[Tue May 14 00:45:17 2013] Detection parameters:
  Position = (353.8, 430.1) = 2 59 39.73 13 55 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.6 +/- 9.8
  Background counts = 3.5
  Rate = 0.009 +/- 0.002

[Tue May 14 00:45:19 2013] Off-axis axis estimate = 10.36'
[Tue May 14 00:45:46 2013] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:45:46 2013] Initial guess for spatial extent in simple fitting = 11.61"
[Tue May 14 00:45:46 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.897
[Tue May 14 00:45:46 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.61"
[Tue May 14 00:45:47 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_src3.ximg exists
[Tue May 14 00:45:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_src3.csv
[Tue May 14 00:45:47 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May 14 00:45:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_src3.csv
[Tue May 14 00:45:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:45:47 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May 14 00:45:47 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May 14 00:45:47 2013] Fit fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue May 14 00:46:02 2013] Warning, spatial fit 3 centroid is now closest to src. 2
[Tue May 14 00:46:02 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:02 2013] Assessing source extent using major
[Tue May 14 00:46:02 2013] Source does appear to be extended
[Tue May 14 00:46:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:46:21 2013] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:46:21 2013] Initial guess for spatial extent in simple fitting = 11.61"
[Tue May 14 00:46:21 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.897
[Tue May 14 00:46:21 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 11.61"
[Tue May 14 00:46:22 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 14 00:46:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_src3.csv
[Tue May 14 00:46:22 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 14 00:46:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_src3.csv
[Tue May 14 00:46:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:22 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 14 00:46:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue May 14 00:46:22 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 14 00:46:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue May 14 00:46:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:46:34 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.902854 pixels away
[Tue May 14 00:46:34 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:46:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:46:34 2013] Assessing source extent using major
[Tue May 14 00:46:34 2013] Source does appear to be extended
[Tue May 14 00:46:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 00:47:01 2013] XMMSAS src. selection expression = ellipse(30729.828888, 37371.846649, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 00:47:01 2013] Not overwriting source region fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_src.reg
[Tue May 14 00:47:01 2013] Extracting stamp from image fullrun_mos1_xmm0112260401_pi300-10000_cl_sm2.00.img.gz, (316, 393) - (391, 468)
[Tue May 14 00:47:01 2013] XMMSAS bgd. selection expression = annulus(30729.828888, 37371.846649, 1087.500000, 2175.000000, X, Y) && !ellipse(31157.965400, 36855.997600, 445.659213, 445.659213, 0.000000, X, Y) && !ellipse(31963.177880, 38755.776200, 700.228020, 277.400808, 25.808400, X, Y) && !ellipse(32735.805400, 39610.024660, 281.044808, 281.044808, 0.000000, X, Y)
[Tue May 14 00:47:01 2013] Writing fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3.gif
[Tue May 14 00:47:02 2013] ../../xmm0112260401/products/events/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0112260401/products/events/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue May 14 00:47:02 2013] Mean detx,y = (10734.89, 592.93) 
[Tue May 14 00:47:02 2013] ../../xmm0112260401/products/images/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_src.img and ../../xmm0112260401/products/images/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue May 14 00:47:02 2013] ../../xmm0112260401/products/spectra/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_src.pi and ../../xmm0112260401/products/spectra/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue May 14 00:47:02 2013] Setting source spectrum file to fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_src.pi.gz
[Tue May 14 00:47:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May 14 00:47:02 2013] ../../xmm0112260401/products/lightcurves/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0112260401/products/lightcurves/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue May 14 00:47:08 2013] Not generating rmf since there are only 57 counts
[Tue May 14 00:47:08 2013] rmf not generated due to insufficient counts
[Tue May 14 00:49:06 2013] Updating aperture counts using extracted products
[Tue May 14 00:49:06 2013] Total counts from fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_src.pi.gz = 148.00
[Tue May 14 00:49:06 2013] Total counts from fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 203.00
[Tue May 14 00:49:06 2013] Got source and background scale factors 1345600.000000, 10546536.000000
[Tue May 14 00:49:06 2013] User source parameters:
  Position = (353.8, 430.1) = 2 59 39.73 13 55 24.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 122.1 +/- 13.2
  Background aperture counts = 25.9
  Rate = 0.01 +/- 0.001

[Tue May 14 00:49:06 2013] Updating counts from extracted products
[Tue May 14 00:49:06 2013] Set source signif. to 122.10/5.09 = 23.99
[Tue May 14 00:49:09 2013] No arf file for this source, not re-computing flux
[Tue May 14 00:49:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 00:49:19 2013] xmm0112260401/analysis//spectral/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete