[Sat May 11 00:40:11 2013] Detection parameters:
  Position = (310.1, 333.1) = 13 30 51.89 -1 49 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.0 +/- 13.2
  Background counts = 48.2
  Rate = 0.003 +/- 0.0004

[Sat May 11 00:40:14 2013] Off-axis axis estimate = 2.65'
[Sat May 11 00:41:20 2013] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sat May 11 00:41:20 2013] Initial guess for spatial extent in simple fitting = 7.75"
[Sat May 11 00:41:20 2013] source mask rpix=1.8, npix_max = 20, mask sum = 11, frac = 0.528
[Sat May 11 00:41:20 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 7.75"
[Sat May 11 00:41:22 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src43.ximg exists
[Sat May 11 00:41:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src43.csv
[Sat May 11 00:41:22 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src43_1.ximg exists
[Sat May 11 00:41:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src43.csv
[Sat May 11 00:41:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:41:24 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sat May 11 00:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sat May 11 00:41:24 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sat May 11 00:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sat May 11 00:41:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:42:33 2013] Source 38 is offset by -6.504877 and 1.305802 pixels which is larger than
2 X fitted extent = 1.221563 x 1.221563, not incorporating fit results
[Sat May 11 00:42:33 2013] Spatial fit model total counts = 636.193000, observed total counts = 565.000000
[Sat May 11 00:42:33 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 00:42:33 2013] Vigneting correction estimate = 1.000000
[Sat May 11 00:42:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 00:42:33 2013] Assessing source extent using major
[Sat May 11 00:42:33 2013] Source does appear to be extended
[Sat May 11 00:42:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 00:43:06 2013] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sat May 11 00:43:06 2013] Initial guess for spatial extent in simple fitting = 7.75"
[Sat May 11 00:43:06 2013] source mask rpix=1.8, npix_max = 20, mask sum = 11, frac = 0.528
[Sat May 11 00:43:06 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 7.75"
[Sat May 11 00:43:07 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src38.ximg exists
[Sat May 11 00:43:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src38.csv
[Sat May 11 00:43:07 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src38_1.ximg exists
[Sat May 11 00:43:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src38.csv
[Sat May 11 00:43:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:43:08 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sat May 11 00:43:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sat May 11 00:43:08 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sat May 11 00:43:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sat May 11 00:43:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:44:01 2013] Spatial fit model total counts = 635.931000, observed total counts = 565.000000
[Sat May 11 00:44:01 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 00:44:01 2013] Vigneting correction estimate = 1.000000
[Sat May 11 00:44:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 00:44:01 2013] Assessing source extent using major
[Sat May 11 00:44:01 2013] Source does appear to be extended
[Sat May 11 00:44:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 00:45:16 2013] XMMSAS src. selection expression = ellipse(26930.399658, 28929.312805, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 00:45:16 2013] Not overwriting source region fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src38_src.reg
[Sat May 11 00:45:16 2013] Extracting stamp from image fullrun_mos2_xmm0112240301_pi300-10000_cl_sm2.00.img.gz, (273, 296) - (348, 371)
[Sat May 11 00:45:16 2013] XMMSAS bgd. selection expression = annulus(26930.399658, 28929.312805, 1087.500000, 2175.000000, X, Y) && !ellipse(27350.090759, 25956.675629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28130.372009, 26146.621735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27575.160248, 26899.861511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26982.284241, 27167.915924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27228.142609, 27939.430267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27903.274078, 27356.972595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28543.426000, 27319.387800, 1253.128036, 1253.128036, 0.000000, X, Y) && !ellipse(25887.647522, 26652.919891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25338.616000, 27286.384000, 1077.768031, 1077.768031, 0.000000, X, Y) && !ellipse(29825.748932, 26337.037781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25000.689850, 26566.973938, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 00:45:16 2013] Writing fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src38.gif
[Sat May 11 00:53:32 2013] Mean detx,y = (-860.97, 800.52) 
[Sat May 11 00:53:33 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 00:53:41 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 00:53:41 2013] Setting source spectrum file to fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat May 11 00:53:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat May 11 01:40:24 2013] Not generating rmf since there are only 78 counts
[Sat May 11 01:40:24 2013] rmf not generated due to insufficient counts
[Sat May 11 01:55:49 2013] Updating aperture counts using extracted products
[Sat May 11 01:55:49 2013] Total counts from fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 386.00
[Sat May 11 01:55:49 2013] Total counts from fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src38_bgd.pi.gz = 1548.00
[Sat May 11 01:55:49 2013] Got source and background scale factors 1154648.000000, 6569924.000000
[Sat May 11 01:55:49 2013] User source parameters:
  Position = (310.1, 333.1) = 13 30 51.89 -1 49 14.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 113.9 +/- 20.7
  Background aperture counts = 272.1
  Rate = 0.003 +/- 0.0006

[Sat May 11 01:55:49 2013] Updating counts from extracted products
[Sat May 11 01:55:49 2013] Set source signif. to 113.94/16.49 = 6.91
[Sat May 11 01:55:53 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 01:55:53 2013] Using photon index=1.80, rate=0.0034, arf fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src38.arf
[Sat May 11 01:55:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 01:55:53 2013] Updating source flux to 3.6e-14
[Sat May 11 01:56:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 01:56:13 2013] xmm0112240301/analysis//spectral/fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete