[Tue May 22 10:20:31 2012] Detection parameters:
  Position = (186.6, 434.8) = 14 16 20.85 11 37 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.4 +/- 8.8
  Background counts = 6.8
  Rate = 0.002 +/- 0.0003

[Tue May 22 10:20:33 2012] Off-axis axis estimate = 12.79'
[Tue May 22 11:55:10 2012] Using EEF radius (= 12.82 ")to estimate initial spatial extent for simple fitting
[Tue May 22 11:55:10 2012] Initial guess for spatial extent in simple fitting = 12.82"
[Tue May 22 11:55:10 2012] source mask rpix=2.9, npix_max = 47, mask sum = 38, frac = 0.799
[Tue May 22 11:55:10 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 12.82"
[Tue May 22 13:04:44 2012] fullrun_mos1_xmm0112250301_pi300-10000_cl_pass0_src26.ximg exists
[Tue May 22 13:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112250301_pi300-10000_cl_pass0_src26.csv
[Tue May 22 13:04:44 2012] fullrun_mos1_xmm0112250301_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue May 22 13:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112250301_pi300-10000_cl_pass0_src26.csv
[Tue May 22 13:04:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112250301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112250301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 13:04:44 2012] fullrun_mos1_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue May 22 13:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue May 22 13:04:44 2012] fullrun_mos1_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue May 22 13:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue May 22 13:04:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112250301_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 14:10:24 2012] Spatial fit model total counts = 133.655000, observed total counts = 112.000000
[Tue May 22 14:10:24 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 22 14:10:24 2012] Vigneting correction estimate = 1.000000
[Tue May 22 14:10:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 14:10:24 2012] Assessing source extent using major
[Tue May 22 14:10:24 2012] Source does appear to be extended
[Tue May 22 14:10:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 15:35:42 2012] Using EEF radius (= 12.82 ")to estimate initial spatial extent for simple fitting
[Tue May 22 15:35:42 2012] Initial guess for spatial extent in simple fitting = 12.82"
[Tue May 22 15:35:42 2012] source mask rpix=2.9, npix_max = 47, mask sum = 38, frac = 0.799
[Tue May 22 15:35:42 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 12.82"
[Tue May 22 16:38:50 2012] fullrun_mos1_xmm0112250301_pi300-10000_cl_pass1_src25.ximg exists
[Tue May 22 16:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112250301_pi300-10000_cl_pass1_src25.csv
[Tue May 22 16:38:50 2012] fullrun_mos1_xmm0112250301_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue May 22 16:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112250301_pi300-10000_cl_pass1_src25.csv
[Tue May 22 16:38:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112250301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112250301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 16:38:50 2012] fullrun_mos1_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue May 22 16:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue May 22 16:38:50 2012] fullrun_mos1_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue May 22 16:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue May 22 16:38:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112250301_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 17:35:37 2012] Spatial fit model total counts = 129.170000, observed total counts = 112.000000
[Tue May 22 17:35:37 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 22 17:35:37 2012] Vigneting correction estimate = 1.000000
[Tue May 22 17:35:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 17:35:37 2012] Assessing source extent using major
[Tue May 22 17:35:37 2012] Source does appear to be extended
[Tue May 22 17:35:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 18:38:11 2012] XMMSAS src. selection expression = ellipse(16185.922226, 37780.622925, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 22 18:38:11 2012] Writing source region out to fullrun_mos1_xmm0112250301_pi300-10000_pass1_cl_src11_src.reg
[Tue May 22 18:38:11 2012] Extracting stamp from image fullrun_mos1_xmm0112250301_pi300-10000_cl_sm2.00.img.gz, (149, 397) - (224, 472)
[Tue May 22 18:38:11 2012] XMMSAS bgd. selection expression = annulus(16185.922226, 37780.622925, 1087.500000, 2175.000000, X, Y) && !ellipse(18556.226181, 35774.010193, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 22 18:38:11 2012] Writing fullrun_mos1_xmm0112250301_pi300-10000_pass1_cl_src11.gif
[Tue May 22 18:49:37 2012] Mean detx,y = (12917.22, -6640.81) 
[Tue May 22 18:49:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 18:50:15 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 18:50:15 2012] Setting source spectrum file to fullrun_mos1_xmm0112250301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue May 22 18:50:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112250301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue May 22 19:00:02 2012] Not generating rmf since there are only 47 counts
[Tue May 22 19:00:02 2012] rmf not generated due to insufficient counts
[Tue May 22 19:21:00 2012] Updating aperture counts using extracted products
[Tue May 22 19:21:00 2012] Error reading totcts from fullrun_mos1_xmm0112250301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue May 22 19:21:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 19:21:02 2012] Using photon index=1.80, rate=0.00184, arf fullrun_mos1_xmm0112250301_pi300-10000_pass1_cl_src11.arf
[Tue May 22 19:21:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 19:21:02 2012] Updating source flux to 6e-14
[Tue May 22 19:21:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting