[Wed Jun 5 12:38:25 2013] Detection parameters: Position = (273.5, 279.3) = 2 57 55.22 13 1 40.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 466.0 +/- 33.1 Background counts = 170.3 Rate = 0.05 +/- 0.004 [Wed Jun 5 12:38:27 2013] Off-axis axis estimate = 2.28' [Wed Jun 5 12:40:46 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 12:40:46 2013] Initial guess for spatial extent in simple fitting = 7.57" [Wed Jun 5 12:40:46 2013] source mask rpix=1.7, npix_max = 20, mask sum = 19, frac = 0.946 [Wed Jun 5 12:40:46 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.57" [Wed Jun 5 15:49:09 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src2.ximg exists [Wed Jun 5 15:49:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src2.csv [Wed Jun 5 15:49:09 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src2_1.ximg exists [Wed Jun 5 15:49:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src2.csv [Wed Jun 5 15:49:09 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 15:49:10 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Wed Jun 5 15:49:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src2.csv [Wed Jun 5 15:49:10 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Wed Jun 5 15:49:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src2.csv [Wed Jun 5 15:49:10 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 21:15:05 2013] Spatial fit model total counts = 6997.820000, observed total counts = 3013.000000 [Wed Jun 5 21:15:05 2013] Poor agreement between spatial fit and data for source 2 It may help to tweak spatial fit manually Not incorporating fit results [Wed Jun 5 21:15:05 2013] Source 2 is offset by -0.944341 and 2.928882 pixels which is larger than 2 X fitted extent = 0.922768 x 0.922768, not incorporating fit results [Wed Jun 5 21:15:05 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 21:15:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 21:15:05 2013] Assessing source extent using major [Wed Jun 5 21:15:05 2013] Source does appear to be extended [Wed Jun 5 21:15:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 21:15:05 2013] Source is confused with source 1 [Wed Jun 5 21:15:34 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 21:15:34 2013] Initial guess for spatial extent in simple fitting = 7.57" [Wed Jun 5 21:15:34 2013] source mask rpix=1.7, npix_max = 20, mask sum = 19, frac = 0.946 [Wed Jun 5 21:15:34 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.57" [Wed Jun 5 23:12:47 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src2.ximg exists [Wed Jun 5 23:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src2.csv [Wed Jun 5 23:12:47 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src2_1.ximg exists [Wed Jun 5 23:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src2.csv [Wed Jun 5 23:12:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 23:12:47 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Wed Jun 5 23:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src2.csv [Wed Jun 5 23:12:47 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Wed Jun 5 23:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src2.csv [Wed Jun 5 23:12:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 03:24:45 2013] Warning, spatial fit 2 centroid is now closest to src. 7 [Thu Jun 6 03:24:45 2013] Source 2 is offset by -1.193697 and 2.901571 pixels which is larger than 2 X fitted extent = 2.037545 x 2.037545, not incorporating fit results [Thu Jun 6 03:24:45 2013] Source 2 is offset by -1.857352 and -0.627900 pixels which is larger than 2 X fitted extent = 1.736041 x 1.736041, not incorporating fit results [Thu Jun 6 03:24:45 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 03:24:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 03:24:45 2013] Assessing source extent using major [Thu Jun 6 03:24:45 2013] Source does appear to be extended [Thu Jun 6 03:24:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 03:25:07 2013] XMMSAS src. selection expression = ellipse(23741.664337, 24246.852692, 652.500000, 652.500000, 0.000000, X, Y) [Thu Jun 6 03:25:07 2013] Writing source region out to fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src2_src.reg [Thu Jun 6 03:25:07 2013] Extracting stamp from image fullrun_pn_xmm0112260101_pi300-10000_cl_sm2.00.img.gz, (236, 242) - (311, 317) [Thu Jun 6 03:25:07 2013] XMMSAS bgd. selection expression = annulus(23741.664337, 24246.852692, 1087.500000, 2175.000000, X, Y) && !ellipse(24222.976013, 24312.323059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23849.344360, 25087.511963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24262.751007, 25259.621582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24704.228000, 25075.798000, 1064.288031, 1064.288031, 0.000000, X, Y) && !ellipse(23170.562225, 24921.150482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23393.297943, 23485.716858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22760.838000, 25189.033800, 1221.912035, 1221.912035, 0.000000, X, Y) && !ellipse(22896.520721, 24491.038391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25198.290405, 24235.842285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.511627, 25958.664246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22749.917200, 26108.828000, 1227.056035, 1227.056035, 0.000000, X, Y) && !ellipse(23745.992035, 26483.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22736.658752, 26658.083923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25192.882111, 25530.543427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21941.265076, 25610.536804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24226.570923, 26737.578156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24649.009979, 26743.023621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25288.521576, 26228.595764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.168640, 25701.312256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.912170, 25792.257629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21952.047150, 24662.699310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24336.061676, 22522.517365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26317.456940, 26519.329437, 870.000000, 870.000000, 0.000000, X, Y) [Thu Jun 6 03:25:07 2013] Writing fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src2.gif [Thu Jun 6 03:25:38 2013] Mean detx,y = (610.46, -561.68) [Thu Jun 6 03:25:40 2013] Setting backscal keywords in source and bgd. spectrum [Thu Jun 6 03:25:58 2013] Binned source spectrum to 10 counts/bin [Thu Jun 6 03:25:58 2013] Setting source spectrum file to fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Thu Jun 6 03:25:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src2_bgd.pi.gz [Thu Jun 6 03:42:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Jun 6 03:42:32 2013] rmf not generated due to insufficient counts [Thu Jun 6 05:44:57 2013] Updating aperture counts using extracted products [Thu Jun 6 05:44:57 2013] Total counts from fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 2230.00 [Thu Jun 6 05:44:57 2013] Total counts from fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 997.00 [Thu Jun 6 05:44:57 2013] Got source and background scale factors 1087095.000000, 1577512.000000 [Thu Jun 6 05:44:57 2013] User source parameters: Position = (273.5, 279.3) = 2 57 55.22 13 1 40.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1542.9 +/- 48.2 Background aperture counts = 687.1 Rate = 0.2 +/- 0.005 [Thu Jun 6 05:44:57 2013] Updating counts from extracted products [Thu Jun 6 05:44:57 2013] Set source signif. to 1542.95/26.21 = 58.86 [Thu Jun 6 05:45:03 2013] Calculating source flux in energy range 0.30-8.00 [Thu Jun 6 05:45:03 2013] Using photon index=1.80, rate=0.167, arf fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src2.arf [Thu Jun 6 05:45:03 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 6 05:45:03 2013] Updating source flux to 5.3e-13 [Thu Jun 6 05:45:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Jun 6 05:45:22 2013] xmm0112260101/analysis//spectral/fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete