[Tue Jun 11 08:51:59 2013] Detection parameters:
  Position = (423.4, 464.5) = 14 15 10.98 11 40 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.5 +/- 8.5
  Background counts = 6.8
  Rate = 0.002 +/- 0.0003

[Tue Jun 11 08:52:00 2013] Off-axis axis estimate = 15.07'
[Tue Jun 11 10:15:25 2013] Using EEF radius (= 13.96 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 10:15:25 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 11 10:15:25 2013] Initial guess for spatial extent in simple fitting = 13.96"
[Tue Jun 11 10:15:25 2013] source mask rpix=3.2, npix_max = 55, mask sum = 31, frac = 0.563
[Tue Jun 11 10:15:25 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 13.96"
[Tue Jun 11 10:51:10 2013] fullrun_mos2_xmm0112251301_pi300-10000_cl_pass0_src28.ximg exists
[Tue Jun 11 10:51:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112251301_pi300-10000_cl_pass0_src28.csv
[Tue Jun 11 10:51:10 2013] fullrun_mos2_xmm0112251301_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue Jun 11 10:51:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112251301_pi300-10000_cl_pass0_src28.csv
[Tue Jun 11 10:51:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112251301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112251301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 10:51:11 2013] fullrun_mos2_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue Jun 11 10:51:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue Jun 11 10:51:11 2013] fullrun_mos2_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Jun 11 10:51:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue Jun 11 10:51:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 10:51:29 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 14.077641 pixels away
[Tue Jun 11 10:51:30 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 10:51:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 10:51:30 2013] Assessing source extent using major
[Tue Jun 11 10:51:30 2013] Source does appear to be extended
[Tue Jun 11 10:51:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 12:07:25 2013] Using EEF radius (= 13.96 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 12:07:25 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 11 12:07:25 2013] Initial guess for spatial extent in simple fitting = 13.96"
[Tue Jun 11 12:07:25 2013] source mask rpix=3.2, npix_max = 55, mask sum = 31, frac = 0.563
[Tue Jun 11 12:07:25 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 13.96"
[Tue Jun 11 12:38:41 2013] fullrun_mos2_xmm0112251301_pi300-10000_cl_pass1_src28.ximg exists
[Tue Jun 11 12:38:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112251301_pi300-10000_cl_pass1_src28.csv
[Tue Jun 11 12:38:41 2013] fullrun_mos2_xmm0112251301_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Jun 11 12:38:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112251301_pi300-10000_cl_pass1_src28.csv
[Tue Jun 11 12:38:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112251301_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112251301_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 12:38:41 2013] fullrun_mos2_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Jun 11 12:38:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src28.csv
[Tue Jun 11 12:38:41 2013] fullrun_mos2_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Jun 11 12:38:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src28.csv
[Tue Jun 11 12:38:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 12:38:55 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 17.547051 pixels away
[Tue Jun 11 12:38:55 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 12:38:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 12:38:55 2013] Assessing source extent using major
[Tue Jun 11 12:38:55 2013] Source does appear to be extended
[Tue Jun 11 12:38:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 13:32:22 2013] XMMSAS src. selection expression = ellipse(36784.737366, 40363.724823, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 11 13:32:22 2013] Writing source region out to fullrun_mos2_xmm0112251301_pi300-10000_pass1_cl_src14_src.reg
[Tue Jun 11 13:32:22 2013] Extracting stamp from image fullrun_mos2_xmm0112251301_pi300-10000_cl_sm2.00.img.gz, (386, 427) - (461, 502)
[Tue Jun 11 13:32:22 2013] XMMSAS bgd. selection expression = annulus(36784.737366, 40363.724823, 1087.500000, 2175.000000, X, Y) && !ellipse(36502.430200, 37970.580600, 562.548016, 262.372808, 44.681949, X, Y)
[Tue Jun 11 13:32:22 2013] Writing fullrun_mos2_xmm0112251301_pi300-10000_pass1_cl_src14.gif
[Tue Jun 11 13:39:11 2013] Mean detx,y = (-12966.93, 9413.83) 
[Tue Jun 11 13:39:12 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 13:39:21 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 13:39:21 2013] Setting source spectrum file to fullrun_mos2_xmm0112251301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jun 11 13:39:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112251301_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Jun 11 13:54:24 2013] Not generating rmf since there are only 50 counts
[Tue Jun 11 13:54:24 2013] rmf not generated due to insufficient counts
[Tue Jun 11 13:55:44 2013] Updating aperture counts using extracted products
[Tue Jun 11 13:55:44 2013] Total counts from fullrun_mos2_xmm0112251301_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 70.00
[Tue Jun 11 13:55:44 2013] Total counts from fullrun_mos2_xmm0112251301_pi300-10000_pass1_cl_src14_bgd.pi.gz = 219.00
[Tue Jun 11 13:55:45 2013] Got source and background scale factors 724022.000000, 5172008.000000
[Tue Jun 11 13:55:45 2013] User source parameters:
  Position = (423.4, 464.5) = 14 15 10.98 11 40 3.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 39.3 +/- 9.4
  Background aperture counts = 30.7
  Rate = 0.001 +/- 0.0003

[Tue Jun 11 13:55:45 2013] Updating counts from extracted products
[Tue Jun 11 13:55:45 2013] Set source signif. to 39.34/5.54 = 7.11
[Tue Jun 11 13:55:45 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 13:55:45 2013] Using photon index=1.80, rate=0.00134, arf fullrun_mos2_xmm0112251301_pi300-10000_pass1_cl_src14.arf
[Tue Jun 11 13:55:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 13:55:45 2013] Updating source flux to 3e-12
[Tue Jun 11 13:55:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 13:55:51 2013] xmm0112251301/analysis//spectral/fullrun_mos2_xmm0112251301_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete