[Tue May 22 10:21:20 2012] Detection parameters:
  Position = (268.5, 451.2) = 14 15 56.62 11 39 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.8 +/- 14.0
  Background counts = 8.0
  Rate = 0.005 +/- 0.0005

[Tue May 22 10:21:21 2012] Off-axis axis estimate = 11.29'
[Tue May 22 13:04:44 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Tue May 22 13:04:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 22 13:04:44 2012] Initial guess for spatial extent in simple fitting = 12.07"
[Tue May 22 13:04:44 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.979
[Tue May 22 13:04:44 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.07"
[Tue May 22 14:10:03 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src5.ximg exists
[Tue May 22 14:10:03 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May 22 14:10:03 2012] Fit fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src5 appears to have run properly
[Tue May 22 14:10:03 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May 22 14:10:03 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May 22 14:10:03 2012] Fit fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue May 22 14:10:33 2012] Spatial fit model total counts = 202.076000, observed total counts = 196.000000
[Tue May 22 14:10:33 2012] Offset between fit and detection position for source 6 = 0.340864 pixels
[Tue May 22 14:10:33 2012] 200.125900 total counts/ 103.396000 bgd. counts: snr = 9.512811
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.340864 pixels
  Position = (268.1, 451.2) = 14 15 56.72 11 39 5.7
  Extent = 8.6" x 3.9", rotation angle = 348
  Source counts = 96.7 +/- 14.1
  Background counts = 103.4
  Rate = 0.004 +/- 0.0006
[Tue May 22 14:10:33 2012] Vigneting correction estimate = 1.000000
[Tue May 22 14:10:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 14:10:33 2012] Assessing source extent using major
[Tue May 22 14:10:33 2012] Source does appear to be extended
[Tue May 22 14:10:33 2012] Computing asymmetry using major and minor axis, asym = 2.19
[Tue May 22 14:10:33 2012] Source is asymmetric
[Tue May 22 16:38:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 22 16:38:51 2012] Initial guess for spatial extent in simple fitting = 6.23"
[Tue May 22 16:38:51 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.072
[Tue May 22 16:38:51 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.23"
[Tue May 22 17:35:16 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src5.ximg exists
[Tue May 22 17:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src5.csv
[Tue May 22 17:35:16 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue May 22 17:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src5.csv
[Tue May 22 17:35:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 17:35:16 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue May 22 17:35:16 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue May 22 17:35:16 2012] Fit fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue May 22 17:35:47 2012] Spatial fit model total counts = 192.863000, observed total counts = 188.000000
[Tue May 22 17:35:47 2012] Offset between fit and detection position for source 6 = 0.296351 pixels
[Tue May 22 17:35:47 2012] 191.110100 total counts/ 101.969000 bgd. counts: snr = 8.827626
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.296351 pixels
  Position = (268.4, 451.3) = 14 15 56.64 11 39 6.3
  Extent = 5.5 (4.6-6.7)", rotation angle = 0
  Source counts = 89.1 +/- 13.8
  Background counts = 102.0
  Rate = 0.003 +/- 0.0005
[Tue May 22 17:35:47 2012] Vigneting correction estimate = 1.000000
[Tue May 22 17:35:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 17:35:47 2012] Assessing source extent using major axis lower bound
[Tue May 22 17:35:47 2012] Source does appear to be extended
[Tue May 22 17:35:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 19:01:08 2012] XMMSAS src. selection expression = ellipse(23300.558200, 39215.929800, 327.188409, 327.188409, 0.000000, X, Y)
[Tue May 22 19:01:08 2012] Writing source region out to fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src6_src.reg
[Tue May 22 19:01:08 2012] Extracting stamp from image fullrun_mos2_xmm0112250301_pi300-10000_cl_sm2.00.img.gz, (250, 433) - (287, 470)
[Tue May 22 19:01:08 2012] XMMSAS bgd. selection expression = annulus(23300.558200, 39215.929800, 545.314016, 1090.628031, X, Y)
[Tue May 22 19:01:08 2012] Writing fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src6.gif
[Tue May 22 19:03:23 2012] Mean detx,y = (-592.38, 11797.11) 
[Tue May 22 19:03:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 19:03:46 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 19:03:47 2012] Setting source spectrum file to fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue May 22 19:03:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue May 22 19:15:56 2012] Not generating rmf since there are only 89 counts
[Tue May 22 19:15:56 2012] rmf not generated due to insufficient counts
[Tue May 22 19:21:02 2012] Updating aperture counts using extracted products
[Tue May 22 19:21:02 2012] Error reading totcts from fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue May 22 19:21:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 19:21:04 2012] Using photon index=1.80, rate=0.00347, arf fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src6.arf
[Tue May 22 19:21:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 19:21:04 2012] Updating source flux to 9.6e-14
[Tue May 22 19:21:24 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 22 19:21:25 2012] xmm0112250301/analysis//spectral/fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete