[Thu Jun  6 20:01:33 2013] Detection parameters:
  Position = (356.0, 323.9) = 15 22 24.69 27 43 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 680.3 +/- 44.6
  Background counts = 377.0
  Rate = 0.04 +/- 0.003

[Thu Jun  6 20:01:34 2013] Off-axis axis estimate = 4.56'
[Thu Jun  6 20:04:53 2013] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 20:04:53 2013] Initial guess for spatial extent in simple fitting = 8.71"
[Thu Jun  6 20:04:53 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.998
[Thu Jun  6 20:04:53 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 8.71"
[Thu Jun  6 21:39:14 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jun  6 21:39:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src6.csv
[Thu Jun  6 21:39:14 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jun  6 21:39:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src6.csv
[Thu Jun  6 21:39:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 21:39:15 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jun  6 21:39:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun  6 21:39:15 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jun  6 21:39:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun  6 21:39:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 01:55:53 2013] Warning, spatial fit 6 centroid is now closest to src. 8
[Fri Jun  7 01:55:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 01:55:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 01:55:53 2013] Assessing source extent using major
[Fri Jun  7 01:55:53 2013] Source does appear to be extended
[Fri Jun  7 01:55:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 01:55:53 2013] Source is confused with source 8
[Fri Jun  7 01:56:36 2013] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 01:56:36 2013] Initial guess for spatial extent in simple fitting = 8.71"
[Fri Jun  7 01:56:36 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.998
[Fri Jun  7 01:56:36 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 8.71"
[Fri Jun  7 03:52:30 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun  7 03:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src6.csv
[Fri Jun  7 03:52:30 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun  7 03:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src6.csv
[Fri Jun  7 03:52:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 03:52:31 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun  7 03:52:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun  7 03:52:31 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun  7 03:52:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun  7 03:52:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 08:50:39 2013] Warning, spatial fit 6 centroid is now closest to src. 8
[Fri Jun  7 08:50:39 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 08:50:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 08:50:39 2013] Assessing source extent using major
[Fri Jun  7 08:50:39 2013] Source does appear to be extended
[Fri Jun  7 08:50:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 08:51:06 2013] XMMSAS src. selection expression = ellipse(30919.992706, 28132.811981, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  7 08:51:06 2013] Writing source region out to fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src6_src.reg
[Fri Jun  7 08:51:06 2013] Extracting stamp from image fullrun_pn_xmm0112240201_pi300-10000_cl_sm2.00.img.gz, (318, 286) - (393, 361)
[Fri Jun  7 08:51:07 2013] XMMSAS bgd. selection expression = annulus(30919.992706, 28132.811981, 1087.500000, 2175.000000, X, Y) && !ellipse(29634.939941, 27089.974884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30642.125305, 29076.789062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29890.823700, 29112.655853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31352.404053, 29112.722229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30565.947205, 27640.203156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32446.005310, 26159.267639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31020.480255, 26752.804749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31460.378784, 25713.100586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32260.466553, 30921.646790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29394.718201, 30521.276337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31356.338806, 30043.182556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31981.988700, 30447.841800, 1147.288033, 1147.288033, 0.000000, X, Y) && !ellipse(31936.343231, 29516.923889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32526.872192, 29013.923279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32382.730652, 27966.046936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32185.005310, 27029.599518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32350.926056, 26599.052002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31916.433167, 25698.983795, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 08:51:07 2013] Writing fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src6.gif
[Fri Jun  7 08:57:39 2013] Mean detx,y = (4291.41, 1302.77) 
[Fri Jun  7 08:57:43 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 08:58:01 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 08:58:01 2013] Setting source spectrum file to fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun  7 08:58:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jun  7 09:50:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  7 09:50:00 2013] rmf not generated due to insufficient counts
[Sat Jun  8 10:50:38 2013] Updating aperture counts using extracted products
[Sat Jun  8 10:50:38 2013] Total counts from fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 5341.00
[Sat Jun  8 10:50:39 2013] Total counts from fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src6_bgd.pi.gz = 4367.00
[Sat Jun  8 10:50:39 2013] Got source and background scale factors 1157575.000000, 883583.000000
[Sat Jun  8 10:50:39 2013] User source parameters:
  Position = (356.0, 323.9) = 15 22 24.69 27 43 9.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -380.2 +/- 74.1
  Background aperture counts = 5721.2
  Rate = -0.02 +/- 0.004

[Sat Jun  8 10:50:39 2013] Updating counts from extracted products
[Sat Jun  8 10:50:39 2013] Set source signif. to -380.17/75.64 = -5.03
[Sat Jun  8 10:50:50 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 10:50:50 2013] Using photon index=1.80, rate=-0.0204, arf fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src6.arf
[Sat Jun  8 10:50:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 10:50:50 2013] Updated flux is not positive, keeping original flux
[Sat Jun  8 10:51:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 10:51:33 2013] xmm0112240201/analysis//spectral/fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete