[Tue Jun 11 08:51:33 2013] Detection parameters:
  Position = (407.5, 239.0) = 14 15 15.71 11 23 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.8 +/- 16.6
  Background counts = 9.5
  Rate = 0.004 +/- 0.0006

[Tue Jun 11 08:51:34 2013] Off-axis axis estimate = 9.01'
[Tue Jun 11 09:44:12 2013] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 09:44:12 2013] Initial guess for spatial extent in simple fitting = 10.93"
[Tue Jun 11 09:44:12 2013] source mask rpix=2.5, npix_max = 36, mask sum = 21, frac = 0.578
[Tue Jun 11 09:44:12 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.93"
[Tue Jun 11 10:15:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jun 11 10:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src10.csv
[Tue Jun 11 10:15:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jun 11 10:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src10.csv
[Tue Jun 11 10:15:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 10:15:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jun 11 10:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jun 11 10:15:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jun 11 10:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jun 11 10:15:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 10:51:24 2013] Spatial fit model total counts = 280.073000, observed total counts = 184.000000
[Tue Jun 11 10:51:24 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 11 10:51:24 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 10:51:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 10:51:24 2013] Assessing source extent using major
[Tue Jun 11 10:51:24 2013] Source does appear to be extended
[Tue Jun 11 10:51:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 11:39:30 2013] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 11:39:30 2013] Initial guess for spatial extent in simple fitting = 10.93"
[Tue Jun 11 11:39:30 2013] source mask rpix=2.5, npix_max = 36, mask sum = 21, frac = 0.578
[Tue Jun 11 11:39:30 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.93"
[Tue Jun 11 12:07:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jun 11 12:07:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src10.csv
[Tue Jun 11 12:07:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jun 11 12:07:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src10.csv
[Tue Jun 11 12:07:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 12:07:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jun 11 12:07:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jun 11 12:07:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jun 11 12:07:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jun 11 12:07:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 12:38:50 2013] Spatial fit model total counts = 280.840000, observed total counts = 184.000000
[Tue Jun 11 12:38:50 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 11 12:38:50 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 12:38:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 12:38:50 2013] Assessing source extent using major
[Tue Jun 11 12:38:50 2013] Source does appear to be extended
[Tue Jun 11 12:38:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 13:18:20 2013] XMMSAS src. selection expression = ellipse(35404.005310, 20744.400436, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 11 13:18:20 2013] Writing source region out to fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 11 13:18:20 2013] Extracting stamp from image fullrun_mos1_xmm0112251301_pi300-10000_cl_sm2.00.img.gz, (370, 201) - (445, 276)
[Tue Jun 11 13:18:20 2013] XMMSAS bgd. selection expression = annulus(35404.005310, 20744.400436, 1087.500000, 2175.000000, X, Y)
[Tue Jun 11 13:18:20 2013] Writing fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src3.gif
[Tue Jun 11 13:21:29 2013] Mean detx,y = (-8929.80, 6282.88) 
[Tue Jun 11 13:21:30 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 13:21:50 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 13:21:50 2013] Setting source spectrum file to fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 11 13:21:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 11 13:30:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 11 13:30:28 2013] rmf not generated due to insufficient counts
[Tue Jun 11 13:55:37 2013] Updating aperture counts using extracted products
[Tue Jun 11 13:55:37 2013] Total counts from fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 152.00
[Tue Jun 11 13:55:37 2013] Total counts from fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 554.00
[Tue Jun 11 13:55:37 2013] Got source and background scale factors 1082770.000000, 10378125.000000
[Tue Jun 11 13:55:38 2013] User source parameters:
  Position = (407.5, 239.0) = 14 15 15.71 11 23 46.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 94.2 +/- 13.4
  Background aperture counts = 57.8
  Rate = 0.003 +/- 0.0005

[Tue Jun 11 13:55:38 2013] Updating counts from extracted products
[Tue Jun 11 13:55:38 2013] Set source signif. to 94.20/7.60 = 12.39
[Tue Jun 11 13:55:40 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 13:55:40 2013] Using photon index=1.80, rate=0.00321, arf fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src3.arf
[Tue Jun 11 13:55:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 13:55:40 2013] Updating source flux to 1e-13
[Tue Jun 11 13:55:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 13:55:48 2013] xmm0112251301/analysis//spectral/fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete