[Sat May 11 00:40:10 2013] Detection parameters:
  Position = (321.5, 285.9) = 13 30 48.58 -1 52 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 240.2 +/- 23.6
  Background counts = 74.3
  Rate = 0.008 +/- 0.0008

[Sat May 11 00:40:14 2013] Off-axis axis estimate = 1.91'
[Sat May 11 00:41:20 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Sat May 11 00:41:20 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Sat May 11 00:41:20 2013] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.984
[Sat May 11 00:41:20 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 7.38"
[Sat May 11 00:41:21 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src9.ximg exists
[Sat May 11 00:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src9.csv
[Sat May 11 00:41:21 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat May 11 00:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src9.csv
[Sat May 11 00:41:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:41:23 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat May 11 00:41:23 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat May 11 00:41:23 2013] Fit fullrun_mos2_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat May 11 00:42:33 2013] Spatial fit model total counts = 2554.280000, observed total counts = 2343.000000
[Sat May 11 00:42:33 2013] Offset between fit and detection position for source 19 = 0.497083 pixels
[Sat May 11 00:42:33 2013] Warning, changing simple spatial fit ID from 9 to 5
[Sat May 11 00:42:33 2013] 2573.593000 total counts/ 2231.250000 bgd. counts: snr = 7.247485
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.497083 pixels
  Position = (321.7, 286.3) = 13 30 48.52 -1 52 36.2
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source counts = 342.3 +/- 50.7
  Background counts = 2231.2
  Rate = 0.01 +/- 0.002
[Sat May 11 00:42:33 2013] Vigneting correction estimate = 1.000000
[Sat May 11 00:42:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 00:42:33 2013] Assessing source extent using major axis lower bound
[Sat May 11 00:42:33 2013] Source does appear to be extended
[Sat May 11 00:42:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 00:42:33 2013] Source is confused with source 17
[Sat May 11 00:43:06 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 00:43:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 00:43:06 2013] Initial guess for spatial extent in simple fitting = 14.47"
[Sat May 11 00:43:06 2013] source mask rpix=3.3, npix_max = 58, mask sum = 40, frac = 0.683
[Sat May 11 00:43:06 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 14.47"
[Sat May 11 00:43:07 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src9.ximg exists
[Sat May 11 00:43:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src9.csv
[Sat May 11 00:43:07 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat May 11 00:43:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src9.csv
[Sat May 11 00:43:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:43:08 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat May 11 00:43:08 2013] fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat May 11 00:43:08 2013] Fit fullrun_mos2_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat May 11 00:44:01 2013] Warning, spatial fit 9 centroid is now closest to src. 52
[Sat May 11 00:44:01 2013] Spatial fit model total counts = 1622.000000, observed total counts = 1460.000000
[Sat May 11 00:44:01 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 00:44:01 2013] Vigneting correction estimate = 1.000000
[Sat May 11 00:44:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 00:44:01 2013] Assessing source extent using major axis lower bound
[Sat May 11 00:44:01 2013] Source does appear to be extended
[Sat May 11 00:44:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 00:45:14 2013] XMMSAS src. selection expression = ellipse(27941.946000, 24862.858000, 868.158025, 868.158025, 0.000000, X, Y)
[Sat May 11 00:45:14 2013] Not overwriting source region fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_src.reg
[Sat May 11 00:45:14 2013] Extracting stamp from image fullrun_mos2_xmm0112240301_pi300-10000_cl_sm2.00.img.gz, (272, 236) - (372, 336)
[Sat May 11 00:45:15 2013] XMMSAS bgd. selection expression = annulus(27941.946000, 24862.858000, 1446.930042, 2893.860083, X, Y) && !ellipse(27350.090759, 25956.675629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27706.310730, 25183.586853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28285.916901, 25553.711212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28130.372009, 26146.621735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27575.160248, 26899.861511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27436.790741, 21404.511078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28247.413666, 24326.782349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26982.284241, 27167.915924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29101.600600, 24825.966000, 1278.216037, 1278.216037, 0.000000, X, Y) && !ellipse(25677.128000, 24459.128000, 1096.744032, 1096.744032, 0.000000, X, Y) && !ellipse(29092.408600, 25794.004639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26334.504800, 23243.375800, 364.464010, 364.464010, 0.000000, X, Y) && !ellipse(28507.941071, 23715.329102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27228.142609, 27939.430267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29260.984375, 24233.216461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27903.274078, 27356.972595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28543.426000, 27319.387800, 1253.128036, 1253.128036, 0.000000, X, Y) && !ellipse(25887.647522, 26652.919891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25338.616000, 27286.384000, 1077.768031, 1077.768031, 0.000000, X, Y) && !ellipse(29825.748932, 26337.037781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25000.689850, 26566.973938, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 00:45:15 2013] Writing fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19.gif
[Sat May 11 00:45:17 2013] ../../xmm0112240301/products/events/fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0112240301/products/events/fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Sat May 11 00:45:17 2013] Mean detx,y = (-336.81, -3253.72) 
[Sat May 11 00:45:17 2013] ../../xmm0112240301/products/images/fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_src.img and ../../xmm0112240301/products/images/fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Sat May 11 00:45:17 2013] ../../xmm0112240301/products/spectra/fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0112240301/products/spectra/fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Sat May 11 00:45:17 2013] Setting source spectrum file to fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat May 11 00:45:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat May 11 00:45:17 2013] ../../xmm0112240301/products/lightcurves/fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0112240301/products/lightcurves/fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Sat May 11 01:55:44 2013] Updating aperture counts using extracted products
[Sat May 11 01:55:44 2013] Total counts from fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 2411.00
[Sat May 11 01:55:44 2013] Total counts from fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_bgd.pi.gz = 1887.00
[Sat May 11 01:55:44 2013] Got source and background scale factors 2117920.000000, 5885428.000000
[Sat May 11 01:55:44 2013] User source parameters:
  Position = (321.7, 286.3) = 13 30 48.52 -1 52 36.2
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source aperture counts = 1731.9 +/- 50.1
  Background aperture counts = 679.1
  Rate = 0.05 +/- 0.001

[Sat May 11 01:55:52 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 01:55:52 2013] Using photon index=1.80, rate=0.0102, arf fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19.arf
[Sat May 11 01:55:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 01:55:52 2013] Updating source flux to 1e-13
[Sat May 11 01:56:05 2013] Flag p found in src. 19 procflags, skipping spectral fitting
[Sat May 11 01:56:05 2013] Flag c found in src. 19 procflags, skipping spectral fitting
[Sat May 11 01:56:13 2013] xmm0112240301/analysis//spectral/fullrun_mos2_xmm0112240301_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete