[Wed Jun 5 12:39:19 2013] Detection parameters: Position = (276.9, 278.0) = 2 57 54.18 13 1 39.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 285.8 +/- 25.0 Background counts = 77.8 Rate = 0.02 +/- 0.002 [Wed Jun 5 12:39:20 2013] Off-axis axis estimate = 2.15' [Wed Jun 5 18:40:16 2013] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 18:40:16 2013] Initial guess for spatial extent in simple fitting = 7.51" [Wed Jun 5 18:40:16 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808 [Wed Jun 5 18:40:16 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.51" [Wed Jun 5 21:14:50 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src1.ximg exists [Wed Jun 5 21:14:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src1.csv [Wed Jun 5 21:14:50 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src1_1.ximg exists [Wed Jun 5 21:14:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src1.csv [Wed Jun 5 21:14:50 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 21:14:51 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed Jun 5 21:14:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src1.csv [Wed Jun 5 21:14:51 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed Jun 5 21:14:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src1.csv [Wed Jun 5 21:14:51 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112260101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 21:15:24 2013] Warning, spatial fit 1 centroid is now closest to src. 5 [Wed Jun 5 21:15:24 2013] Source 1 is offset by -0.726017 and -5.633858 pixels which is larger than 2 X fitted extent = 1.468198 x 1.468198, not incorporating fit results [Wed Jun 5 21:15:24 2013] Source 1 is offset by -0.463189 and -5.550134 pixels which is larger than 2 X fitted extent = 0.855766 x 2.400878, not incorporating fit results [Wed Jun 5 21:15:24 2013] Spatial fit model total counts = 1722.120000, observed total counts = 1498.000000 [Wed Jun 5 21:15:24 2013] Poor agreement between spatial fit and data for source 1 It may help to tweak spatial fit manually Not incorporating fit results [Wed Jun 5 21:15:24 2013] Source 1 is offset by -4.103212 and -4.599329 pixels which is larger than 2 X fitted extent = 0.805660 x 1.655839, not incorporating fit results [Wed Jun 5 21:15:24 2013] Source 1 is offset by -4.666293 and -3.306962 pixels which is larger than 2 X fitted extent = 0.843917 x 2.459347, not incorporating fit results [Wed Jun 5 21:15:24 2013] Spatial fit model total counts = 1611.510000, observed total counts = 1607.000000 [Wed Jun 5 21:15:24 2013] Offset between fit and detection position for source 1 = 1.176829 pixels [Wed Jun 5 21:15:24 2013] Warning, changing simple spatial fit ID from 1 to 21 [Wed Jun 5 21:15:24 2013] 1629.723000 total counts/ 1546.960000 bgd. counts: snr = 2.104247 Spatial fit parameters: Offset between fit and detection position for source 1 = 1.176829 pixels Position = (278.1, 277.8) = 2 57 53.83 13 1 37.0 Extent = 11.8 (5.3-15.1)", rotation angle = 0 Source counts = 82.8 +/- 40.4 Background counts = 1547.0 Rate = 0.006 +/- 0.003 [Wed Jun 5 21:15:24 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 21:15:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 21:15:24 2013] Assessing source extent using major axis lower bound [Wed Jun 5 21:15:24 2013] Source does appear to be extended [Wed Jun 5 21:15:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 01:06:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Jun 6 01:06:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Jun 6 01:06:15 2013] Initial guess for spatial extent in simple fitting = 11.84" [Thu Jun 6 01:06:15 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.867 [Thu Jun 6 01:06:15 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.84" [Thu Jun 6 03:24:35 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src1.ximg exists [Thu Jun 6 03:24:35 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src1_1.ximg exists [Thu Jun 6 03:24:35 2013] Fit fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_src1 appears to have run properly [Thu Jun 6 03:24:35 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Thu Jun 6 03:24:35 2013] fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Thu Jun 6 03:24:35 2013] Fit fullrun_mos2_xmm0112260101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Thu Jun 6 03:24:58 2013] Warning, spatial fit 1 centroid is now closest to src. 28 [Thu Jun 6 03:24:58 2013] Spatial fit model total counts = 2030.040000, observed total counts = 1772.000000 [Thu Jun 6 03:24:58 2013] Poor agreement between spatial fit and data for source 1 It may help to tweak spatial fit manually Not incorporating fit results [Thu Jun 6 03:24:58 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 03:24:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 03:24:58 2013] Assessing source extent using major axis lower bound [Thu Jun 6 03:24:58 2013] Source does appear to be extended [Thu Jun 6 03:24:58 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 05:26:18 2013] XMMSAS src. selection expression = ellipse(24146.516000, 24121.096000, 710.544020, 710.544020, 0.000000, X, Y) [Thu Jun 6 05:26:18 2013] Writing source region out to fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src1_src.reg [Thu Jun 6 05:26:18 2013] Extracting stamp from image fullrun_mos2_xmm0112260101_pi300-10000_cl_sm2.00.img.gz, (237, 237) - (319, 319) [Thu Jun 6 05:26:18 2013] XMMSAS bgd. selection expression = annulus(24146.516000, 24121.096000, 1184.240034, 2368.480068, X, Y) && !ellipse(24369.860199, 25102.305786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23611.111237, 25113.940125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23525.016602, 24672.076874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23814.667023, 25543.130920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23357.678070, 23986.404938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24409.961761, 25964.083160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23995.134674, 26338.017487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24267.994690, 27115.195007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25286.692261, 26042.518036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25251.356476, 24496.295349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23730.074000, 27256.579800, 1199.656035, 1199.656035, 0.000000, X, Y) && !ellipse(24570.012238, 23532.068359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23201.527832, 25874.975067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.250305, 25538.317352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23269.897491, 26651.993286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25037.658478, 27010.050537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22821.874573, 26826.582703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25948.553894, 25889.800751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.653717, 24997.238312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22465.471405, 24659.316803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22071.648254, 26098.618805, 870.000000, 870.000000, 0.000000, X, Y) [Thu Jun 6 05:26:18 2013] Writing fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src1.gif [Thu Jun 6 05:26:22 2013] Mean detx,y = (-46.34, 522.13) [Thu Jun 6 05:26:23 2013] Setting backscal keywords in source and bgd. spectrum [Thu Jun 6 05:26:33 2013] Binned source spectrum to 10 counts/bin [Thu Jun 6 05:26:33 2013] Setting source spectrum file to fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Thu Jun 6 05:26:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Thu Jun 6 05:32:26 2013] Not generating rmf since there are only 82 counts [Thu Jun 6 05:32:26 2013] rmf not generated due to insufficient counts [Thu Jun 6 05:45:07 2013] Updating aperture counts using extracted products [Thu Jun 6 05:45:07 2013] Total counts from fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1608.00 [Thu Jun 6 05:45:07 2013] Total counts from fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1986.00 [Thu Jun 6 05:45:07 2013] Got source and background scale factors 1431944.000000, 4845468.000000 [Thu Jun 6 05:45:07 2013] User source parameters: Position = (278.1, 277.8) = 2 57 53.83 13 1 37.0 Extent = 11.8 (5.3-15.1)", rotation angle = 0 Source aperture counts = 1021.1 +/- 41.1 Background aperture counts = 586.9 Rate = 0.07 +/- 0.003 [Thu Jun 6 05:45:11 2013] Calculating source flux in energy range 0.30-8.00 [Thu Jun 6 05:45:11 2013] Using photon index=1.80, rate=0.00579, arf fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src1.arf [Thu Jun 6 05:45:11 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 6 05:45:11 2013] Updating source flux to 6.1e-14 [Thu Jun 6 05:45:18 2013] Flag b found in src. 1 procflags, skipping spectral fitting [Thu Jun 6 05:45:18 2013] Flag p found in src. 1 procflags, skipping spectral fitting [Thu Jun 6 05:45:18 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting [Thu Jun 6 05:45:19 2013] xmm0112260101/analysis//spectral/fullrun_mos2_xmm0112260101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete