[Sat Aug 11 15:46:37 2012] Detection parameters:
  Position = (291.7, 320.8) = 13 47 40.95 58 12 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1383.5 +/- 45.0
  Background counts = 26.8
  Rate = 0.03 +/- 0.001

[Sat Aug 11 15:46:38 2012] Off-axis axis estimate = 1.70'
[Sat Aug 11 17:27:53 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 17:27:53 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Aug 11 17:27:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Aug 11 17:27:53 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.28"
[Sat Aug 11 18:07:21 2012] fullrun_mos2_xmm0112250201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Aug 11 18:07:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112250201_pi300-10000_cl_pass0_src3.csv
[Sat Aug 11 18:07:21 2012] fullrun_mos2_xmm0112250201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Aug 11 18:07:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112250201_pi300-10000_cl_pass0_src3.csv
[Sat Aug 11 18:07:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112250201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112250201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 18:07:21 2012] fullrun_mos2_xmm0112250201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Aug 11 18:07:21 2012] fullrun_mos2_xmm0112250201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Aug 11 18:07:21 2012] Fit fullrun_mos2_xmm0112250201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Aug 11 18:07:46 2012] Spatial fit model total counts = 1298.370000, observed total counts = 1261.000000
[Sat Aug 11 18:07:46 2012] Offset between fit and detection position for source 5 = 0.200322 pixels
[Sat Aug 11 18:07:46 2012] 1310.935000 total counts/ 427.563000 bgd. counts: snr = 42.721213
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.200322 pixels
  Position = (291.5, 320.7) = 13 47 41.04 58 12 42.1
  Extent = 5.3 (5.0-5.6)", rotation angle = 0
  Source counts = 883.4 +/- 36.2
  Background counts = 427.6
  Rate = 0.03 +/- 0.001
[Sat Aug 11 18:07:46 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 18:07:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 18:07:46 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 18:07:46 2012] Source does appear to be extended
[Sat Aug 11 18:07:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 19:46:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 19:46:29 2012] Initial guess for spatial extent in simple fitting = 5.32"
[Sat Aug 11 19:46:29 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.759
[Sat Aug 11 19:46:29 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.32"
[Sat Aug 11 20:19:43 2012] fullrun_mos2_xmm0112250201_pi300-10000_cl_pass1_src3.ximg exists
[Sat Aug 11 20:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112250201_pi300-10000_cl_pass1_src3.csv
[Sat Aug 11 20:19:43 2012] fullrun_mos2_xmm0112250201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Aug 11 20:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112250201_pi300-10000_cl_pass1_src3.csv
[Sat Aug 11 20:19:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112250201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112250201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 20:19:43 2012] fullrun_mos2_xmm0112250201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Aug 11 20:19:43 2012] fullrun_mos2_xmm0112250201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Aug 11 20:19:43 2012] Fit fullrun_mos2_xmm0112250201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Aug 11 20:20:04 2012] Spatial fit model total counts = 1295.580000, observed total counts = 1255.000000
[Sat Aug 11 20:20:04 2012] Offset between fit and detection position for source 5 = 0.017594 pixels
[Sat Aug 11 20:20:04 2012] 1302.918000 total counts/ 424.646000 bgd. counts: snr = 42.620203
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.017594 pixels
  Position = (291.5, 320.7) = 13 47 41.05 58 12 42.1
  Extent = 5.3 (5.0-5.6)", rotation angle = 0
  Source counts = 878.3 +/- 36.1
  Background counts = 424.6
  Rate = 0.03 +/- 0.001
[Sat Aug 11 20:20:04 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 20:20:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 20:20:04 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 20:20:04 2012] Source does appear to be extended
[Sat Aug 11 20:20:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 21:50:27 2012] XMMSAS src. selection expression = ellipse(25315.464400, 27856.400000, 316.096809, 316.096809, 0.000000, X, Y)
[Sat Aug 11 21:50:27 2012] Writing source region out to fullrun_mos2_xmm0112250201_pi300-10000_pass1_cl_src5_src.reg
[Sat Aug 11 21:50:27 2012] Extracting stamp from image fullrun_mos2_xmm0112250201_pi300-10000_cl_sm2.00.img.gz, (273, 303) - (310, 339)
[Sat Aug 11 21:50:27 2012] XMMSAS bgd. selection expression = annulus(25315.464400, 27856.400000, 526.828015, 1053.656030, X, Y) && !ellipse(23684.493591, 26967.352356, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26330.410000, 28810.750000, 1202.008035, 1202.008035, 0.000000, X, Y)
[Sat Aug 11 21:50:27 2012] Writing fullrun_mos2_xmm0112250201_pi300-10000_pass1_cl_src5.gif
[Sat Aug 11 21:53:33 2012] Mean detx,y = (75.72, 65.68) 
[Sat Aug 11 21:53:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 21:53:44 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 21:53:45 2012] Setting source spectrum file to fullrun_mos2_xmm0112250201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Aug 11 21:53:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112250201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Aug 11 22:29:52 2012] Updating aperture counts using extracted products
[Sat Aug 11 22:29:52 2012] Error reading totcts from fullrun_mos2_xmm0112250201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Aug 11 22:29:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 22:29:54 2012] Using photon index=1.80, rate=0.0252, arf fullrun_mos2_xmm0112250201_pi300-10000_pass1_cl_src5.arf
[Sat Aug 11 22:29:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 22:29:54 2012] Updating source flux to 3.3e-13
[Sat Aug 11 22:31:40 2012] Reading fit data from xmm0112250201/analysis//spectral/fullrun_mos2_xmm0112250201_pi300-10000_pass1_cl_src5_pl.csv
[Sat Aug 11 22:31:40 2012] Spectral fit parameter nH value = 2.01458e+20
[Sat Aug 11 22:31:40 2012] Spectral fit parameter PhoIndex value = 1.99881
[Sat Aug 11 22:31:40 2012] Failed to get F(0.3-8.0) from xmm0112250201/analysis//spectral/fullrun_mos2_xmm0112250201_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Sat Aug 11 22:31:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 22:31:40 2012] Using Nh = 2e+20, photon index=2.00, rate=0.0252, arf fullrun_mos2_xmm0112250201_pi300-10000_pass1_cl_src5.arf
[Sat Aug 11 22:31:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 22:31:40 2012] Updating source flux to 3.1e-13