[Sat Aug 11 15:46:02 2012] Detection parameters:
  Position = (275.5, 437.8) = 13 47 49.90 58 21 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3477.0 +/- 69.2
  Background counts = 24.4
  Rate = 0.1 +/- 0.003

[Sat Aug 11 15:46:04 2012] Off-axis axis estimate = 10.24'
[Sat Aug 11 16:56:55 2012] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 16:56:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 16:56:55 2012] Initial guess for spatial extent in simple fitting = 11.55"
[Sat Aug 11 16:56:55 2012] source mask rpix=2.7, npix_max = 39, mask sum = 34, frac = 0.854
[Sat Aug 11 16:56:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.55"
[Sat Aug 11 17:27:52 2012] fullrun_mos1_xmm0112250201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 11 17:27:52 2012] fullrun_mos1_xmm0112250201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 11 17:27:52 2012] Fit fullrun_mos1_xmm0112250201_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Aug 11 17:27:53 2012] fullrun_mos1_xmm0112250201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 11 17:27:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112250201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Aug 11 17:27:53 2012] fullrun_mos1_xmm0112250201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 11 17:27:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112250201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Aug 11 17:27:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112250201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112250201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 18:07:40 2012] Spatial fit model total counts = 3565.290000, observed total counts = 3289.000000
[Sat Aug 11 18:07:40 2012] Offset between fit and detection position for source 4 = 0.286040 pixels
[Sat Aug 11 18:07:40 2012] 3573.968000 total counts/ 813.198000 bgd. counts: snr = 96.812643
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.286040 pixels
  Position = (275.6, 437.6) = 13 47 49.88 58 21 10.2
  Extent = 6.9" x 5.3", rotation angle = 350
  Source counts = 2760.8 +/- 59.8
  Background counts = 813.2
  Rate = 0.08 +/- 0.002
[Sat Aug 11 18:07:40 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 18:07:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 18:07:40 2012] Assessing source extent using major
[Sat Aug 11 18:07:40 2012] Source does appear to be extended
[Sat Aug 11 18:07:40 2012] Computing asymmetry using major and minor axis, asym = 1.30
[Sat Aug 11 19:17:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 19:17:45 2012] Initial guess for spatial extent in simple fitting = 6.13"
[Sat Aug 11 19:17:45 2012] source mask rpix=1.4, npix_max = 14, mask sum = 8, frac = 0.549
[Sat Aug 11 19:17:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.13"
[Sat Aug 11 19:46:28 2012] fullrun_mos1_xmm0112250201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug 11 19:46:28 2012] fullrun_mos1_xmm0112250201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug 11 19:46:28 2012] Fit fullrun_mos1_xmm0112250201_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Aug 11 19:46:29 2012] fullrun_mos1_xmm0112250201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 11 19:46:29 2012] fullrun_mos1_xmm0112250201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 11 19:46:29 2012] Fit fullrun_mos1_xmm0112250201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug 11 20:19:59 2012] Spatial fit model total counts = 3204.660000, observed total counts = 3070.000000
[Sat Aug 11 20:19:59 2012] Offset between fit and detection position for source 4 = 0.030963 pixels
[Sat Aug 11 20:19:59 2012] 3223.260000 total counts/ 661.510000 bgd. counts: snr = 99.602110
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.030963 pixels
  Position = (275.6, 437.6) = 13 47 49.90 58 21 10.2
  Extent = 6.6" x 5.1", rotation angle = 352
  Source counts = 2561.8 +/- 56.8
  Background counts = 661.5
  Rate = 0.07 +/- 0.002
[Sat Aug 11 20:19:59 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 20:19:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 20:19:59 2012] Assessing source extent using major
[Sat Aug 11 20:19:59 2012] Source does appear to be extended
[Sat Aug 11 20:19:59 2012] Computing asymmetry using major and minor axis, asym = 1.30
[Sat Aug 11 21:27:34 2012] Counts = 2561.750000, rescaling region sizes by 2.000000
[Sat Aug 11 21:27:34 2012] XMMSAS src. selection expression = ellipse(23924.961800, 38018.415600, 793.735223, 608.372418, 352.318052, X, Y)
[Sat Aug 11 21:27:34 2012] Writing source region out to fullrun_mos1_xmm0112250201_pi300-10000_pass1_cl_src4_src.reg
[Sat Aug 11 21:27:34 2012] Extracting stamp from image fullrun_mos1_xmm0112250201_pi300-10000_cl_sm2.00.img.gz, (230, 392) - (321, 483)
[Sat Aug 11 21:27:34 2012] XMMSAS bgd. selection expression = annulus(23924.961800, 38018.415600, 2645.784076, 5291.568152, X, Y) && !ellipse(26751.973724, 37886.943573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20229.377853, 32659.103271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.259338, 37869.892975, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 11 21:27:34 2012] Writing fullrun_mos1_xmm0112250201_pi300-10000_pass1_cl_src4.gif
[Sat Aug 11 21:27:41 2012] Mean detx,y = (7779.55, 6772.28) 
[Sat Aug 11 21:27:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 21:29:05 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 21:29:05 2012] Setting source spectrum file to fullrun_mos1_xmm0112250201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Aug 11 21:29:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112250201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Aug 11 22:29:49 2012] Updating aperture counts using extracted products
[Sat Aug 11 22:29:49 2012] Error reading totcts from fullrun_mos1_xmm0112250201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Aug 11 22:29:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 22:29:50 2012] Using photon index=1.80, rate=0.074, arf fullrun_mos1_xmm0112250201_pi300-10000_pass1_cl_src4.arf
[Sat Aug 11 22:29:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 22:29:50 2012] Updating source flux to 1.2e-12
[Sat Aug 11 22:30:42 2012] Reading fit data from xmm0112250201/analysis//spectral/fullrun_mos1_xmm0112250201_pi300-10000_pass1_cl_src4_pl.csv
[Sat Aug 11 22:30:42 2012] Spectral fit parameter nH value = 4.19473e+12
[Sat Aug 11 22:30:42 2012] Spectral fit parameter PhoIndex value = 1.99174
[Sat Aug 11 22:30:42 2012] Failed to get F(0.3-8.0) from xmm0112250201/analysis//spectral/fullrun_mos1_xmm0112250201_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Sat Aug 11 22:30:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 22:30:42 2012] Using Nh = 4.2e+12, photon index=1.99, rate=0.074, arf fullrun_mos1_xmm0112250201_pi300-10000_pass1_cl_src4.arf
[Sat Aug 11 22:30:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 22:30:42 2012] Updating source flux to 1.1e-12