[Sat May 11 00:40:06 2013] Detection parameters:
  Position = (315.0, 298.1) = 13 30 50.48 -1 51 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 579.5 +/- 33.3
  Background counts = 66.3
  Rate = 0.02 +/- 0.001

[Sat May 11 00:40:08 2013] Off-axis axis estimate = 1.20'
[Sat May 11 00:41:17 2013] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Sat May 11 00:41:17 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Sat May 11 00:41:17 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.894
[Sat May 11 00:41:17 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.03"
[Sat May 11 00:41:18 2013] fullrun_mos1_xmm0112240301_pi300-10000_cl_pass0_src4.ximg exists
[Sat May 11 00:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112240301_pi300-10000_cl_pass0_src4.csv
[Sat May 11 00:41:18 2013] fullrun_mos1_xmm0112240301_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat May 11 00:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112240301_pi300-10000_cl_pass0_src4.csv
[Sat May 11 00:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112240301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112240301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:41:19 2013] fullrun_mos1_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat May 11 00:41:19 2013] fullrun_mos1_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat May 11 00:41:19 2013] Fit fullrun_mos1_xmm0112240301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sat May 11 00:42:14 2013] Spatial fit model total counts = 2729.490000, observed total counts = 2724.000000
[Sat May 11 00:42:14 2013] Offset between fit and detection position for source 28 = 1.046453 pixels
[Sat May 11 00:42:14 2013] 2713.048000 total counts/ 2306.240000 bgd. counts: snr = 8.471050
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.046453 pixels
  Position = (315.2, 299.1) = 13 30 50.40 -1 51 40.8
  Extent = 12.2 (9.4-14.1)", rotation angle = 0
  Source counts = 406.8 +/- 52.1
  Background counts = 2306.2
  Rate = 0.01 +/- 0.002
[Sat May 11 00:42:14 2013] Vigneting correction estimate = 1.000000
[Sat May 11 00:42:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 00:42:14 2013] Assessing source extent using major axis lower bound
[Sat May 11 00:42:14 2013] Source does appear to be extended
[Sat May 11 00:42:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 00:42:14 2013] Source is confused with source 27
[Sat May 11 00:42:14 2013] Source is confused with source 31
[Sat May 11 00:43:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 00:43:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 00:43:03 2013] Initial guess for spatial extent in simple fitting = 12.23"
[Sat May 11 00:43:03 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.958
[Sat May 11 00:43:03 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 12.23"
[Sat May 11 00:43:04 2013] fullrun_mos1_xmm0112240301_pi300-10000_cl_pass1_src4.ximg exists
[Sat May 11 00:43:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112240301_pi300-10000_cl_pass1_src4.csv
[Sat May 11 00:43:04 2013] fullrun_mos1_xmm0112240301_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat May 11 00:43:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112240301_pi300-10000_cl_pass1_src4.csv
[Sat May 11 00:43:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112240301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112240301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:43:04 2013] fullrun_mos1_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat May 11 00:43:04 2013] fullrun_mos1_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat May 11 00:43:04 2013] Fit fullrun_mos1_xmm0112240301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat May 11 00:43:47 2013] Warning, spatial fit 4 centroid is now closest to src. 27
[Sat May 11 00:43:47 2013] Vigneting correction estimate = 1.000000
[Sat May 11 00:43:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 00:43:47 2013] Assessing source extent using major axis lower bound
[Sat May 11 00:43:47 2013] Source does appear to be extended
[Sat May 11 00:43:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 00:45:02 2013] XMMSAS src. selection expression = ellipse(27377.536200, 25972.423680, 733.752021, 733.752021, 0.000000, X, Y)
[Sat May 11 00:45:02 2013] Not overwriting source region fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_src.reg
[Sat May 11 00:45:02 2013] Extracting stamp from image fullrun_mos1_xmm0112240301_pi300-10000_cl_sm2.00.img.gz, (273, 257) - (357, 341)
[Sat May 11 00:45:02 2013] XMMSAS bgd. selection expression = annulus(27377.536200, 25972.423680, 1222.920035, 2445.840070, X, Y) && !ellipse(28193.106000, 26007.720000, 1221.992035, 1221.992035, 0.000000, X, Y) && !ellipse(28776.882263, 26394.795288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26271.334000, 26491.724000, 1089.752031, 1089.752031, 0.000000, X, Y) && !ellipse(27009.041626, 26909.385101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29359.999320, 24118.893680, 457.802413, 457.802413, 0.000000, X, Y) && !ellipse(28959.096924, 26821.925781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25893.074402, 26832.901672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29702.133423, 24931.021881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26022.326000, 24877.816000, 1102.344032, 1102.344032, 0.000000, X, Y) && !ellipse(28932.928955, 27422.296936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25673.816772, 27869.247223, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 00:45:02 2013] Writing fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28.gif
[Sat May 11 00:45:03 2013] ../../xmm0112240301/products/events/fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0112240301/products/events/fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create
[Sat May 11 00:45:03 2013] Mean detx,y = (-1929.24, 9.25) 
[Sat May 11 00:45:03 2013] ../../xmm0112240301/products/images/fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_src.img and ../../xmm0112240301/products/images/fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create
[Sat May 11 00:45:03 2013] ../../xmm0112240301/products/spectra/fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_src_b10.pi.gz and ../../xmm0112240301/products/spectra/fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create
[Sat May 11 00:45:03 2013] Setting source spectrum file to fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat May 11 00:45:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat May 11 00:45:03 2013] ../../xmm0112240301/products/lightcurves/fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0112240301/products/lightcurves/fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create
[Sat May 11 00:45:14 2013] fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28.rmf exists, delete to re-create
[Sat May 11 00:45:14 2013] fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28.arf exists, delete to re-create
[Sat May 11 01:55:26 2013] Updating aperture counts using extracted products
[Sat May 11 01:55:26 2013] Total counts from fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 2446.00
[Sat May 11 01:55:26 2013] Total counts from fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_bgd.pi.gz = 2285.00
[Sat May 11 01:55:26 2013] Got source and background scale factors 1684800.000000, 4200780.000000
[Sat May 11 01:55:26 2013] User source parameters:
  Position = (315.2, 299.1) = 13 30 50.40 -1 51 40.8
  Extent = 12.2 (9.4-14.1)", rotation angle = 0
  Source aperture counts = 1529.6 +/- 50.5
  Background aperture counts = 916.4
  Rate = 0.05 +/- 0.002

[Sat May 11 01:55:41 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 01:55:41 2013] Using photon index=1.80, rate=0.0121, arf fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28.arf
[Sat May 11 01:55:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 01:55:41 2013] Updating source flux to 1.2e-13
[Sat May 11 01:55:57 2013] Flag c found in src. 28 procflags, skipping spectral fitting
[Sat May 11 01:56:05 2013] xmm0112240301/analysis//spectral/fullrun_mos1_xmm0112240301_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete