[Sat May 11 00:40:11 2013] Detection parameters:
  Position = (247.2, 382.5) = 13 31 10.14 -1 45 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.4 +/- 12.8
  Background counts = 35.2
  Rate = 0.003 +/- 0.0006

[Sat May 11 00:40:14 2013] Off-axis axis estimate = 7.14'
[Sat May 11 00:41:20 2013] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Sat May 11 00:41:20 2013] Initial guess for spatial extent in simple fitting = 10.00"
[Sat May 11 00:41:20 2013] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.862
[Sat May 11 00:41:20 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 10.00"
[Sat May 11 00:41:21 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src27.ximg exists
[Sat May 11 00:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src27.csv
[Sat May 11 00:41:21 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat May 11 00:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src27.csv
[Sat May 11 00:41:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:41:24 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat May 11 00:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat May 11 00:41:24 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat May 11 00:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat May 11 00:41:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:42:33 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 12.792222 pixels away
[Sat May 11 00:42:33 2013] Vigneting correction estimate = 1.000000
[Sat May 11 00:42:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 00:42:33 2013] Assessing source extent using major
[Sat May 11 00:42:33 2013] Source does appear to be extended
[Sat May 11 00:42:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 00:43:06 2013] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Sat May 11 00:43:06 2013] Initial guess for spatial extent in simple fitting = 10.00"
[Sat May 11 00:43:06 2013] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.862
[Sat May 11 00:43:06 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 10.00"
[Sat May 11 00:43:07 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src24.ximg exists
[Sat May 11 00:43:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src24.csv
[Sat May 11 00:43:07 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src24_1.ximg exists
[Sat May 11 00:43:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src24.csv
[Sat May 11 00:43:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:43:08 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sat May 11 00:43:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sat May 11 00:43:08 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sat May 11 00:43:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sat May 11 00:43:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:44:01 2013] Spatial fit model total counts = 461.158000, observed total counts = 378.000000
[Sat May 11 00:44:01 2013] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 00:44:01 2013] Vigneting correction estimate = 1.000000
[Sat May 11 00:44:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 00:44:01 2013] Assessing source extent using major
[Sat May 11 00:44:01 2013] Source does appear to be extended
[Sat May 11 00:44:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 00:45:15 2013] XMMSAS src. selection expression = ellipse(21457.818756, 33228.360138, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 00:45:15 2013] Not overwriting source region fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src33_src.reg
[Sat May 11 00:45:15 2013] Extracting stamp from image fullrun_mos2_xmm0112240301_pi300-10000_cl_sm2.00.img.gz, (210, 345) - (285, 420)
[Sat May 11 00:45:15 2013] XMMSAS bgd. selection expression = annulus(21457.818756, 33228.360138, 1087.500000, 2175.000000, X, Y) && !ellipse(21158.436000, 35555.836000, 1113.328032, 1113.328032, 0.000000, X, Y) && !ellipse(21545.421448, 34760.354523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20114.098000, 34264.126000, 1717.976049, 1717.976049, 0.000000, X, Y) && !ellipse(22183.138245, 35188.963867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22786.196289, 32841.997620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22853.686000, 35523.006000, 1693.800049, 1693.800049, 0.000000, X, Y)
[Sat May 11 00:45:15 2013] Writing fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src33.gif
[Sat May 11 00:48:51 2013] Mean detx,y = (2689.27, 6808.15) 
[Sat May 11 00:48:53 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 00:49:13 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 00:49:13 2013] Setting source spectrum file to fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat May 11 00:49:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat May 11 01:34:55 2013] Not generating rmf since there are only 69 counts
[Sat May 11 01:34:55 2013] rmf not generated due to insufficient counts
[Sat May 11 01:55:47 2013] Updating aperture counts using extracted products
[Sat May 11 01:55:47 2013] Total counts from fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 275.00
[Sat May 11 01:55:47 2013] Total counts from fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src33_bgd.pi.gz = 576.00
[Sat May 11 01:55:47 2013] Got source and background scale factors 1052780.000000, 3503051.000000
[Sat May 11 01:55:47 2013] User source parameters:
  Position = (247.2, 382.5) = 13 31 10.14 -1 45 40.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 101.9 +/- 17.6
  Background aperture counts = 173.1
  Rate = 0.003 +/- 0.0005

[Sat May 11 01:55:47 2013] Updating counts from extracted products
[Sat May 11 01:55:47 2013] Set source signif. to 101.89/13.16 = 7.74
[Sat May 11 01:55:53 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 01:55:53 2013] Using photon index=1.80, rate=0.00304, arf fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src33.arf
[Sat May 11 01:55:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 01:55:53 2013] Updating source flux to 5.5e-14
[Sat May 11 01:56:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 01:56:13 2013] xmm0112240301/analysis//spectral/fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete