[Tue May 14 00:45:17 2013] Detection parameters: Position = (359.1, 424.1) = 2 59 38.12 13 54 57.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 212.0 +/- 17.7 Background counts = 3.4 Rate = 0.03 +/- 0.003 [Tue May 14 00:45:19 2013] Off-axis axis estimate = 10.12' [Tue May 14 00:45:46 2013] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting [Tue May 14 00:45:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue May 14 00:45:46 2013] Initial guess for spatial extent in simple fitting = 11.49" [Tue May 14 00:45:46 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.912 [Tue May 14 00:45:46 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.49" [Tue May 14 00:45:47 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_src1.ximg exists [Tue May 14 00:45:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_src1.csv [Tue May 14 00:45:47 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_src1_1.ximg exists [Tue May 14 00:45:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_src1.csv [Tue May 14 00:45:47 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 14 00:45:47 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Tue May 14 00:45:47 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Tue May 14 00:45:47 2013] Fit fullrun_mos1_xmm0112260401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Tue May 14 00:46:02 2013] Warning, spatial fit 1 centroid is now closest to src. 5 [Tue May 14 00:46:02 2013] Spatial fit model total counts = 222.838000, observed total counts = 225.000000 [Tue May 14 00:46:02 2013] Offset between fit and detection position for source 2 = 0.516740 pixels [Tue May 14 00:46:02 2013] Warning, changing simple spatial fit ID from 1 to 3 [Tue May 14 00:46:02 2013] 222.822000 total counts/ 117.873000 bgd. counts: snr = 9.666542 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.516740 pixels Position = (358.7, 424.4) = 2 59 38.26 13 54 57.4 Extent = 4.4 (3.4-5.3)", rotation angle = 0 Source counts = 104.9 +/- 14.9 Background counts = 117.9 Rate = 0.009 +/- 0.001 [Tue May 14 00:46:02 2013] Vigneting correction estimate = 1.000000 [Tue May 14 00:46:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 14 00:46:02 2013] Assessing source extent using major axis lower bound [Tue May 14 00:46:02 2013] Source does appear to be extended [Tue May 14 00:46:02 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 14 00:46:21 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Tue May 14 00:46:21 2013] Initial guess for spatial extent in simple fitting = 4.38" [Tue May 14 00:46:21 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.990 [Tue May 14 00:46:21 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 4.38" [Tue May 14 00:46:22 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_src1.ximg exists [Tue May 14 00:46:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_src1.csv [Tue May 14 00:46:22 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_src1_1.ximg exists [Tue May 14 00:46:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_src1.csv [Tue May 14 00:46:22 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 14 00:46:22 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Tue May 14 00:46:22 2013] fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Tue May 14 00:46:22 2013] Fit fullrun_mos1_xmm0112260401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Tue May 14 00:46:34 2013] Spatial fit model total counts = 280.327000, observed total counts = 280.000000 [Tue May 14 00:46:34 2013] Offset between fit and detection position for source 2 = 0.169484 pixels [Tue May 14 00:46:34 2013] 283.399000 total counts/ 144.828000 bgd. counts: snr = 11.514527 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.169484 pixels Position = (358.7, 424.2) = 2 59 38.26 13 54 56.7 Extent = 5.6 (4.3-6.4)", rotation angle = 0 Source counts = 138.6 +/- 16.8 Background counts = 144.8 Rate = 0.01 +/- 0.001 [Tue May 14 00:46:34 2013] Vigneting correction estimate = 1.000000 [Tue May 14 00:46:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 14 00:46:34 2013] Assessing source extent using major axis lower bound [Tue May 14 00:46:34 2013] Source does appear to be extended [Tue May 14 00:46:34 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 14 00:47:01 2013] XMMSAS src. selection expression = ellipse(31157.965400, 36855.997600, 334.244410, 334.244410, 0.000000, X, Y) [Tue May 14 00:47:01 2013] Not overwriting source region fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_src.reg [Tue May 14 00:47:01 2013] Extracting stamp from image fullrun_mos1_xmm0112260401_pi300-10000_cl_sm2.00.img.gz, (339, 405) - (378, 443) [Tue May 14 00:47:01 2013] XMMSAS bgd. selection expression = annulus(31157.965400, 36855.997600, 557.074016, 1114.148032, X, Y) && !ellipse(30729.828888, 37371.846649, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 14 00:47:01 2013] Writing fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2.gif [Tue May 14 00:47:02 2013] ../../xmm0112260401/products/events/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0112260401/products/events/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create [Tue May 14 00:47:02 2013] Mean detx,y = (10506.62, 920.48) [Tue May 14 00:47:02 2013] ../../xmm0112260401/products/images/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_src.img and ../../xmm0112260401/products/images/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create [Tue May 14 00:47:02 2013] ../../xmm0112260401/products/spectra/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_src.pi and ../../xmm0112260401/products/spectra/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create [Tue May 14 00:47:02 2013] Setting source spectrum file to fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_src.pi.gz [Tue May 14 00:47:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_bgd.pi.gz [Tue May 14 00:47:02 2013] ../../xmm0112260401/products/lightcurves/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0112260401/products/lightcurves/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create [Tue May 14 00:49:06 2013] Updating aperture counts using extracted products [Tue May 14 00:49:06 2013] Total counts from fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_src.pi.gz = 166.00 [Tue May 14 00:49:06 2013] Total counts from fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 56.00 [Tue May 14 00:49:06 2013] Got source and background scale factors 317300.000000, 1765476.000000 [Tue May 14 00:49:06 2013] User source parameters: Position = (358.7, 424.2) = 2 59 38.26 13 54 56.7 Extent = 5.6 (4.3-6.4)", rotation angle = 0 Source aperture counts = 155.9 +/- 13.9 Background aperture counts = 10.1 Rate = 0.01 +/- 0.001 [Tue May 14 00:49:09 2013] No arf file for this source, not re-computing flux [Tue May 14 00:49:18 2013] Source 2 has no response, skipping [Tue May 14 00:49:19 2013] xmm0112260401/analysis//spectral/fullrun_mos1_xmm0112260401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete