[Sat May 11 00:40:02 2013] Detection parameters:
  Position = (315.0, 209.4) = 13 30 50.48 -1 58 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.5 +/- 11.2
  Background counts = 37.9
  Rate = 0.002 +/- 0.0004

[Sat May 11 00:40:03 2013] Off-axis axis estimate = 6.56'
[Sat May 11 00:41:08 2013] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sat May 11 00:41:08 2013] Initial guess for spatial extent in simple fitting = 9.71"
[Sat May 11 00:41:08 2013] source mask rpix=2.2, npix_max = 29, mask sum = 29, frac = 0.971
[Sat May 11 00:41:08 2013] Giving source the simple spatial ID 87 for pass 0, mean size = 9.71"
[Sat May 11 00:41:13 2013] fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_src87.ximg exists
[Sat May 11 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_src87.csv
[Sat May 11 00:41:13 2013] fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_src87_1.ximg exists
[Sat May 11 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_src87.csv
[Sat May 11 00:41:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:41:16 2013] fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Sat May 11 00:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src87.csv
[Sat May 11 00:41:16 2013] fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Sat May 11 00:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src87.csv
[Sat May 11 00:41:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:41:57 2013] Spatial fit model total counts = 334.897000, observed total counts = 334.000000
[Sat May 11 00:41:57 2013] Offset between fit and detection position for source 92 = 8.474835 pixels
[Sat May 11 00:41:57 2013] Warning, changing simple spatial fit ID from 87 to 86
[Sat May 11 00:41:57 2013] 302.643020 total counts/ 297.513000 bgd. counts: snr = 0.297417
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 8.474835 pixels
  Position = (314.0, 201.0) = 13 30 50.76 -1 58 47.4
  Extent = 19.6" x 19.6", rotation angle = 0
  Source counts = 5.1 +/- 17.4
  Background counts = 297.5
  Rate = 0.0002 +/- 0.0006
  Deleting source due to low Poisson probability