[Tue May 22 10:19:57 2012] Detection parameters:
  Position = (353.4, 353.2) = 14 15 31.48 11 31 55.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1983.1 +/- 52.9
  Background counts = 32.4
  Rate = 0.1 +/- 0.004

[Tue May 22 10:19:59 2012] Off-axis axis estimate = 5.63'
[Tue May 22 10:23:13 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Tue May 22 10:23:13 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Tue May 22 10:23:13 2012] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.762
[Tue May 22 10:23:13 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.24"
[Tue May 22 11:55:09 2012] fullrun_pn_xmm0112250301_pi300-10000_cl_pass0_src3.ximg exists
[Tue May 22 11:55:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112250301_pi300-10000_cl_pass0_src3.csv
[Tue May 22 11:55:09 2012] fullrun_pn_xmm0112250301_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May 22 11:55:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112250301_pi300-10000_cl_pass0_src3.csv
[Tue May 22 11:55:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112250301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112250301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 11:55:09 2012] fullrun_pn_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May 22 11:55:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue May 22 11:55:09 2012] fullrun_pn_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May 22 11:55:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue May 22 11:55:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 14:10:16 2012] Spatial fit model total counts = 2383.110000, observed total counts = 1952.000000
[Tue May 22 14:10:16 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 22 14:10:16 2012] Spatial fit model total counts = 1524.660000, observed total counts = 1807.000000
[Tue May 22 14:10:16 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 22 14:10:16 2012] Vigneting correction estimate = 1.000000
[Tue May 22 14:10:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 14:10:16 2012] Assessing source extent using major
[Tue May 22 14:10:16 2012] Source does appear to be extended
[Tue May 22 14:10:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 14:10:54 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Tue May 22 14:10:54 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Tue May 22 14:10:54 2012] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.762
[Tue May 22 14:10:54 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.24"
[Tue May 22 15:35:41 2012] fullrun_pn_xmm0112250301_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 22 15:35:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112250301_pi300-10000_cl_pass1_src3.csv
[Tue May 22 15:35:41 2012] fullrun_pn_xmm0112250301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 22 15:35:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112250301_pi300-10000_cl_pass1_src3.csv
[Tue May 22 15:35:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112250301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112250301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 15:35:41 2012] fullrun_pn_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 22 15:35:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue May 22 15:35:41 2012] fullrun_pn_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 22 15:35:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue May 22 15:35:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 17:35:29 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.327011 pixels away
[Tue May 22 17:35:30 2012] Spatial fit model total counts = 2198.000000, observed total counts = 1807.000000
[Tue May 22 17:35:30 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 22 17:35:30 2012] Vigneting correction estimate = 1.000000
[Tue May 22 17:35:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 17:35:30 2012] Assessing source extent using major
[Tue May 22 17:35:30 2012] Source does appear to be extended
[Tue May 22 17:35:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 17:36:08 2012] Counts = 1983.066895, rescaling region sizes by 2.000000
[Tue May 22 17:36:08 2012] XMMSAS src. selection expression = ellipse(30693.327545, 30683.655273, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May 22 17:36:08 2012] Writing source region out to fullrun_pn_xmm0112250301_pi300-10000_pass1_cl_src3_src.reg
[Tue May 22 17:36:08 2012] Extracting stamp from image fullrun_pn_xmm0112250301_pi300-10000_cl_sm2.00.img.gz, (278, 278) - (428, 428)
[Tue May 22 17:36:08 2012] XMMSAS bgd. selection expression = annulus(30693.327545, 30683.655273, 4350.000000, 8700.000000, X, Y) && !ellipse(32977.231537, 37425.940216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23318.954468, 39266.820709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27824.764862, 34169.530853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36188.877400, 30751.416400, 510.813615, 510.813615, 0.000000, X, Y) && !ellipse(35434.041656, 29529.354736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32306.730438, 28415.708008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26330.468460, 27942.058400, 369.331211, 369.331211, 0.000000, X, Y) && !ellipse(23144.011932, 24412.861053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36346.142000, 38018.402200, 346.346410, 346.346410, 0.000000, X, Y) && !ellipse(32610.375519, 36761.912079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25770.854400, 33919.269800, 420.368012, 420.368012, 0.000000, X, Y) && !ellipse(29578.886963, 32662.533569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22929.421844, 32430.791992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32842.364014, 30515.759186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31151.898895, 30125.145966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28628.322754, 27541.197113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33833.816800, 25907.223400, 321.177609, 321.177609, 0.000000, X, Y) && !ellipse(28751.634300, 25582.083800, 288.239208, 288.239208, 0.000000, X, Y) && !ellipse(24790.090271, 24689.645203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25135.522545, 22131.799828, 493.814690, 239.096051, 347.224398, X, Y)
[Tue May 22 17:36:08 2012] Writing fullrun_pn_xmm0112250301_pi300-10000_pass1_cl_src3.gif
[Tue May 22 17:37:41 2012] Mean detx,y = (4975.29, -1413.06) 
[Tue May 22 17:37:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 17:41:19 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 17:41:20 2012] Setting source spectrum file to fullrun_pn_xmm0112250301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 22 17:41:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112250301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May 22 18:17:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 22 18:17:48 2012] rmf not generated due to insufficient counts
[Tue May 22 19:20:54 2012] Updating aperture counts using extracted products
[Tue May 22 19:20:54 2012] Error reading totcts from fullrun_pn_xmm0112250301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 22 19:20:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 19:20:57 2012] Using photon index=1.80, rate=0.132, arf fullrun_pn_xmm0112250301_pi300-10000_pass1_cl_src3.arf
[Tue May 22 19:20:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 19:20:57 2012] Updating source flux to 4.2e-13
[Tue May 22 19:21:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting