[Wed Jun 5 12:39:19 2013] Detection parameters: Position = (280.7, 289.1) = 2 57 53.07 13 2 29.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 245.0 +/- 24.7 Background counts = 83.5 Rate = 0.02 +/- 0.002 [Wed Jun 5 12:39:20 2013] Off-axis axis estimate = 1.46' [Wed Jun 5 18:40:16 2013] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 18:40:16 2013] Initial guess for spatial extent in simple fitting = 7.16" [Wed Jun 5 18:40:16 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.869 [Wed Jun 5 18:40:16 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.16" [Wed Jun 5 21:14:50 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src2.ximg exists [Wed Jun 5 21:14:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src2.csv [Wed Jun 5 21:14:50 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src2_1.ximg exists [Wed Jun 5 21:14:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src2.csv [Wed Jun 5 21:14:50 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 21:14:51 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Wed Jun 5 21:14:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src2.csv [Wed Jun 5 21:14:51 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Wed Jun 5 21:14:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src2.csv [Wed Jun 5 21:14:51 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 21:15:24 2013] Warning, spatial fit 2 centroid is now closest to src. 1 [Wed Jun 5 21:15:24 2013] Source 2 is offset by 2.730186 and 4.913627 pixels which is larger than 2 X fitted extent = 4.359894 x 0.867963, not incorporating fit results [Wed Jun 5 21:15:24 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 21:15:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 21:15:24 2013] Assessing source extent using major [Wed Jun 5 21:15:24 2013] Source does appear to be extended [Wed Jun 5 21:15:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 01:06:15 2013] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 01:06:15 2013] Initial guess for spatial extent in simple fitting = 7.16" [Thu Jun 6 01:06:15 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.869 [Thu Jun 6 01:06:15 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.16" [Thu Jun 6 03:24:35 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src2.ximg exists [Thu Jun 6 03:24:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src2.csv [Thu Jun 6 03:24:35 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src2_1.ximg exists [Thu Jun 6 03:24:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src2.csv [Thu Jun 6 03:24:35 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 03:24:35 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Thu Jun 6 03:24:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src2.csv [Thu Jun 6 03:24:35 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Thu Jun 6 03:24:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src2.csv [Thu Jun 6 03:24:36 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 03:24:58 2013] Spatial fit model total counts = 2142.610000, observed total counts = 1921.000000 [Thu Jun 6 03:24:58 2013] Poor agreement between spatial fit and data for source 2 It may help to tweak spatial fit manually Not incorporating fit results [Thu Jun 6 03:24:58 2013] Source 2 is offset by 3.122140 and 5.714756 pixels which is larger than 2 X fitted extent = 1.498593 x 1.498593, not incorporating fit results [Thu Jun 6 03:24:58 2013] Source 2 is offset by -6.593124 and 0.242319 pixels which is larger than 2 X fitted extent = 6.152598 x 1.471720, not incorporating fit results [Thu Jun 6 03:24:58 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 03:24:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 03:24:58 2013] Assessing source extent using major [Thu Jun 6 03:24:58 2013] Source does appear to be extended [Thu Jun 6 03:24:58 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 05:26:18 2013] XMMSAS src. selection expression = ellipse(24369.860199, 25102.305786, 652.500000, 652.500000, 0.000000, X, Y) [Thu Jun 6 05:26:18 2013] Writing source region out to fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src2_src.reg [Thu Jun 6 05:26:18 2013] Extracting stamp from image fullrun_mos2_xmm0112260101_pi300-10000_cl_sm2.00.img.gz, (243, 252) - (318, 327) [Thu Jun 6 05:26:18 2013] XMMSAS bgd. selection expression = annulus(24369.860199, 25102.305786, 1087.500000, 2175.000000, X, Y) && !ellipse(24146.516000, 24121.096000, 947.392027, 947.392027, 0.000000, X, Y) && !ellipse(23611.111237, 25113.940125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23525.016602, 24672.076874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23814.667023, 25543.130920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23357.678070, 23986.404938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24409.961761, 25964.083160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23995.134674, 26338.017487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24267.994690, 27115.195007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25286.692261, 26042.518036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25251.356476, 24496.295349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23730.074000, 27256.579800, 1199.656035, 1199.656035, 0.000000, X, Y) && !ellipse(24705.904602, 27553.678406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24570.012238, 23532.068359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23201.527832, 25874.975067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.250305, 25538.317352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23269.897491, 26651.993286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25037.658478, 27010.050537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22821.874573, 26826.582703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25948.553894, 25889.800751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.653717, 24997.238312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22465.471405, 24659.316803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22071.648254, 26098.618805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23921.032806, 28072.473785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.324158, 27456.796387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25739.204834, 27484.833496, 870.000000, 870.000000, 0.000000, X, Y) [Thu Jun 6 05:26:18 2013] Writing fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src2.gif [Thu Jun 6 05:26:36 2013] Mean detx,y = (-54.21, -432.91) [Thu Jun 6 05:26:37 2013] Setting backscal keywords in source and bgd. spectrum [Thu Jun 6 05:26:44 2013] Binned source spectrum to 10 counts/bin [Thu Jun 6 05:26:44 2013] Setting source spectrum file to fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Thu Jun 6 05:26:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src2_bgd.pi.gz [Thu Jun 6 05:32:44 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Jun 6 05:32:44 2013] rmf not generated due to insufficient counts [Thu Jun 6 05:45:07 2013] Updating aperture counts using extracted products [Thu Jun 6 05:45:07 2013] Total counts from fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 1349.00 [Thu Jun 6 05:45:07 2013] Total counts from fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 169.00 [Thu Jun 6 05:45:07 2013] Got source and background scale factors 1202820.000000, 306476.000000 [Thu Jun 6 05:45:07 2013] User source parameters: Position = (280.7, 289.1) = 2 57 53.07 13 2 29.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 685.7 +/- 37.7 Background aperture counts = 663.3 Rate = 0.05 +/- 0.003 [Thu Jun 6 05:45:07 2013] Updating counts from extracted products [Thu Jun 6 05:45:07 2013] Set source signif. to 685.73/25.75 = 26.63 [Thu Jun 6 05:45:11 2013] Calculating source flux in energy range 0.30-8.00 [Thu Jun 6 05:45:11 2013] Using photon index=1.80, rate=0.048, arf fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src2.arf [Thu Jun 6 05:45:11 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 6 05:45:11 2013] Updating source flux to 5.5e-13 [Thu Jun 6 05:45:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Jun 6 05:45:19 2013] xmm0112260101/analysis//spectral/fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete