tue May 14 00:47:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue May 14 00:47:10 2013] ../../xmm0112260401/products/lightcurves/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0112260401/products/lightcurves/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue May 14 00:48:25 2013] Not generating rmf since there are only 32 counts
[Tue May 14 00:48:25 2013] rmf not generated due to insufficient counts
[Tue May 14 00:49:11 2013] Updating aperture counts using extracted products
[Tue May 14 00:49:11 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_src.pi.gz = 38.00
[Tue May 14 00:49:11 2013] Total counts from fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_bgd.pi.gz = 91.00
[Tue May 14 00:49:11 2013] Got source and background scale factors 656000.000000, 5361128.000000
[Tue May 14 00:49:11 2013] User source parameters:
  Position = (213.5, 369.8) = 3 0 21.63 13 51 0.3
  Extent = 7.7 (5.8-10.7)", rotation angle = 0
  Source aperture counts = 26.9 +/- 7.2
  Background aperture counts = 11.1
  Rate = 0.002 +/- 0.0006

[Tue May 14 00:49:15 2013] No arf file for this source, not re-computing flux
[Tue May 14 00:49:19 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 14 00:49:20 2013] xmm0112260401/analysis//spectral/fullrun_mos2_xmm0112260401_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete