[Tue Jun 11 08:51:07 2013] Detection parameters:
  Position = (354.3, 352.1) = 14 15 31.45 11 31 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3046.1 +/- 66.4
  Background counts = 34.8
  Rate = 0.2 +/- 0.003

[Tue Jun 11 08:51:08 2013] Off-axis axis estimate = 5.62'
[Tue Jun 11 08:53:11 2013] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 08:53:11 2013] Initial guess for spatial extent in simple fitting = 9.24"
[Tue Jun 11 08:53:11 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.908
[Tue Jun 11 08:53:11 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.24"
[Tue Jun 11 09:44:11 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 11 09:44:11 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 11 09:44:11 2013] Fit fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue Jun 11 09:44:11 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 11 09:44:11 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 11 09:44:11 2013] Fit fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jun 11 10:51:19 2013] Spatial fit model total counts = 3105.550000, observed total counts = 2946.000000
[Tue Jun 11 10:51:19 2013] Offset between fit and detection position for source 3 = 0.197168 pixels
[Tue Jun 11 10:51:19 2013] 3094.162000 total counts/ 924.692000 bgd. counts: snr = 71.343613
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.197168 pixels
  Position = (354.1, 352.2) = 14 15 31.51 11 31 56.5
  Extent = 5.8 (5.5-6.1)" x 5.4 (5.1-5.6)", rotation angle = 38 (11-66) degrees
  Source counts = 2169.5 +/- 55.6
  Background counts = 924.7
  Rate = 0.08 +/- 0.002
[Tue Jun 11 10:51:19 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 10:51:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 10:51:19 2013] Assessing source extent using major axis lower bound
[Tue Jun 11 10:51:19 2013] Source does appear to be extended
[Tue Jun 11 10:51:19 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Tue Jun 11 10:51:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 11 10:51:41 2013] Initial guess for spatial extent in simple fitting = 5.58"
[Tue Jun 11 10:51:41 2013] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.257
[Tue Jun 11 10:51:41 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 5.58"
[Tue Jun 11 11:39:29 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 11 11:39:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src3.csv
[Tue Jun 11 11:39:29 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 11 11:39:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src3.csv
[Tue Jun 11 11:39:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 11:39:30 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 11 11:39:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 11 11:39:30 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 11 11:39:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 11 11:39:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 12:38:47 2013] Warning, spatial fit 3 centroid is now closest to src. 11
[Tue Jun 11 12:38:47 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 12:38:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 12:38:47 2013] Assessing source extent using major axis lower bound
[Tue Jun 11 12:38:47 2013] Source does appear to be extended
[Tue Jun 11 12:38:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Tue Jun 11 12:39:06 2013] Counts = 2169.470000, rescaling region sizes by 2.000000
[Tue Jun 11 12:39:06 2013] XMMSAS src. selection expression = ellipse(30756.781240, 30593.189600, 694.624820, 645.667219, 37.786821, X, Y)
[Tue Jun 11 12:39:06 2013] Writing source region out to fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 11 12:39:06 2013] Extracting stamp from image fullrun_pn_xmm0112251301_pi300-10000_cl_sm2.00.img.gz, (314, 312) - (394, 392)
[Tue Jun 11 12:39:06 2013] XMMSAS bgd. selection expression = annulus(30756.781240, 30593.189600, 2315.416067, 4630.832133, X, Y) && !ellipse(32943.257782, 30314.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30618.782288, 26917.713928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34118.527740, 35693.480499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33730.856293, 34895.038849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32556.446564, 33424.118103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29729.251892, 32657.207581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35527.278320, 29529.463593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32383.172000, 28403.383000, 475.115214, 343.339210, 120.560235, X, Y) && !ellipse(26417.043660, 27906.721600, 343.942410, 343.942410, 0.000000, X, Y) && !ellipse(28732.902440, 27525.576600, 412.360012, 412.360012, 0.000000, X, Y) && !ellipse(33937.786621, 25889.936157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28799.730000, 25631.960600, 344.320010, 344.320010, 0.000000, X, Y)
[Tue Jun 11 12:39:06 2013] Writing fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src3.gif
[Tue Jun 11 12:40:08 2013] Mean detx,y = (4882.39, -1692.81) 
[Tue Jun 11 12:40:11 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 12:40:46 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 12:40:46 2013] Setting source spectrum file to fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 11 12:40:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 11 13:55:27 2013] Updating aperture counts using extracted products
[Tue Jun 11 13:55:27 2013] Total counts from fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 2840.00
[Tue Jun 11 13:55:27 2013] Total counts from fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 6119.00
[Tue Jun 11 13:55:27 2013] Got source and background scale factors 1276440.000000, 36712973.000000
[Tue Jun 11 13:55:27 2013] User source parameters:
  Position = (354.1, 352.2) = 14 15 31.51 11 31 56.5
  Extent = 5.8 (5.5-6.1)" x 5.4 (5.1-5.6)", rotation angle = 38 (11-66) degrees
  Source aperture counts = 2627.3 +/- 54.3
  Background aperture counts = 212.7
  Rate = 0.1 +/- 0.002

[Tue Jun 11 13:55:35 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 13:55:35 2013] Using photon index=1.80, rate=0.0834, arf fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src3.arf
[Tue Jun 11 13:55:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 13:55:36 2013] Updating source flux to 2.6e-13
[Tue Jun 11 13:55:55 2013] xmm0112251301/analysis//spectral/fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete