[Tue Jun 11 08:51:33 2013] Detection parameters:
  Position = (325.1, 242.2) = 14 15 40.10 11 24 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 272.8 +/- 23.5
  Background counts = 8.2
  Rate = 0.009 +/- 0.0008

[Tue Jun 11 08:51:34 2013] Off-axis axis estimate = 4.51'
[Tue Jun 11 09:44:12 2013] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 09:44:12 2013] Initial guess for spatial extent in simple fitting = 8.68"
[Tue Jun 11 09:44:12 2013] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.722
[Tue Jun 11 09:44:12 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.68"
[Tue Jun 11 10:15:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 11 10:15:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 11 10:15:25 2013] Fit fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_src2 appears to have run properly
[Tue Jun 11 10:15:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 11 10:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 11 10:15:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 11 10:15:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 11 10:15:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112251301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 10:51:24 2013] Source 1 is offset by -0.114751 and -1.614880 pixels which is larger than
2 X fitted extent = 3.573747 x 1.540579, not incorporating fit results
[Tue Jun 11 10:51:24 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 10:51:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 10:51:24 2013] Assessing source extent using major
[Tue Jun 11 10:51:24 2013] Source does appear to be extended
[Tue Jun 11 10:51:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 11:39:30 2013] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 11:39:30 2013] Initial guess for spatial extent in simple fitting = 8.68"
[Tue Jun 11 11:39:30 2013] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.722
[Tue Jun 11 11:39:30 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.68"
[Tue Jun 11 12:07:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jun 11 12:07:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jun 11 12:07:25 2013] Fit fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue Jun 11 12:07:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun 11 12:07:25 2013] fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun 11 12:07:25 2013] Fit fullrun_mos1_xmm0112251301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jun 11 12:38:50 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.818089 pixels away
[Tue Jun 11 12:38:50 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 12:38:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 12:38:50 2013] Assessing source extent using major
[Tue Jun 11 12:38:50 2013] Source does appear to be extended
[Tue Jun 11 12:38:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 13:18:20 2013] XMMSAS src. selection expression = ellipse(28233.588928, 21022.882477, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 11 13:18:20 2013] Writing source region out to fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 11 13:18:20 2013] Extracting stamp from image fullrun_mos1_xmm0112251301_pi300-10000_cl_sm2.00.img.gz, (288, 205) - (363, 280)
[Tue Jun 11 13:18:20 2013] XMMSAS bgd. selection expression = annulus(28233.588928, 21022.882477, 1087.500000, 2175.000000, X, Y)
[Tue Jun 11 13:18:20 2013] Writing fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src1.gif
[Tue Jun 11 13:19:29 2013] Mean detx,y = (-6640.66, -421.67) 
[Tue Jun 11 13:19:30 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 13:19:44 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 13:19:44 2013] Setting source spectrum file to fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 11 13:19:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 11 13:26:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 11 13:26:34 2013] rmf not generated due to insufficient counts
[Tue Jun 11 13:55:36 2013] Updating aperture counts using extracted products
[Tue Jun 11 13:55:36 2013] Total counts from fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 273.00
[Tue Jun 11 13:55:36 2013] Total counts from fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 547.00
[Tue Jun 11 13:55:36 2013] Got source and background scale factors 1157702.000000, 10587424.000000
[Tue Jun 11 13:55:36 2013] User source parameters:
  Position = (325.1, 242.2) = 14 15 40.10 11 24 5.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 213.2 +/- 17.5
  Background aperture counts = 59.8
  Rate = 0.007 +/- 0.0006

[Tue Jun 11 13:55:36 2013] Updating counts from extracted products
[Tue Jun 11 13:55:36 2013] Set source signif. to 213.19/7.73 = 27.57
[Tue Jun 11 13:55:40 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 13:55:40 2013] Using photon index=1.80, rate=0.00726, arf fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src1.arf
[Tue Jun 11 13:55:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 13:55:40 2013] Updating source flux to 1.3e-13
[Tue Jun 11 13:55:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 13:55:48 2013] xmm0112251301/analysis//spectral/fullrun_mos1_xmm0112251301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete