[Wed Jun 5 12:38:26 2013] Detection parameters: Position = (313.4, 278.8) = 2 57 43.31 13 1 43.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 83.5 +/- 19.1 Background counts = 146.2 Rate = 0.01 +/- 0.002 [Wed Jun 5 12:38:27 2013] Off-axis axis estimate = 1.79' [Wed Jun 5 12:40:46 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 12:40:46 2013] Initial guess for spatial extent in simple fitting = 7.32" [Wed Jun 5 12:40:46 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.049 [Wed Jun 5 12:40:46 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 7.32" [Wed Jun 5 15:49:10 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src50.ximg exists [Wed Jun 5 15:49:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src50.csv [Wed Jun 5 15:49:10 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src50_1.ximg exists [Wed Jun 5 15:49:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src50.csv [Wed Jun 5 15:49:10 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src50_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 15:49:12 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists [Wed Jun 5 15:49:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src50.csv [Wed Jun 5 15:49:12 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists [Wed Jun 5 15:49:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src50.csv [Wed Jun 5 15:49:12 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 21:15:05 2013] Source 51 is offset by 7.166369 and -6.054371 pixels which is larger than 2 X fitted extent = 0.868287 x 0.868287, not incorporating fit results [Wed Jun 5 21:15:05 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 21:15:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 21:15:05 2013] Assessing source extent using major [Wed Jun 5 21:15:05 2013] Source does appear to be extended [Wed Jun 5 21:15:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 21:15:34 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 21:15:34 2013] Initial guess for spatial extent in simple fitting = 7.32" [Wed Jun 5 21:15:34 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.049 [Wed Jun 5 21:15:34 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 7.32" [Wed Jun 5 23:12:47 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src35.ximg exists [Wed Jun 5 23:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src35.csv [Wed Jun 5 23:12:47 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src35_1.ximg exists [Wed Jun 5 23:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src35.csv [Wed Jun 5 23:12:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src35_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 23:12:48 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists [Wed Jun 5 23:12:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src35.csv [Wed Jun 5 23:12:48 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists [Wed Jun 5 23:12:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src35.csv [Wed Jun 5 23:12:48 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 03:24:45 2013] Source 51 is offset by -2.882343 and -3.864601 pixels which is larger than 2 X fitted extent = 2.334520 x 0.841812, not incorporating fit results [Thu Jun 6 03:24:45 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 03:24:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 03:24:45 2013] Assessing source extent using major [Thu Jun 6 03:24:45 2013] Source does appear to be extended [Thu Jun 6 03:24:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 03:25:08 2013] XMMSAS src. selection expression = ellipse(27220.188141, 24208.585754, 652.500000, 652.500000, 0.000000, X, Y) [Thu Jun 6 03:25:08 2013] Writing source region out to fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src51_src.reg [Thu Jun 6 03:25:08 2013] Extracting stamp from image fullrun_pn_xmm0112260101_pi300-10000_cl_sm2.00.img.gz, (276, 241) - (351, 316) [Thu Jun 6 03:25:08 2013] XMMSAS bgd. selection expression = annulus(27220.188141, 24208.585754, 1087.500000, 2175.000000, X, Y) && !ellipse(24222.976013, 24312.323059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24262.751007, 25259.621582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24704.228000, 25075.798000, 1064.288031, 1064.288031, 0.000000, X, Y) && !ellipse(25198.290405, 24235.842285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28618.000000, 25814.522705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.511627, 25958.664246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25192.882111, 25530.543427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24226.570923, 26737.578156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24649.009979, 26743.023621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25288.521576, 26228.595764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26810.453400, 25778.940002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.168640, 25701.312256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.912170, 25792.257629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24336.061676, 22522.517365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26317.456940, 26519.329437, 870.000000, 870.000000, 0.000000, X, Y) [Thu Jun 6 03:25:08 2013] Writing fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src51.gif [Thu Jun 6 03:40:55 2013] Mean detx,y = (-2810.57, 129.33) [Thu Jun 6 03:40:59 2013] Setting backscal keywords in source and bgd. spectrum [Thu Jun 6 03:41:33 2013] Binned source spectrum to 10 counts/bin [Thu Jun 6 03:41:34 2013] Setting source spectrum file to fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src51_src_b10.pi.gz [Thu Jun 6 03:41:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src51_bgd.pi.gz [Thu Jun 6 04:27:40 2013] Not generating rmf since there are only 83 counts [Thu Jun 6 04:27:41 2013] rmf not generated due to insufficient counts [Thu Jun 6 05:45:03 2013] Updating aperture counts using extracted products [Thu Jun 6 05:45:03 2013] Total counts from fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src51_src_b10.pi.gz = 924.00 [Thu Jun 6 05:45:03 2013] Total counts from fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src51_bgd.pi.gz = 2742.00 [Thu Jun 6 05:45:03 2013] Got source and background scale factors 1157300.000000, 4814914.000000 [Thu Jun 6 05:45:03 2013] User source parameters: Position = (313.4, 278.8) = 2 57 43.31 13 1 43.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 264.9 +/- 31.4 Background aperture counts = 659.1 Rate = 0.03 +/- 0.003 [Thu Jun 6 05:45:03 2013] Updating counts from extracted products [Thu Jun 6 05:45:03 2013] Set source signif. to 264.94/25.67 = 10.32 [Thu Jun 6 05:45:04 2013] Calculating source flux in energy range 0.30-8.00 [Thu Jun 6 05:45:04 2013] Using photon index=1.80, rate=0.0287, arf fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src51.arf [Thu Jun 6 05:45:04 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 6 05:45:04 2013] Updating source flux to 1.1e-13 [Thu Jun 6 05:45:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Jun 6 05:45:22 2013] xmm0112260101/analysis//spectral/fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete