[Sat May 11 00:39:51 2013] Detection parameters:
  Position = (245.5, 414.9) = 13 31 10.64 -1 43 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 306.7 +/- 27.0
  Background counts = 102.2
  Rate = 0.01 +/- 0.0009

[Sat May 11 00:40:03 2013] Off-axis axis estimate = 9.27'
[Sat May 11 00:41:08 2013] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Sat May 11 00:41:08 2013] Initial guess for spatial extent in simple fitting = 11.07"
[Sat May 11 00:41:08 2013] source mask rpix=2.5, npix_max = 37, mask sum = 42, frac = 1.133
[Sat May 11 00:41:08 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.07"
[Sat May 11 00:41:09 2013] fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_src3.ximg exists
[Sat May 11 00:41:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_src3.csv
[Sat May 11 00:41:09 2013] fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May 11 00:41:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_src3.csv
[Sat May 11 00:41:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:41:13 2013] fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May 11 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May 11 00:41:13 2013] fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May 11 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May 11 00:41:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:41:57 2013] Warning, spatial fit 3 centroid is now closest to src. 33
[Sat May 11 00:41:57 2013] Vigneting correction estimate = 1.000000
[Sat May 11 00:41:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 00:41:57 2013] Assessing source extent using major
[Sat May 11 00:41:57 2013] Source does appear to be extended
[Sat May 11 00:41:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 00:41:57 2013] Source is confused with source 4
[Sat May 11 00:41:57 2013] Source is confused with source 34
[Sat May 11 00:41:57 2013] Source is confused with source 36
[Sat May 11 00:41:57 2013] Source is confused with source 38
[Sat May 11 00:41:57 2013] Source is confused with source 39
[Sat May 11 00:41:57 2013] Source is confused with source 41
[Sat May 11 00:42:58 2013] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Sat May 11 00:42:58 2013] Initial guess for spatial extent in simple fitting = 11.07"
[Sat May 11 00:42:58 2013] source mask rpix=2.5, npix_max = 37, mask sum = 42, frac = 1.133
[Sat May 11 00:42:58 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 11.07"
[Sat May 11 00:42:59 2013] fullrun_pn_xmm0112240301_pi300-10000_cl_pass1_src3.ximg exists
[Sat May 11 00:42:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240301_pi300-10000_cl_pass1_src3.csv
[Sat May 11 00:42:59 2013] fullrun_pn_xmm0112240301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat May 11 00:42:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240301_pi300-10000_cl_pass1_src3.csv
[Sat May 11 00:42:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:43:01 2013] fullrun_pn_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat May 11 00:43:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat May 11 00:43:01 2013] fullrun_pn_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat May 11 00:43:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat May 11 00:43:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:43:33 2013] Warning, spatial fit 3 centroid is now closest to src. 4
[Sat May 11 00:43:33 2013] Source 3 is offset by -0.479513 and -4.063735 pixels which is larger than
2 X fitted extent = 1.245591 x 1.245591, not incorporating fit results
[Sat May 11 00:43:34 2013] Vigneting correction estimate = 1.000000
[Sat May 11 00:43:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 00:43:34 2013] Assessing source extent using major
[Sat May 11 00:43:34 2013] Source does appear to be extended
[Sat May 11 00:43:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 00:44:29 2013] XMMSAS src. selection expression = ellipse(21308.256973, 36046.987030, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 00:44:29 2013] Not overwriting source region fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_src.reg
[Sat May 11 00:44:29 2013] Extracting stamp from image fullrun_pn_xmm0112240301_pi300-10000_cl_sm2.00.img.gz, (208, 377) - (283, 452)
[Sat May 11 00:44:29 2013] XMMSAS bgd. selection expression = annulus(21308.256973, 36046.987030, 1087.500000, 2175.000000, X, Y) && !ellipse(21341.864334, 35455.096039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21703.367813, 38523.216034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23358.952000, 37437.216000, 3482.800100, 3482.800100, 0.000000, X, Y) && !ellipse(22265.619385, 37353.633148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23041.995087, 36843.344482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20958.863083, 37273.265411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21907.494000, 36776.880000, 1828.992053, 1828.992053, 0.000000, X, Y) && !ellipse(23582.970581, 35883.025696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21829.179031, 35796.269958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22353.204000, 35506.642000, 1624.840047, 1624.840047, 0.000000, X, Y) && !ellipse(21906.036000, 35276.744000, 1705.360049, 1705.360049, 0.000000, X, Y) && !ellipse(22842.628937, 34833.176666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21707.565414, 34592.317719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22310.221222, 33697.028564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22934.530400, 32890.553400, 1481.728043, 1481.728043, 0.000000, X, Y)
[Sat May 11 00:44:29 2013] Writing fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3.gif
[Sat May 11 00:44:34 2013] ../../xmm0112240301/products/events/fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0112240301/products/events/fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat May 11 00:44:34 2013] Mean detx,y = (-1582.23, -9583.82) 
[Sat May 11 00:44:34 2013] ../../xmm0112240301/products/images/fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_src.img and ../../xmm0112240301/products/images/fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat May 11 00:44:34 2013] ../../xmm0112240301/products/spectra/fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0112240301/products/spectra/fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat May 11 00:44:34 2013] Setting source spectrum file to fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 11 00:44:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat May 11 00:44:34 2013] ../../xmm0112240301/products/lightcurves/fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0112240301/products/lightcurves/fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat May 11 00:45:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 00:45:02 2013] rmf not generated due to insufficient counts
[Sat May 11 00:45:02 2013] fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Sat May 11 01:55:03 2013] Updating aperture counts using extracted products
[Sat May 11 01:55:03 2013] Total counts from fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1546.00
[Sat May 11 01:55:03 2013] Total counts from fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1040.00
[Sat May 11 01:55:03 2013] Got source and background scale factors 1224400.000000, 1806794.000000
[Sat May 11 01:55:03 2013] User source parameters:
  Position = (245.5, 414.9) = 13 31 10.64 -1 43 15.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 841.2 +/- 40.3
  Background aperture counts = 704.8
  Rate = 0.03 +/- 0.001

[Sat May 11 01:55:03 2013] Updating counts from extracted products
[Sat May 11 01:55:03 2013] Set source signif. to 841.23/26.55 = 31.69
[Sat May 11 01:55:20 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 01:55:20 2013] Using photon index=1.80, rate=0.0305, arf fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3.arf
[Sat May 11 01:55:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 01:55:20 2013] Updating source flux to 1.6e-13
[Sat May 11 01:56:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 01:56:26 2013] xmm0112240301/analysis//spectral/fullrun_pn_xmm0112240301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete