[Tue May 22 10:21:20 2012] Detection parameters:
  Position = (473.1, 411.0) = 14 14 56.04 11 36 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.9 +/- 9.2
  Background counts = 6.1
  Rate = 0.002 +/- 0.0004

[Tue May 22 10:21:21 2012] Off-axis axis estimate = 15.06'
[Tue May 22 13:04:44 2012] Using EEF radius (= 13.96 ")to estimate initial spatial extent for simple fitting
[Tue May 22 13:04:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 22 13:04:44 2012] Initial guess for spatial extent in simple fitting = 13.96"
[Tue May 22 13:04:44 2012] source mask rpix=3.2, npix_max = 55, mask sum = 61, frac = 1.108
[Tue May 22 13:04:44 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 13.96"
[Tue May 22 14:10:03 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src24.ximg exists
[Tue May 22 14:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src24.csv
[Tue May 22 14:10:03 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue May 22 14:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src24.csv
[Tue May 22 14:10:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 14:10:04 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue May 22 14:10:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Tue May 22 14:10:04 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue May 22 14:10:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Tue May 22 14:10:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 14:10:33 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 18.232652 pixels away
[Tue May 22 14:10:33 2012] Vigneting correction estimate = 1.000000
[Tue May 22 14:10:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 14:10:33 2012] Assessing source extent using major
[Tue May 22 14:10:33 2012] Source does appear to be extended
[Tue May 22 14:10:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 16:38:51 2012] Using EEF radius (= 13.96 ")to estimate initial spatial extent for simple fitting
[Tue May 22 16:38:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 22 16:38:51 2012] Initial guess for spatial extent in simple fitting = 13.96"
[Tue May 22 16:38:51 2012] source mask rpix=3.2, npix_max = 55, mask sum = 61, frac = 1.108
[Tue May 22 16:38:51 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 13.96"
[Tue May 22 17:35:16 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src24.ximg exists
[Tue May 22 17:35:16 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue May 22 17:35:16 2012] Fit fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src24 appears to have run properly
[Tue May 22 17:35:16 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue May 22 17:35:17 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue May 22 17:35:17 2012] Fit fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Tue May 22 17:35:47 2012] Spatial fit model total counts = 133.780000, observed total counts = 123.000000
[Tue May 22 17:35:47 2012] Offset between fit and detection position for source 8 = 1.037951 pixels
[Tue May 22 17:35:47 2012] 132.228200 total counts/ 96.375500 bgd. counts: snr = 3.652065
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.037951 pixels
  Position = (472.9, 410.0) = 14 14 56.08 11 36 6.3
  Extent = 12.1 (8.4-16.6)", rotation angle = 63 (53-72) degrees
  Source counts = 35.9 +/- 11.5
  Background counts = 96.4
  Rate = 0.001 +/- 0.0004
[Tue May 22 17:35:47 2012] Vigneting correction estimate = 1.000000
[Tue May 22 17:35:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 17:35:47 2012] Assessing source extent using major axis lower bound
[Tue May 22 17:35:47 2012] Source does appear to be extended
[Tue May 22 17:35:47 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.60
[Tue May 22 17:35:47 2012] Source is asymmetric
[Tue May 22 19:01:09 2012] XMMSAS src. selection expression = ellipse(41096.515600, 35621.609200, 728.172021, 209.406006, 63.410480, X, Y)
[Tue May 22 19:01:09 2012] Writing source region out to fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src8_src.reg
[Tue May 22 19:01:09 2012] Extracting stamp from image fullrun_mos2_xmm0112250301_pi300-10000_cl_sm2.00.img.gz, (431, 368) - (515, 452)
[Tue May 22 19:01:09 2012] XMMSAS bgd. selection expression = annulus(41096.515600, 35621.609200, 1213.620035, 2427.240070, X, Y)
[Tue May 22 19:01:09 2012] Writing fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src8.gif
[Tue May 22 19:11:49 2012] Mean detx,y = (-16307.60, 2670.98) 
[Tue May 22 19:11:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 19:12:12 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 19:12:12 2012] Setting source spectrum file to fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue May 22 19:12:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue May 22 19:18:57 2012] Not generating rmf since there are only 35 counts
[Tue May 22 19:18:57 2012] rmf not generated due to insufficient counts
[Tue May 22 19:21:03 2012] Updating aperture counts using extracted products
[Tue May 22 19:21:03 2012] Error reading totcts from fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue May 22 19:21:05 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 19:21:05 2012] Using photon index=1.80, rate=0.00139, arf fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src8.arf
[Tue May 22 19:21:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 19:21:05 2012] Updating source flux to 4.4e-14
[Tue May 22 19:21:24 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 22 19:21:25 2012] xmm0112250301/analysis//spectral/fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete