[Sat Aug 11 15:45:18 2012] Detection parameters:
  Position = (275.7, 437.3) = 13 47 49.82 58 21 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9819.4 +/- 119.8
  Background counts = 49.2
  Rate = 0.5 +/- 0.006

[Sat Aug 11 15:45:19 2012] Off-axis axis estimate = 10.20'
[Sat Aug 11 15:49:51 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 15:49:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 15:49:51 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Sat Aug 11 15:49:51 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.907
[Sat Aug 11 15:49:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.53"
[Sat Aug 11 16:56:54 2012] fullrun_pn_xmm0112250201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 11 16:56:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112250201_pi300-10000_cl_pass0_src1.csv
[Sat Aug 11 16:56:54 2012] fullrun_pn_xmm0112250201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 11 16:56:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112250201_pi300-10000_cl_pass0_src1.csv
[Sat Aug 11 16:56:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112250201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112250201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 16:56:55 2012] fullrun_pn_xmm0112250201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 11 16:56:55 2012] fullrun_pn_xmm0112250201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 11 16:56:55 2012] Fit fullrun_pn_xmm0112250201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug 11 18:07:33 2012] Spatial fit model total counts = 9077.290000, observed total counts = 9075.000000
[Sat Aug 11 18:07:33 2012] Offset between fit and detection position for source 1 = 0.170911 pixels
[Sat Aug 11 18:07:33 2012] 9088.930000 total counts/ 2070.700000 bgd. counts: snr = 154.230052
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.170911 pixels
  Position = (275.6, 437.4) = 13 47 49.89 58 21 9.5
  Extent = 6.5 (6.4-6.6)", rotation angle = 0
  Source counts = 7018.2 +/- 95.3
  Background counts = 2070.7
  Rate = 0.2 +/- 0.003
[Sat Aug 11 18:07:33 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 18:07:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 18:07:33 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 18:07:33 2012] Source does appear to be extended
[Sat Aug 11 18:07:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 18:08:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 18:08:02 2012] Initial guess for spatial extent in simple fitting = 6.48"
[Sat Aug 11 18:08:02 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.010
[Sat Aug 11 18:08:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.48"
[Sat Aug 11 19:17:44 2012] fullrun_pn_xmm0112250201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug 11 19:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112250201_pi300-10000_cl_pass1_src1.csv
[Sat Aug 11 19:17:44 2012] fullrun_pn_xmm0112250201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug 11 19:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112250201_pi300-10000_cl_pass1_src1.csv
[Sat Aug 11 19:17:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112250201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112250201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 19:17:44 2012] fullrun_pn_xmm0112250201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 11 19:17:44 2012] fullrun_pn_xmm0112250201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 11 19:17:44 2012] Fit fullrun_pn_xmm0112250201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug 11 20:19:52 2012] Spatial fit model total counts = 8556.410000, observed total counts = 8545.000000
[Sat Aug 11 20:19:52 2012] Offset between fit and detection position for source 1 = 0.033779 pixels
[Sat Aug 11 20:19:52 2012] 8546.280000 total counts/ 1883.540000 bgd. counts: snr = 153.520170
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.033779 pixels
  Position = (275.6, 437.4) = 13 47 49.89 58 21 9.6
  Extent = 6.0 (5.9-6.1)", rotation angle = 0
  Source counts = 6662.7 +/- 92.4
  Background counts = 1883.5
  Rate = 0.2 +/- 0.003
[Sat Aug 11 20:19:52 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 20:19:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 20:19:52 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 20:19:52 2012] Source does appear to be extended
[Sat Aug 11 20:19:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 20:20:19 2012] Counts = 6662.740000, rescaling region sizes by 2.000000
[Sat Aug 11 20:20:19 2012] XMMSAS src. selection expression = ellipse(23925.415200, 38006.365600, 722.719221, 722.719221, 0.000000, X, Y)
[Sat Aug 11 20:20:19 2012] Writing source region out to fullrun_pn_xmm0112250201_pi300-10000_pass1_cl_src1_src.reg
[Sat Aug 11 20:20:19 2012] Extracting stamp from image fullrun_pn_xmm0112250201_pi300-10000_cl_sm2.00.img.gz, (234, 396) - (317, 479)
[Sat Aug 11 20:20:19 2012] XMMSAS bgd. selection expression = annulus(23925.415200, 38006.365600, 2409.064069, 4818.128139, X, Y) && !ellipse(26732.007904, 38001.749695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19497.122000, 40897.979800, 2111.272061, 2111.272061, 0.000000, X, Y) && !ellipse(25375.910000, 37333.924000, 1824.056052, 1824.056052, 0.000000, X, Y) && !ellipse(26172.820800, 35449.216600, 483.828014, 231.180007, 338.196104, X, Y) && !ellipse(25616.098776, 33477.258200, 411.964012, 411.964012, 0.000000, X, Y) && !ellipse(26145.575653, 42913.437073, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 11 20:20:19 2012] Writing fullrun_pn_xmm0112250201_pi300-10000_pass1_cl_src1.gif
[Sat Aug 11 20:20:30 2012] Mean detx,y = (7072.94, -7675.76) 
[Sat Aug 11 20:20:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 20:21:36 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 20:21:37 2012] Setting source spectrum file to fullrun_pn_xmm0112250201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 11 20:21:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112250201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Aug 11 22:29:45 2012] Updating aperture counts using extracted products
[Sat Aug 11 22:29:46 2012] Error reading totcts from fullrun_pn_xmm0112250201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 11 22:29:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 22:29:48 2012] Using photon index=1.80, rate=0.231, arf fullrun_pn_xmm0112250201_pi300-10000_pass1_cl_src1.arf
[Sat Aug 11 22:29:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 22:29:48 2012] Updating source flux to 1e-12
[Sat Aug 11 22:33:52 2012] Reading fit data from xmm0112250201/analysis//spectral/fullrun_pn_xmm0112250201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Aug 11 22:33:52 2012] Spectral fit parameter nH value = 2.52217e+12
[Sat Aug 11 22:33:52 2012] Spectral fit parameter PhoIndex value = 2.08828
[Sat Aug 11 22:33:52 2012] Failed to get F(0.3-8.0) from xmm0112250201/analysis//spectral/fullrun_pn_xmm0112250201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Aug 11 22:33:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 22:33:52 2012] Using Nh = 2.5e+12, photon index=2.09, rate=0.231, arf fullrun_pn_xmm0112250201_pi300-10000_pass1_cl_src1.arf
[Sat Aug 11 22:33:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 22:33:52 2012] Updating source flux to 8.6e-13