[Mon May 28 21:45:32 2012] Detection parameters:
  Position = (428.5, 270.1) = 15 58 40.71 27 27 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.9 +/- 14.9
  Background counts = 57.7
  Rate = 0.009 +/- 0.002

[Mon May 28 21:45:32 2012] Off-axis axis estimate = 9.65'
[Mon May 28 21:54:01 2012] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Mon May 28 21:54:01 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Mon May 28 21:54:01 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.102
[Mon May 28 21:54:01 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.25"
[Mon May 28 21:57:19 2012] fullrun_mos1_xmm0112240401_pi300-10000_cl_pass0_src2.ximg exists
[Mon May 28 21:57:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112240401_pi300-10000_cl_pass0_src2.csv
[Mon May 28 21:57:19 2012] fullrun_mos1_xmm0112240401_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon May 28 21:57:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112240401_pi300-10000_cl_pass0_src2.csv
[Mon May 28 21:57:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112240401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112240401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 21:57:19 2012] fullrun_mos1_xmm0112240401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon May 28 21:57:19 2012] fullrun_mos1_xmm0112240401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon May 28 21:57:19 2012] Fit fullrun_mos1_xmm0112240401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon May 28 22:03:33 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.613941 pixels away
[Mon May 28 22:03:33 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:03:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:03:33 2012] Assessing source extent using major
[Mon May 28 22:03:33 2012] Source does appear to be extended
[Mon May 28 22:03:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:09:17 2012] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Mon May 28 22:09:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 22:09:17 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Mon May 28 22:09:17 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.102
[Mon May 28 22:09:17 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.25"
[Mon May 28 22:13:46 2012] fullrun_mos1_xmm0112240401_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 28 22:13:46 2012] fullrun_mos1_xmm0112240401_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 28 22:13:46 2012] Fit fullrun_mos1_xmm0112240401_pi300-10000_cl_pass1_src2 appears to have run properly
[Mon May 28 22:13:46 2012] fullrun_mos1_xmm0112240401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 28 22:13:46 2012] fullrun_mos1_xmm0112240401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 28 22:13:46 2012] Fit fullrun_mos1_xmm0112240401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon May 28 22:20:13 2012] Source 1 is offset by -9.807779 and 0.014320 pixels which is larger than
2 X fitted extent = 1.309896 x 1.309896, not incorporating fit results
[Mon May 28 22:20:13 2012] Vigneting correction estimate = 1.000000
[Mon May 28 22:20:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 22:20:13 2012] Assessing source extent using major
[Mon May 28 22:20:13 2012] Source does appear to be extended
[Mon May 28 22:20:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 22:22:24 2012] XMMSAS src. selection expression = ellipse(37232.245209, 23447.096802, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 22:22:24 2012] Writing source region out to fullrun_mos1_xmm0112240401_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 22:22:24 2012] Extracting stamp from image fullrun_mos1_xmm0112240401_pi300-10000_cl_sm2.00.img.gz, (391, 233) - (466, 308)
[Mon May 28 22:22:24 2012] XMMSAS bgd. selection expression = annulus(37232.245209, 23447.096802, 1087.500000, 2175.000000, X, Y)
[Mon May 28 22:22:24 2012] Writing fullrun_mos1_xmm0112240401_pi300-10000_pass1_cl_src1.gif
[Mon May 28 22:22:37 2012] Mean detx,y = (-6246.73, 9101.19) 
[Mon May 28 22:22:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 22:22:49 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 22:22:49 2012] Setting source spectrum file to fullrun_mos1_xmm0112240401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 22:22:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112240401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 22:26:36 2012] Not generating rmf since there are only 82 counts
[Mon May 28 22:26:36 2012] rmf not generated due to insufficient counts
[Mon May 28 22:31:53 2012] Updating aperture counts using extracted products
[Mon May 28 22:31:53 2012] Error reading totcts from fullrun_mos1_xmm0112240401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 22:31:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:31:53 2012] Using photon index=1.80, rate=0.00932, arf fullrun_mos1_xmm0112240401_pi300-10000_pass1_cl_src1.arf
[Mon May 28 22:31:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:31:53 2012] Updating source flux to 1.5e-13
[Mon May 28 22:31:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting