[Wed Jun  5 12:39:19 2013] Detection parameters:
  Position = (276.4, 303.3) = 2 57 54.35 13 3 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.8 +/- 17.0
  Background counts = 75.0
  Rate = 0.01 +/- 0.001

[Wed Jun  5 12:39:20 2013] Off-axis axis estimate = 1.64'
[Wed Jun  5 18:40:16 2013] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 18:40:16 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Jun  5 18:40:16 2013] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.693
[Wed Jun  5 18:40:16 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.25"
[Wed Jun  5 21:14:50 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jun  5 21:14:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src11.csv
[Wed Jun  5 21:14:50 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jun  5 21:14:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src11.csv
[Wed Jun  5 21:14:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 21:14:51 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun  5 21:14:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun  5 21:14:51 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun  5 21:14:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun  5 21:14:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 21:15:24 2013] Warning, spatial fit 11 centroid is now closest to src. 11
[Wed Jun  5 21:15:24 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 21:15:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 21:15:24 2013] Assessing source extent using major
[Wed Jun  5 21:15:24 2013] Source does appear to be extended
[Wed Jun  5 21:15:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 21:15:24 2013] Source is confused with source 11
[Thu Jun  6 01:06:15 2013] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 01:06:15 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Thu Jun  6 01:06:15 2013] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.693
[Thu Jun  6 01:06:15 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 7.25"
[Thu Jun  6 03:24:35 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jun  6 03:24:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src9.csv
[Thu Jun  6 03:24:35 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jun  6 03:24:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src9.csv
[Thu Jun  6 03:24:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 03:24:36 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jun  6 03:24:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu Jun  6 03:24:36 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jun  6 03:24:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu Jun  6 03:24:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 03:24:58 2013] Warning, spatial fit 9 centroid is now closest to src. 14
[Thu Jun  6 03:24:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 03:24:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 03:24:58 2013] Assessing source extent using major
[Thu Jun  6 03:24:58 2013] Source does appear to be extended
[Thu Jun  6 03:24:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 05:26:19 2013] XMMSAS src. selection expression = ellipse(23995.134674, 26338.017487, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  6 05:26:19 2013] Writing source region out to fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src13_src.reg
[Thu Jun  6 05:26:19 2013] Extracting stamp from image fullrun_mos2_xmm0112260101_pi300-10000_cl_sm2.00.img.gz, (239, 266) - (314, 341)
[Thu Jun  6 05:26:19 2013] XMMSAS bgd. selection expression = annulus(23995.134674, 26338.017487, 1087.500000, 2175.000000, X, Y) && !ellipse(24146.516000, 24121.096000, 947.392027, 947.392027, 0.000000, X, Y) && !ellipse(24369.860199, 25102.305786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23611.111237, 25113.940125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23525.016602, 24672.076874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23814.667023, 25543.130920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23357.678070, 23986.404938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24409.961761, 25964.083160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24267.994690, 27115.195007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25286.692261, 26042.518036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25251.356476, 24496.295349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23730.074000, 27256.579800, 1199.656035, 1199.656035, 0.000000, X, Y) && !ellipse(24705.904602, 27553.678406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24570.012238, 23532.068359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23201.527832, 25874.975067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.250305, 25538.317352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23269.897491, 26651.993286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25037.658478, 27010.050537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22821.874573, 26826.582703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25948.553894, 25889.800751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.653717, 24997.238312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22465.471405, 24659.316803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22071.648254, 26098.618805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23921.032806, 28072.473785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.324158, 27456.796387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25739.204834, 27484.833496, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 05:26:19 2013] Writing fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src13.gif
[Thu Jun  6 05:27:51 2013] Mean detx,y = (-804.73, -1528.00) 
[Thu Jun  6 05:27:52 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 05:28:00 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 05:28:00 2013] Setting source spectrum file to fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun  6 05:28:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jun  6 05:33:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun  6 05:33:46 2013] rmf not generated due to insufficient counts
[Thu Jun  6 05:45:08 2013] Updating aperture counts using extracted products
[Thu Jun  6 05:45:08 2013] Total counts from fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 905.00
[Thu Jun  6 05:45:08 2013] Total counts from fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 78.00
[Thu Jun  6 05:45:08 2013] Got source and background scale factors 1119316.000000, 190400.000000
[Thu Jun  6 05:45:08 2013] User source parameters:
  Position = (276.4, 303.3) = 2 57 54.35 13 3 25.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 446.5 +/- 31.1
  Background aperture counts = 458.5
  Rate = 0.03 +/- 0.002

[Thu Jun  6 05:45:08 2013] Updating counts from extracted products
[Thu Jun  6 05:45:08 2013] Set source signif. to 446.46/21.41 = 20.85
[Thu Jun  6 05:45:11 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 05:45:11 2013] Using photon index=1.80, rate=0.0312, arf fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src13.arf
[Thu Jun  6 05:45:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 05:45:11 2013] Updating source flux to 3.8e-13
[Thu Jun  6 05:45:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun  6 05:45:19 2013] xmm0112260101/analysis//spectral/fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete