[Wed Jun  5 12:38:26 2013] Detection parameters:
  Position = (276.3, 267.2) = 2 57 54.36 13 0 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193.1 +/- 24.4
  Background counts = 153.6
  Rate = 0.02 +/- 0.003

[Wed Jun  5 12:38:27 2013] Off-axis axis estimate = 2.77'
[Wed Jun  5 12:40:46 2013] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 12:40:46 2013] Initial guess for spatial extent in simple fitting = 7.82"
[Wed Jun  5 12:40:46 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948
[Wed Jun  5 12:40:46 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 7.82"
[Wed Jun  5 15:49:09 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src14.ximg exists
[Wed Jun  5 15:49:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src14.csv
[Wed Jun  5 15:49:09 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Jun  5 15:49:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src14.csv
[Wed Jun  5 15:49:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 15:49:11 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Jun  5 15:49:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed Jun  5 15:49:11 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Jun  5 15:49:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed Jun  5 15:49:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 21:15:05 2013] Spatial fit model total counts = 2276.440000, observed total counts = 1592.000000
[Wed Jun  5 21:15:05 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 21:15:05 2013] Spatial fit model total counts = 1627.130000, observed total counts = 1622.000000
[Wed Jun  5 21:15:05 2013] Offset between fit and detection position for source 14 = 0.266682 pixels
[Wed Jun  5 21:15:05 2013] Warning, changing simple spatial fit ID from 14 to 39
[Wed Jun  5 21:15:05 2013] 1653.853800 total counts/ 1604.250000 bgd. counts: snr = 1.238451
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.266682 pixels
  Position = (276.6, 267.2) = 2 57 54.28 13 0 51.0
  Extent = 8.4 (3.3-16.0)", rotation angle = 0
  Source counts = 49.6 +/- 40.7
  Background counts = 1604.2
  Rate = 0.005 +/- 0.004
  Deleting source due to low Poisson probability