[Thu Jun  6 20:01:33 2013] Detection parameters:
  Position = (351.9, 318.3) = 15 22 26.03 27 42 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1094.0 +/- 48.7
  Background counts = 377.6
  Rate = 0.07 +/- 0.003

[Thu Jun  6 20:01:34 2013] Off-axis axis estimate = 4.13'
[Thu Jun  6 20:04:53 2013] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 20:04:53 2013] Initial guess for spatial extent in simple fitting = 8.50"
[Thu Jun  6 20:04:53 2013] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.748
[Thu Jun  6 20:04:53 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 8.50"
[Thu Jun  6 21:39:14 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src8.ximg exists
[Thu Jun  6 21:39:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src8.csv
[Thu Jun  6 21:39:14 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Jun  6 21:39:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src8.csv
[Thu Jun  6 21:39:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 21:39:15 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Jun  6 21:39:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu Jun  6 21:39:15 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jun  6 21:39:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu Jun  6 21:39:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 01:55:53 2013] Spatial fit model total counts = 8927.170000, observed total counts = 7682.000000
[Fri Jun  7 01:55:53 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 01:55:53 2013] Spatial fit model total counts = 11077.800000, observed total counts = 7357.000000
[Fri Jun  7 01:55:53 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 01:55:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 01:55:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 01:55:53 2013] Assessing source extent using major
[Fri Jun  7 01:55:53 2013] Source does appear to be extended
[Fri Jun  7 01:55:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 01:55:53 2013] Source is confused with source 6
[Fri Jun  7 01:56:36 2013] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 01:56:36 2013] Initial guess for spatial extent in simple fitting = 8.50"
[Fri Jun  7 01:56:36 2013] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.748
[Fri Jun  7 01:56:36 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 8.50"
[Fri Jun  7 03:52:30 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun  7 03:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src7.csv
[Fri Jun  7 03:52:30 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun  7 03:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src7.csv
[Fri Jun  7 03:52:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 03:52:31 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun  7 03:52:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jun  7 03:52:31 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun  7 03:52:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jun  7 03:52:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 08:50:39 2013] Spatial fit model total counts = 8923.170000, observed total counts = 7682.000000
[Fri Jun  7 08:50:39 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 08:50:39 2013] Warning, spatial fit 7 centroid is now closest to src. 4
[Fri Jun  7 08:50:39 2013] Spatial fit model total counts = 7553.540000, observed total counts = 5537.000000
[Fri Jun  7 08:50:39 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 08:50:39 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 08:50:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 08:50:39 2013] Assessing source extent using major
[Fri Jun  7 08:50:39 2013] Source does appear to be extended
[Fri Jun  7 08:50:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 08:51:07 2013] Counts = 1094.013062, rescaling region sizes by 2.000000
[Fri Jun  7 08:51:07 2013] XMMSAS src. selection expression = ellipse(30565.947205, 27640.203156, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun  7 08:51:07 2013] Writing source region out to fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src8_src.reg
[Fri Jun  7 08:51:07 2013] Extracting stamp from image fullrun_pn_xmm0112240201_pi300-10000_cl_sm2.00.img.gz, (277, 243) - (427, 393)
[Fri Jun  7 08:51:07 2013] XMMSAS bgd. selection expression = annulus(30565.947205, 27640.203156, 4350.000000, 8700.000000, X, Y) && !ellipse(29634.939941, 27089.974884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30642.125305, 29076.789062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29890.823700, 29112.655853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31352.404053, 29112.722229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30919.992706, 28132.811981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32446.005310, 26159.267639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31020.480255, 26752.804749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31460.378784, 25713.100586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29935.428600, 24666.292400, 414.231212, 279.447208, 353.543164, X, Y) && !ellipse(27929.874817, 20669.738358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22469.769897, 35806.932556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29556.155600, 35117.016000, 459.153613, 244.179207, 21.291683, X, Y) && !ellipse(31819.251129, 31544.123718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32260.466553, 30921.646790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29394.718201, 30521.276337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31356.338806, 30043.182556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31981.988700, 30447.841800, 1147.288033, 1147.288033, 0.000000, X, Y) && !ellipse(21947.293320, 29762.553925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31936.343231, 29516.923889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34454.561523, 18327.472839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32526.872192, 29013.923279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32382.730652, 27966.046936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32185.005310, 27029.599518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32350.926056, 26599.052002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31916.433167, 25698.983795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32319.530334, 24641.177643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23399.539200, 32832.154420, 681.169620, 681.169620, 0.000000, X, Y) && !ellipse(32967.954865, 32245.850616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32401.597290, 31907.958313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31183.719421, 31457.460907, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 08:51:07 2013] Writing fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src8.gif
[Fri Jun  7 08:58:16 2013] Mean detx,y = (3672.19, 1574.23) 
[Fri Jun  7 08:58:20 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 09:01:52 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 09:01:52 2013] Setting source spectrum file to fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun  7 09:01:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Jun  7 09:50:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  7 09:50:11 2013] rmf not generated due to insufficient counts
[Sat Jun  8 10:50:39 2013] Updating aperture counts using extracted products
[Sat Jun  8 10:50:39 2013] Total counts from fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 21299.00
[Sat Jun  8 10:50:39 2013] Total counts from fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src8_bgd.pi.gz = 82604.00
[Sat Jun  8 10:50:39 2013] Got source and background scale factors 3967276.000000, 151428527.000000
[Sat Jun  8 10:50:39 2013] User source parameters:
  Position = (351.9, 318.3) = 15 22 26.03 27 42 44.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 19134.9 +/- 146.9
  Background aperture counts = 2164.1
  Rate = 1 +/- 0.008

[Sat Jun  8 10:50:39 2013] Updating counts from extracted products
[Sat Jun  8 10:50:39 2013] Set source signif. to 19134.86/46.52 = 411.32
[Sat Jun  8 10:50:50 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 10:50:50 2013] Using photon index=1.80, rate=1.03, arf fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src8.arf
[Sat Jun  8 10:50:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 10:50:50 2013] Updating source flux to 3.3e-12
[Sat Jun  8 10:51:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 10:51:33 2013] xmm0112240201/analysis//spectral/fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete