[Tue Jun 11 08:51:33 2013] Detection parameters:
  Position = (354.3, 351.0) = 14 15 31.45 11 31 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1125.7 +/- 44.6
  Background counts = 11.4
  Rate = 0.05 +/- 0.002

[Tue Jun 11 08:51:34 2013] Off-axis axis estimate = 5.56'
[Tue Jun 11 09:44:12 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 09:44:12 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Tue Jun 11 09:44:12 2013] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.876
[Tue Jun 11 09:44:12 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.21"
[Tue Jun 11 10:15:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 11 10:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src1.csv
[Tue Jun 11 10:15:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 11 10:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src1.csv
[Tue Jun 11 10:15:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 10:15:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 11 10:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jun 11 10:15:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 11 10:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jun 11 10:15:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 10:51:24 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.849418 pixels away
[Tue Jun 11 10:51:24 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 10:51:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 10:51:24 2013] Assessing source extent using major
[Tue Jun 11 10:51:24 2013] Source does appear to be extended
[Tue Jun 11 10:51:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 11:39:30 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 11:39:30 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Tue Jun 11 11:39:30 2013] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.876
[Tue Jun 11 11:39:30 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.21"
[Tue Jun 11 12:07:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 11 12:07:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src1.csv
[Tue Jun 11 12:07:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 11 12:07:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src1.csv
[Tue Jun 11 12:07:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 12:07:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 11 12:07:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 11 12:07:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 11 12:07:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 11 12:07:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 12:38:50 2013] Spatial fit model total counts = 912.724000, observed total counts = 1015.000000
[Tue Jun 11 12:38:50 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 11 12:38:50 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 12:38:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 12:38:50 2013] Assessing source extent using major
[Tue Jun 11 12:38:50 2013] Source does appear to be extended
[Tue Jun 11 12:38:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 13:18:20 2013] Counts = 1125.731079, rescaling region sizes by 2.000000
[Tue Jun 11 13:18:20 2013] XMMSAS src. selection expression = ellipse(30773.259857, 30484.514801, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun 11 13:18:20 2013] Writing source region out to fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src2_src.reg
[Tue Jun 11 13:18:20 2013] Extracting stamp from image fullrun_mos1_xmm0112251301_pi300-10000_cl_sm2.00.img.gz, (279, 276) - (429, 426)
[Tue Jun 11 13:18:20 2013] XMMSAS bgd. selection expression = annulus(30773.259857, 30484.514801, 4350.000000, 8700.000000, X, Y) && !ellipse(28233.588928, 21022.882477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33048.949188, 37385.835999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30871.427000, 24895.007800, 357.862410, 357.862410, 0.000000, X, Y) && !ellipse(30619.764600, 26865.040000, 452.248813, 294.209608, 5.639836, X, Y) && !ellipse(23395.239140, 39219.669100, 773.287222, 415.650412, 350.320682, X, Y) && !ellipse(23003.290070, 32395.482758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26423.169000, 27938.659400, 478.436814, 291.372008, 301.652378, X, Y) && !ellipse(32407.598840, 28392.642200, 335.203210, 242.724807, 44.003679, X, Y) && !ellipse(23234.840485, 24434.441132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32873.510162, 30563.135529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36309.436676, 30800.455322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28718.977000, 27488.158000, 592.227217, 279.432008, 259.106376, X, Y) && !ellipse(36487.670300, 37966.161600, 534.127215, 200.874406, 39.216013, X, Y) && !ellipse(28825.597320, 25541.162800, 424.490412, 424.490412, 0.000000, X, Y)
[Tue Jun 11 13:18:20 2013] Writing fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src2.gif
[Tue Jun 11 13:18:22 2013] Mean detx,y = (1733.39, 4553.63) 
[Tue Jun 11 13:18:23 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 13:19:26 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 13:19:26 2013] Setting source spectrum file to fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 11 13:19:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jun 11 13:26:24 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 11 13:26:24 2013] rmf not generated due to insufficient counts
[Tue Jun 11 13:55:36 2013] Updating aperture counts using extracted products
[Tue Jun 11 13:55:36 2013] Total counts from fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 1223.00
[Tue Jun 11 13:55:36 2013] Total counts from fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 8538.00
[Tue Jun 11 13:55:36 2013] Got source and background scale factors 5171912.000000, 161117828.000000
[Tue Jun 11 13:55:36 2013] User source parameters:
  Position = (354.3, 351.0) = 14 15 31.45 11 31 57.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 948.9 +/- 36.0
  Background aperture counts = 274.1
  Rate = 0.03 +/- 0.001

[Tue Jun 11 13:55:36 2013] Updating counts from extracted products
[Tue Jun 11 13:55:36 2013] Set source signif. to 948.93/16.56 = 57.32
[Tue Jun 11 13:55:40 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 13:55:40 2013] Using photon index=1.80, rate=0.0323, arf fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src2.arf
[Tue Jun 11 13:55:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 13:55:40 2013] Updating source flux to 3.1e-13
[Tue Jun 11 13:55:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 13:55:48 2013] xmm0112251301/analysis//spectral/fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete