[Wed Jun  5 12:38:26 2013] Detection parameters:
  Position = (310.2, 303.9) = 2 57 44.27 13 3 26.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.7 +/- 17.6
  Background counts = 145.6
  Rate = 0.02 +/- 0.003

[Wed Jun  5 12:38:27 2013] Off-axis axis estimate = 0.94'
[Wed Jun  5 12:40:46 2013] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 12:40:46 2013] Initial guess for spatial extent in simple fitting = 6.90"
[Wed Jun  5 12:40:46 2013] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.689
[Wed Jun  5 12:40:46 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 6.90"
[Wed Jun  5 15:49:10 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src32.ximg exists
[Wed Jun  5 15:49:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src32.csv
[Wed Jun  5 15:49:10 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src32_1.ximg exists
[Wed Jun  5 15:49:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src32.csv
[Wed Jun  5 15:49:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 15:49:11 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Wed Jun  5 15:49:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Wed Jun  5 15:49:11 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Wed Jun  5 15:49:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Wed Jun  5 15:49:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 21:15:05 2013] Spatial fit model total counts = 1551.810000, observed total counts = 1279.000000
[Wed Jun  5 21:15:05 2013] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 21:15:05 2013] Spatial fit model total counts = 1838.660000, observed total counts = 1436.000000
[Wed Jun  5 21:15:05 2013] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 21:15:05 2013] Spatial fit model total counts = 2071.030000, observed total counts = 1981.000000
[Wed Jun  5 21:15:05 2013] Offset between fit and detection position for source 33 = 1.805492 pixels
[Wed Jun  5 21:15:05 2013] Warning, changing simple spatial fit ID from 32 to 36
[Wed Jun  5 21:15:05 2013] 2020.977100 total counts/ 1988.570000 bgd. counts: snr = 0.726724
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 1.805492 pixels
  Position = (308.5, 303.4) = 2 57 44.79 13 3 28.1
  Extent = 3.9 (1.6-6.8)", rotation angle = 0
  Source counts = 32.4 +/- 45.0
  Background counts = 1988.6
  Rate = 0.004 +/- 0.005
  Deleting source due to low Poisson probability