[Tue Jun 11 08:51:08 2013] Detection parameters:
  Position = (250.8, 497.9) = 14 16 2.08 11 42 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.5 +/- 13.7
  Background counts = 20.1
  Rate = 0.004 +/- 0.0005

[Tue Jun 11 08:51:08 2013] Off-axis axis estimate = 14.87'
[Tue Jun 11 08:53:11 2013] Using EEF radius (= 13.86 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 08:53:11 2013] Initial guess for spatial extent in simple fitting = 13.86"
[Tue Jun 11 08:53:11 2013] source mask rpix=3.2, npix_max = 54, mask sum = 58, frac = 1.067
[Tue Jun 11 08:53:11 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 13.86"
[Tue Jun 11 09:44:11 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_src43.ximg exists
[Tue Jun 11 09:44:11 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_src43.csv
[Tue Jun 11 09:44:11 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_src43_1.ximg exists
[Tue Jun 11 09:44:11 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_src43.csv
[Tue Jun 11 09:44:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 09:44:12 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Tue Jun 11 09:44:12 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src43.csv
[Tue Jun 11 09:44:12 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Tue Jun 11 09:44:12 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src43.csv
[Tue Jun 11 09:44:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 10:51:19 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 17.870345 pixels away
[Tue Jun 11 10:51:19 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 10:51:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 10:51:19 2013] Assessing source extent using major
[Tue Jun 11 10:51:19 2013] Source does appear to be extended
[Tue Jun 11 10:51:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 10:51:41 2013] Using EEF radius (= 13.86 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 10:51:41 2013] Initial guess for spatial extent in simple fitting = 13.86"
[Tue Jun 11 10:51:41 2013] source mask rpix=3.2, npix_max = 54, mask sum = 58, frac = 1.067
[Tue Jun 11 10:51:41 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 13.86"
[Tue Jun 11 11:39:30 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src43.ximg exists
[Tue Jun 11 11:39:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src43.csv
[Tue Jun 11 11:39:30 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src43_1.ximg exists
[Tue Jun 11 11:39:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src43.csv
[Tue Jun 11 11:39:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 11:39:30 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Tue Jun 11 11:39:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src43.csv
[Tue Jun 11 11:39:30 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Tue Jun 11 11:39:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src43.csv
[Tue Jun 11 11:39:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 12:38:47 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 17.870345 pixels away
[Tue Jun 11 12:38:47 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 12:38:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 12:38:47 2013] Assessing source extent using major
[Tue Jun 11 12:38:47 2013] Source does appear to be extended
[Tue Jun 11 12:38:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 12:39:07 2013] XMMSAS src. selection expression = ellipse(21772.466278, 43272.710327, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 11 12:39:07 2013] Writing source region out to fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src46_src.reg
[Tue Jun 11 12:39:07 2013] Extracting stamp from image fullrun_pn_xmm0112251301_pi300-10000_cl_sm2.00.img.gz, (213, 460) - (288, 535)
[Tue Jun 11 12:39:07 2013] XMMSAS bgd. selection expression = annulus(21772.466278, 43272.710327, 1087.500000, 2175.000000, X, Y)
[Tue Jun 11 12:39:07 2013] Writing fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src46.gif
[Tue Jun 11 12:59:09 2013] Mean detx,y = (-297.99, -16268.69) 
[Tue Jun 11 12:59:11 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 12:59:26 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 12:59:26 2013] Setting source spectrum file to fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Tue Jun 11 12:59:26 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Tue Jun 11 13:18:12 2013] Not generating rmf since there are only 94 counts
[Tue Jun 11 13:18:12 2013] rmf not generated due to insufficient counts
[Tue Jun 11 13:55:35 2013] Updating aperture counts using extracted products
[Tue Jun 11 13:55:35 2013] Total counts from fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 190.00
[Tue Jun 11 13:55:35 2013] Total counts from fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src46_bgd.pi.gz = 612.00
[Tue Jun 11 13:55:35 2013] Got source and background scale factors 849714.000000, 3493274.000000
[Tue Jun 11 13:55:35 2013] User source parameters:
  Position = (250.8, 497.9) = 14 16 2.08 11 42 30.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 41.1 +/- 14.8
  Background aperture counts = 148.9
  Rate = 0.002 +/- 0.0006

[Tue Jun 11 13:55:35 2013] Updating counts from extracted products
[Tue Jun 11 13:55:35 2013] Set source signif. to 41.14/12.20 = 3.37
[Tue Jun 11 13:55:36 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 13:55:36 2013] Using photon index=1.80, rate=0.00158, arf fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src46.arf
[Tue Jun 11 13:55:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 13:55:36 2013] Updating source flux to 1.3e-14
[Tue Jun 11 13:55:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 13:55:55 2013] xmm0112251301/analysis//spectral/fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete