[Wed Jun 5 12:38:25 2013] Detection parameters: Position = (279.0, 280.0) = 2 57 53.57 13 1 45.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 538.9 +/- 36.4 Background counts = 177.2 Rate = 0.06 +/- 0.004 [Wed Jun 5 12:38:27 2013] Off-axis axis estimate = 1.94' [Wed Jun 5 12:40:46 2013] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 12:40:46 2013] Initial guess for spatial extent in simple fitting = 7.40" [Wed Jun 5 12:40:46 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.826 [Wed Jun 5 12:40:46 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.40" [Wed Jun 5 15:49:09 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src1.ximg exists [Wed Jun 5 15:49:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src1.csv [Wed Jun 5 15:49:09 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src1_1.ximg exists [Wed Jun 5 15:49:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src1.csv [Wed Jun 5 15:49:09 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 15:49:10 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed Jun 5 15:49:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src1.csv [Wed Jun 5 15:49:10 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed Jun 5 15:49:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src1.csv [Wed Jun 5 15:49:10 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 21:15:05 2013] Warning, spatial fit 1 centroid is now closest to src. 13 [Wed Jun 5 21:15:05 2013] Source 1 is offset by -3.442919 and -0.541321 pixels which is larger than 2 X fitted extent = 0.993338 x 0.993338, not incorporating fit results [Wed Jun 5 21:15:05 2013] Spatial fit model total counts = 4072.850000, observed total counts = 2888.000000 [Wed Jun 5 21:15:05 2013] Poor agreement between spatial fit and data for source 1 It may help to tweak spatial fit manually Not incorporating fit results [Wed Jun 5 21:15:05 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 21:15:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 21:15:05 2013] Assessing source extent using major [Wed Jun 5 21:15:05 2013] Source does appear to be extended [Wed Jun 5 21:15:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 21:15:05 2013] Source is confused with source 2 [Wed Jun 5 21:15:34 2013] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 21:15:34 2013] Initial guess for spatial extent in simple fitting = 7.40" [Wed Jun 5 21:15:34 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.826 [Wed Jun 5 21:15:34 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.40" [Wed Jun 5 23:12:47 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src1.ximg exists [Wed Jun 5 23:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src1.csv [Wed Jun 5 23:12:47 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src1_1.ximg exists [Wed Jun 5 23:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src1.csv [Wed Jun 5 23:12:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 23:12:47 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Wed Jun 5 23:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src1.csv [Wed Jun 5 23:12:47 2013] fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Wed Jun 5 23:12:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src1.csv [Wed Jun 5 23:12:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 03:24:45 2013] Spatial fit model total counts = 4165.770000, observed total counts = 3504.000000 [Thu Jun 6 03:24:45 2013] Poor agreement between spatial fit and data for source 1 It may help to tweak spatial fit manually Not incorporating fit results [Thu Jun 6 03:24:45 2013] Source 1 is offset by -5.300873 and 2.463598 pixels which is larger than 2 X fitted extent = 0.852722 x 0.852722, not incorporating fit results [Thu Jun 6 03:24:45 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 03:24:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 03:24:45 2013] Assessing source extent using major [Thu Jun 6 03:24:45 2013] Source does appear to be extended [Thu Jun 6 03:24:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 03:25:07 2013] XMMSAS src. selection expression = ellipse(24222.976013, 24312.323059, 652.500000, 652.500000, 0.000000, X, Y) [Thu Jun 6 03:25:07 2013] Writing source region out to fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src1_src.reg [Thu Jun 6 03:25:07 2013] Extracting stamp from image fullrun_pn_xmm0112260101_pi300-10000_cl_sm2.00.img.gz, (241, 243) - (316, 318) [Thu Jun 6 03:25:07 2013] XMMSAS bgd. selection expression = annulus(24222.976013, 24312.323059, 1087.500000, 2175.000000, X, Y) && !ellipse(23741.664337, 24246.852692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23849.344360, 25087.511963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24262.751007, 25259.621582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24704.228000, 25075.798000, 1064.288031, 1064.288031, 0.000000, X, Y) && !ellipse(23170.562225, 24921.150482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23393.297943, 23485.716858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22760.838000, 25189.033800, 1221.912035, 1221.912035, 0.000000, X, Y) && !ellipse(22896.520721, 24491.038391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25198.290405, 24235.842285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.511627, 25958.664246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22749.917200, 26108.828000, 1227.056035, 1227.056035, 0.000000, X, Y) && !ellipse(23745.992035, 26483.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22736.658752, 26658.083923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25192.882111, 25530.543427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21941.265076, 25610.536804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24226.570923, 26737.578156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24649.009979, 26743.023621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25288.521576, 26228.595764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26810.453400, 25778.940002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.168640, 25701.312256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.912170, 25792.257629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21952.047150, 24662.699310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24336.061676, 22522.517365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26317.456940, 26519.329437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27220.188141, 24208.585754, 870.000000, 870.000000, 0.000000, X, Y) [Thu Jun 6 03:25:07 2013] Writing fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src1.gif [Thu Jun 6 03:25:13 2013] Mean detx,y = (212.96, -451.94) [Thu Jun 6 03:25:16 2013] Setting backscal keywords in source and bgd. spectrum [Thu Jun 6 03:25:31 2013] Binned source spectrum to 10 counts/bin [Thu Jun 6 03:25:31 2013] Setting source spectrum file to fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Thu Jun 6 03:25:31 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Thu Jun 6 03:41:44 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Jun 6 03:41:44 2013] rmf not generated due to insufficient counts [Thu Jun 6 05:44:57 2013] Updating aperture counts using extracted products [Thu Jun 6 05:44:57 2013] Total counts from fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2615.00 [Thu Jun 6 05:44:57 2013] Total counts from fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1249.00 [Thu Jun 6 05:44:57 2013] Got source and background scale factors 1238228.000000, 1546878.000000 [Thu Jun 6 05:44:57 2013] User source parameters: Position = (279.0, 280.0) = 2 57 53.57 13 1 45.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1615.2 +/- 52.1 Background aperture counts = 999.8 Rate = 0.2 +/- 0.006 [Thu Jun 6 05:44:57 2013] Updating counts from extracted products [Thu Jun 6 05:44:57 2013] Set source signif. to 1615.21/31.62 = 51.08 [Thu Jun 6 05:45:03 2013] Calculating source flux in energy range 0.30-8.00 [Thu Jun 6 05:45:03 2013] Using photon index=1.80, rate=0.175, arf fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src1.arf [Thu Jun 6 05:45:03 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 6 05:45:03 2013] Updating source flux to 5.4e-13 [Thu Jun 6 05:45:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Jun 6 05:45:22 2013] xmm0112260101/analysis//spectral/fullrun_pn_xmm0112260101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete