[Tue May 22 10:21:20 2012] Detection parameters:
  Position = (406.3, 238.8) = 14 15 15.82 11 23 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.5 +/- 10.7
  Background counts = 8.2
  Rate = 0.004 +/- 0.0007

[Tue May 22 10:21:21 2012] Off-axis axis estimate = 8.94'
[Tue May 22 13:04:44 2012] Using EEF radius (= 10.90 ")to estimate initial spatial extent for simple fitting
[Tue May 22 13:04:44 2012] Initial guess for spatial extent in simple fitting = 10.90"
[Tue May 22 13:04:44 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.996
[Tue May 22 13:04:44 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.90"
[Tue May 22 14:10:03 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src11.ximg exists
[Tue May 22 14:10:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src11.csv
[Tue May 22 14:10:03 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue May 22 14:10:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src11.csv
[Tue May 22 14:10:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 14:10:04 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue May 22 14:10:04 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue May 22 14:10:04 2012] Fit fullrun_mos2_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue May 22 14:10:33 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 15.272496 pixels away
[Tue May 22 14:10:33 2012] Vigneting correction estimate = 1.000000
[Tue May 22 14:10:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 14:10:33 2012] Assessing source extent using major
[Tue May 22 14:10:33 2012] Source does appear to be extended
[Tue May 22 14:10:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 16:38:51 2012] Using EEF radius (= 10.90 ")to estimate initial spatial extent for simple fitting
[Tue May 22 16:38:51 2012] Initial guess for spatial extent in simple fitting = 10.90"
[Tue May 22 16:38:51 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.996
[Tue May 22 16:38:51 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.90"
[Tue May 22 17:35:16 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src11.ximg exists
[Tue May 22 17:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src11.csv
[Tue May 22 17:35:16 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue May 22 17:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src11.csv
[Tue May 22 17:35:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 17:35:16 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue May 22 17:35:16 2012] fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue May 22 17:35:16 2012] Fit fullrun_mos2_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue May 22 17:35:47 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 14.910725 pixels away
[Tue May 22 17:35:47 2012] Vigneting correction estimate = 1.000000
[Tue May 22 17:35:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 17:35:47 2012] Assessing source extent using major
[Tue May 22 17:35:47 2012] Source does appear to be extended
[Tue May 22 17:35:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 19:01:08 2012] XMMSAS src. selection expression = ellipse(35303.589447, 20725.237762, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 22 19:01:08 2012] Writing source region out to fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src18_src.reg
[Tue May 22 19:01:08 2012] Extracting stamp from image fullrun_mos2_xmm0112250301_pi300-10000_cl_sm2.00.img.gz, (369, 201) - (444, 276)
[Tue May 22 19:01:08 2012] XMMSAS bgd. selection expression = annulus(35303.589447, 20725.237762, 1087.500000, 2175.000000, X, Y) && !ellipse(35986.298370, 18967.544647, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 22 19:01:08 2012] Writing fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src18.gif
[Tue May 22 19:06:23 2012] Mean detx,y = (-6011.39, -9578.32) 
[Tue May 22 19:06:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 19:06:41 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 19:06:41 2012] Setting source spectrum file to fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue May 22 19:06:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue May 22 19:16:48 2012] Not generating rmf since there are only 68 counts
[Tue May 22 19:16:48 2012] rmf not generated due to insufficient counts
[Tue May 22 19:21:03 2012] Updating aperture counts using extracted products
[Tue May 22 19:21:03 2012] Error reading totcts from fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue May 22 19:21:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 19:21:04 2012] Using photon index=1.80, rate=0.00444, arf fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src18.arf
[Tue May 22 19:21:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 19:21:04 2012] Updating source flux to 7.5e-14
[Tue May 22 19:21:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 22 19:21:25 2012] xmm0112250301/analysis//spectral/fullrun_mos2_xmm0112250301_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete