[Tue Jun 11 08:51:08 2013] Detection parameters: Position = (392.7, 410.8) = 14 15 20.06 11 36 11.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 70.3 +/- 12.6 Background counts = 27.9 Rate = 0.005 +/- 0.0009 [Tue Jun 11 08:51:08 2013] Off-axis axis estimate = 10.64' [Tue Jun 11 08:53:11 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting [Tue Jun 11 08:53:11 2013] Initial guess for spatial extent in simple fitting = 11.75" [Tue Jun 11 08:53:11 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.879 [Tue Jun 11 08:53:11 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 11.75" [Tue Jun 11 09:44:11 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_src19.ximg exists [Tue Jun 11 09:44:11 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_src19_1.ximg exists [Tue Jun 11 09:44:11 2013] Fit fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_src19 appears to have run properly [Tue Jun 11 09:44:11 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists [Tue Jun 11 09:44:11 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists [Tue Jun 11 09:44:11 2013] Fit fullrun_pn_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly [Tue Jun 11 10:51:19 2013] Source 20 is offset by 1.151836 and -8.595557 pixels which is larger than 2 X fitted extent = 1.391224 x 1.391224, not incorporating fit results [Tue Jun 11 10:51:19 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.024125 pixels away [Tue Jun 11 10:51:19 2013] Source 20 is offset by -1.246026 and -1.644040 pixels which is larger than 2 X fitted extent = 1.309044 x 1.309044, not incorporating fit results [Tue Jun 11 10:51:19 2013] Vigneting correction estimate = 1.000000 [Tue Jun 11 10:51:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jun 11 10:51:19 2013] Assessing source extent using major [Tue Jun 11 10:51:19 2013] Source does appear to be extended [Tue Jun 11 10:51:19 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jun 11 10:51:41 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting [Tue Jun 11 10:51:41 2013] Initial guess for spatial extent in simple fitting = 11.75" [Tue Jun 11 10:51:41 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.879 [Tue Jun 11 10:51:41 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 11.75" [Tue Jun 11 11:39:29 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src19.ximg exists [Tue Jun 11 11:39:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src19.csv [Tue Jun 11 11:39:29 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src19_1.ximg exists [Tue Jun 11 11:39:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src19.csv [Tue Jun 11 11:39:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 11 11:39:30 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Tue Jun 11 11:39:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src19.csv [Tue Jun 11 11:39:30 2013] fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Tue Jun 11 11:39:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src19.csv [Tue Jun 11 11:39:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 11 12:38:47 2013] Source 20 is offset by 1.144250 and -8.596684 pixels which is larger than 2 X fitted extent = 1.390842 x 1.390842, not incorporating fit results [Tue Jun 11 12:38:47 2013] Warning, spatial fit 19 centroid is now closest to src. 21 [Tue Jun 11 12:38:47 2013] Spatial fit model total counts = 407.862000, observed total counts = 323.000000 [Tue Jun 11 12:38:47 2013] Poor agreement between spatial fit and data for source 20 It may help to tweak spatial fit manually Not incorporating fit results [Tue Jun 11 12:38:47 2013] Vigneting correction estimate = 1.000000 [Tue Jun 11 12:38:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jun 11 12:38:47 2013] Assessing source extent using major [Tue Jun 11 12:38:47 2013] Source does appear to be extended [Tue Jun 11 12:38:47 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jun 11 12:39:06 2013] XMMSAS src. selection expression = ellipse(34118.527740, 35693.480499, 652.500000, 652.500000, 0.000000, X, Y) [Tue Jun 11 12:39:06 2013] Writing source region out to fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src20_src.reg [Tue Jun 11 12:39:06 2013] Extracting stamp from image fullrun_pn_xmm0112251301_pi300-10000_cl_sm2.00.img.gz, (355, 373) - (430, 448) [Tue Jun 11 12:39:06 2013] XMMSAS bgd. selection expression = annulus(34118.527740, 35693.480499, 1087.500000, 2175.000000, X, Y) && !ellipse(36482.119781, 37966.432495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33080.382080, 37381.338379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33730.856293, 34895.038849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32556.446564, 33424.118103, 870.000000, 870.000000, 0.000000, X, Y) [Tue Jun 11 12:39:06 2013] Writing fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src20.gif [Tue Jun 11 12:48:46 2013] Mean detx,y = (9520.64, -5640.42) [Tue Jun 11 12:48:48 2013] Setting backscal keywords in source and bgd. spectrum [Tue Jun 11 12:48:57 2013] Binned source spectrum to 10 counts/bin [Tue Jun 11 12:48:58 2013] Setting source spectrum file to fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Tue Jun 11 12:48:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src20_bgd.pi.gz [Tue Jun 11 13:10:27 2013] Not generating rmf since there are only 70 counts [Tue Jun 11 13:10:27 2013] rmf not generated due to insufficient counts [Tue Jun 11 13:55:30 2013] Updating aperture counts using extracted products [Tue Jun 11 13:55:30 2013] Total counts from fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 239.00 [Tue Jun 11 13:55:30 2013] Total counts from fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src20_bgd.pi.gz = 1143.00 [Tue Jun 11 13:55:30 2013] Got source and background scale factors 1334400.000000, 8208265.000000 [Tue Jun 11 13:55:30 2013] User source parameters: Position = (392.7, 410.8) = 14 15 20.06 11 36 11.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 53.2 +/- 16.5 Background aperture counts = 185.8 Rate = 0.002 +/- 0.0006 [Tue Jun 11 13:55:30 2013] Updating counts from extracted products [Tue Jun 11 13:55:30 2013] Set source signif. to 53.18/13.63 = 3.90 [Tue Jun 11 13:55:36 2013] Calculating source flux in energy range 0.30-8.00 [Tue Jun 11 13:55:36 2013] Using photon index=1.80, rate=0.00205, arf fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src20.arf [Tue Jun 11 13:55:36 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jun 11 13:55:36 2013] Updating source flux to 9.4e-15 [Tue Jun 11 13:55:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue Jun 11 13:55:55 2013] xmm0112251301/analysis//spectral/fullrun_pn_xmm0112251301_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete